Toyota 4Runner Dash Cam Plug & Play Kit Install | 2003 - 2022 Toyota 4Runner

[@michaelquerry5466]

This step by step helped me install the jumper in about 10 mins. Simple and straight forward. Thanks!!

[@TrailGridPro]

Woohoo! So happy to hear! We appreciate you!

[@tom1788]

With help from tech support (thanks Cliff!) I purchased just the power plugs/adapter and used it for a dash cam I already had. My camera uses 12 volts so I snipped the USB adapter PCB and connected my camera's power wires directly to the power plugs/adapter thingie carefully observing correct polarity. The video made the install look simple and it was. My dash cam install looks clean and is barely noticeable. Thanks Trail Grid Pro!

[@TrailGridPro]

Such awesome news, Tom! We’re so glad you’re happy! We appreciate ya!

[@DanielMurphyTurtle]

How much was that adapter?

[@DanielMurphyTurtle]

Nvm 16$

[@sosaherrera123]

Question do we really need to removed the over head console ? I am going to install this soon? But base on your video I did not get the whole purpose of why taking it off I have a sr5 premium. Please help guide me

[@jason20341]

Ordered the Garmin Mini2 bundle from you guys on Monday and just installed it. All of 10mins max on my ‘23 SR5P. Also no need to remove the upper console panel for me. I tucked the dongle into the headliner and used some double sided gorilla tape to hold the USB portion to the black plastic cap. Great video and instructions. Looking to buy more from you guys.

[@vacaville122]

How did you connect the plug without removing the the upper console?

[@jason20341]

@@vacaville122 just popped off the black plastic trim surrounding the power wire for rear view mirror. No need to remove the panel. It doesn’t provide any extra access.

[@jellyfishedx]

I just got one of these kits. I haven't installed it but it's so worth the money. Adapter and 2 different cables. I'm tired of my Cable hanging from my windshield to the cigarette lighter

[@TrailGridPro]

Thanks so much for your kind words! We appreciate you very much!! So glad you find it helpful!

[@Sam-uh2uo]

Awesome tutorial, thanks! Power adapter is worth its weight in gold!

[@TrailGridPro]

Thanks so much for your super kind words! We appreciate you!

[@Jonh741]

Just picked up a plug from you guys. Can’t wait to get it installed!

[@TrailGridPro]

Right on! We appreciate you choosing us for your Toyota needs!

[@Jonh741]

Just installed it and it works! Wasn’t sure if the short cable would come with it but it did. Thanks again!

[@carameyer4407]

Do you have a tutorial for how to install the optional rear cam and how to conceal the power cable for it?

[@TrailGridPro]

I don't think we have a video showing that yet, but you can tuck the wire into the headliner!

[@darengeddes972]

Watched review really wanted the camera looked great so I placed an order accidentally doubled my order called up cliff and he took care of the problem right away looking forward to adding this camera to my rig and remember to my rig and for more reviews thanks Bud

[@TrailGridPro]

Thanks for your order and for your super kind words!! We hope you love it!

[@JD-ml7cg]

Your 4runner has have auto dimming mirrors for it to be "plug and play "

[@TrailGridPro]

Yep, that's correct - or if you have an LCD backup camera in your rear view.

[@willienillie6337]

Thanks for that clarification

[@egeneraltnf]

Just bought your product! Thanks for the video!

[@TrailGridPro]

Thanks a ton! We appreciate ya!

[@hahaitsjeff]

I used double sided tape to stick it to the that panel instead of using zip ties. It's been stuck on there for almost a year. Great install video, it is fairly easy to install.

[@TrailGridPro]

Smart! Yep, that's a great idea!

[@8rest897]

Would this adapter provide constant power when ignition is not on, In order to use the parking mode feature of dash cams?

[@TrailGridPro]

It does not - just when powered on.

[@jquesadar1525]

I installed my 7-pin adapter with my Garmin Dash Mini 2, and it's looking great. Thank you.

[@TrailGridPro]

Right on man! We love to hear it!

[@gicknardner]

Works great, however I am confused why you guys don't just stuff the adapter into the ceiling and put the plastic shroud back on. Mine looks stock with a single cable coming out of the ceiling into the dashcam.

