Toyota 4Runner cranks no start

1991/92 Toyota 4Runner cranks over but won’t start, fuel pump is good, 50 psi, holds pressure to the tank side, pressure on engine side is 38 and quickly leaks to 0.

[@TheWeirdSide1]

FYI, it's called a Fuel Damper...middle back of engine attached to fuel rail. They leak sometimes. Make sure you don't buy cheap imports which have innate design flaw and will leak too. I'm looking forward to watching the ground wire video...fingers crossed it's my issue too

[@joetrueblood7663]

Fist thing i can tell you is I'm having the same issue, but i did crack open the banjo bolt under the fuel regulator and manually turned on the fuel pump till gas started to leak out to get most of the air bubble out of the line and seems to help, next im going to order new bango bolt washers to make a good seal. 👍

[@4runnerManco]

That's so pointless to do man it's got INJECTORS and the fuel returns to tank!

[@tismit417]

Dude , I've a 95 4runner, 3.0 EXACT SAME PROBLEM. NO FUEL past injectors. Removed the fuel pressure regulator completely and eyeballed the fuel filling the rail at that point. Checking injectors is next ??? Ohms,? 16, 17. ?? If you had any success, pls. Share . Thx.

[@relaxbecalm5574]

I had a similar issue but it was the ignition excitor and you said you had spark. If the spark is weak it might cause an issue. If you had a fuel pressure gauge see if it is enough to run the SUV.

[@user-qk6sp1ry4c]

ممكن تصور غطاء علبه الفيوزات الداخليه

[@user-qk6sp1ry4c]

Can you please take a picture of the internal fuse box?

[@tismit417]

My 1995 4runner is doing the exact same thing. Including being a money pit. It will turn over , run 2-3 seconds, then , just like you turn the key off , but , not. Good luck to ya. If you have any info to share would be greatly appreciated 😊.

[@user-jf9pd7ng5s]

Cold start injector just because you get fuel doesn’t mean it’s opening

[@lensmanicfeleven1847]

This is for the late comers......shoot some starter fluid into air intake and see if it fires....

[@mrpawpaw7023]

What were the engine check codes? On mine, if the eng temp sensor was bad, it would not start. Engine computer did not know how to adjust the mixture.

[@AmeerKhan-ce9kl]

Am getting code 14 and 22 any idea of to fix

[@KWAHU93]

@@AmeerKhan-ce9klcheck the ignitor module grounds make sure it’s on tight and grounds and wires

[@coop_69]

I just rebuilt mine it started the other day without a radiator or a fan so I put those on and was waiting for nice weather so I could fill the radiator up with water so it wouldn't freeze and now it doesn't start I've redone vacuum hoses and messed with timing and still just cranks it is getting fuel cause the spark plugs are wet after it cranking but I'm stuck

[@elsydro8064]

Does wit get spark

[@tysmith6798]

Buy the book. Will literally save u thousands. Actually, the injectors are governed by voltage which allows the pulse from each injector to remain in rhythm with the crankshaft , omg, Ive been forced to learn things about the thing I cant forget. Did u get it going ??

[@elsydro8064]

Yep it was a bad ground on the back of the motor to firewall

[@jamesmatthew7528]

What ground are you talking about? The one that goes on top of the intake manifold?

[@pedroandres6625]

Did you ever find the problem ?

[@elsydro8064]

Yes I have a second video that explains it, but it was a ground wire

[@cristianvasquez1138]

@@elsydro8064 please tag me on part 2 I'm having same problem

[@jimmymckellip13]

Having the same problem

[@wayneswinson9460]

W

[@MoriKendle]

He’s gotta truck!!! 😐😐😐

[@ericmayernick7804]

Biggest piece of shit motor toyota ever made

[@4runnerManco]

Not true. You just gotta know how to handle and deal with it

[@ericmayernick7804]

@@4runnerManco well just my personal experience I have owned 17 Toyotas in my lifetime and my 4Runner with the 3.0 was not reliable at all only yota motor to let me sit multiple times