Toyota 4 runner washer bottle relocation "AQUA TANK" RAGO FABRICATION

[@serendipityguy]

Find center is easy: Duck tape a "FLAT HEAD TACK" to the cap of the Aqua Tank & then place the cover down where it is perfectly aligned then press down on the area of the tack. Now you have a mark to drill from. Then from bottom, use the Hole Saw & you will now have center.

[@lightningdronesolutions7167]

They forgot to mention that you have to remove air deflector

[@2-old-Forthischet]

Reminds me of the fancy oil catch cans that are for the wow factor.

[@aumiller1994]

Put a thumb tack on the lid and press down on the plastic cover. Your tack hole will mark center.

[@serendipityguy]

I did not see your post, but you thought of this first and they did not see it. Bravo

[@jailbreakoverlander]

I want this because I have the metaltech fortress installed which leaves the bottom of WWR showing. I want it gone will this work??

[@4points4x46]

Hi Richie, Did you end up getting one of these? How did it fit with your bumper, etc? Cheers Mike

[@AndrewA6]

Kick ass mod....wish you guys had this 2 years ago before i bought the expedition one relocation kit...which is absolute ass...looks like im going to need this!!!

[@chrisfuckinfowler]

why is the expedition one kit "ass"?

[@AndrewA6]

@@chrisfuckinfowler The fact that you have to relocate the air compressor or whatever it is sucked. takes a good portion of real estate that can be used for other mod. maybe ass is a bit harsh but this one from rago looks much better.

[@bbreed1]

Will that fit with a magnuson supercharger kit

[@Toyota4runnerman1120]

Will it fit with a Magnuson supercharger? And how much fluid does it hold compared to the OEM?

[@magiriano]

My OWM tank has 3 holes with the 3rd one being something that looks like a level sensor? What do I do?

[@RedDevilTuning]

Is this compatible with your hidden behind the bumper LED bar mounts?

[@RagoFabrication]

ITS ISNT. COMPATIBLE. 😥

[@Chuckles527]

does winch get in the way of installing this?

[@lightningdronesolutions7167]

I hope someone answers this

[@4runner_litty]

Mines otw

[@swiftmarket4734]

Why do this mod? What’s the purpose?

[@AndrewA6]

the 4runner wiper fluid res hangs super low in front of passenger tire...so if you do a viper cut or get high clearance bumper you can see the reservoir hanging. this mod brings its up high.

[@swiftmarket4734]

Ahh. Got it.

[@4points4x46]

For me, running 35s, the washer take was in the way so I deleted it. I’m hoping that I will be able to use this and have a washer tank again.

[@jdown86]

@@4points4x46 Hey if your still in the market for a washer tank check out expedition one. They have one for the fj/4runner, it relocates the tank behind the passenger side headlight

[@4points4x46]

I did check out Expedition One, I didn’t buy it was not compatible with my air compressor mount. So it wasn’t an option. I did get the Aqua Tank and the only issue I had was the it didn’t clear my full size bumper. I had to make a right angle bracket that allowed me to rotate the tank 90 degrees counter clockwise. Then I had to get longer tank hoses and extend the control wires. It was more work but I like the results. I just wish Rago would consider full size bumpers in the design to make the mounting easier. It’s a solid product if you can fit it!

[@albertsandoval9494]

10 Minute install????...LOL