[@TrailGridPro]

This video was strictly educational for the connections - you can definitely tuck the wiring away!

[@MrAirsoft6mm]

From what I can tell, the only reason you need to remove the overhead console is to hide connector right?

[@TrailGridPro]

Yep, correct! I also found it easier to complete the process without the console in the way.

[@justintackitt8529]

Once again, well done sir! Do you happen to know if this connection point would power a dash cam that has a “parking” mode - where it starts recording upon motion sense. Thank you for taking the time to put this tutorial together!

[@TrailGridPro]

Yes, the dash cam will start to record if the vehicle is bumped or moves.

[@floinkydoinky8005]

@@TrailGridPro I'm really curious what gives here, in the video and in your reply to this comment you're saying this adapter provides always-on power, and will enable 24/7 parking mode. However, I just came back inside from doing this install in my '21 SR5 Premium, 10-pin adapter, and guess what? Power is ACC only, like I figured it was, since the auto-dim mirror light isn't on until you've "keyed on" (accessory mode, for keyless models). I went ahead and paid to look at Toyota's wiring diagrams, figuring this wasn't a difference across trim levels, and I'm right - this auto-dim rearview that we're tapping into with this adapter has always been ACC on/Engine on, just like the cigarette lighters in the vehicle. Very disappointed to have purchased this and done this job based on your video and comments only to find I indeed do not have parking mode. Does your Cobra have a battery that gets charged when power is supplied to the camera, and maybe that's why you have parking mode? Not the case for my Garmin.

[@CLARKakaSIX]

Stumbled across this video while looking for something for my BMW 5 series. This type of mirror adapter is exactly what im looking for, does anyone know if anyone makes a similar adapter for BMWs?

[@TrailGridPro]

We're not sure about BMW's, sorry about that!

[@FearIess1221]

Is taking the overhead console off necessary or just the wiring funnel? Also, nice step by step video!

[@TrailGridPro]

This depends on the trim level of your 4Runner. Some trim levels have the plug accessible just behind the mirror, but others require the overhead console to come down in order to access the necessary factory plugs!

[@oad0013]

Just installed it in my SR5P, and I didn't have to remove the overhead console. Just tilted the mirror down, and that was enough clearance for me.

[@tomfranciscosr493]

Can you please post a close up photo of the exact location where you adhered the camera. I like that location but you didn't really show the exact location. Thanks!

[@TrailGridPro]

We have photos on the product page: trailgridpro.com/products/cobra-dash-cam-bundle-03-23-4runner

[@project_poor_runner]

Dang another reason I wish I got the Trail Off-road vs the SR5 😂

[@TrailGridPro]

Ah, yea ... sorry about that!

[@jquesadar1525]

I have the SR5 Premium and the connector is different.

[@himboslice_]

don't a lot of dashcams have compatibility with the rear view mirror power?

[@TrailGridPro]

Yep, they sure do!

[@TacticalTrainer223]

One thing is I like how my current dash cam has a camera facing towards me in case I get accused of not wearing my seatbelt or something I can prove I was doing the right thing. Is it possible to get just the wiring harness but not the camera?

[@AG4runner]

Yes, dongar technologies makes a plug and play for 30$. Out of stock currently

[@TrailGridPro]

Yep, you can get just the adapter here: trailgridpro.com/products/dash-cam-power-adapter-03-22-4runner/

[@TrailGridPro]

You can grab just the adapter here: trailgridpro.com/products/dash-cam-power-adapter-03-22-4runner/

[@JTS-u3l]

When the dash cam powers up, does it start recording automatically to the SD card or do you have to press a Record button to begin recording? I would prefer to not use the app.

[@TrailGridPro]

Yep, it will record automatically!

[@TrailGridPro]

The dash cam will begin recording automatically!

[@JTS-u3l]

@@TrailGridPro Thanks for the clarification! Purchased.

[@xerian16x13]

What if i dont remove the overhead console would it still gonna work? The only purpose of that is to hide the wires right? Ima just take off the cover for the connector then connect the dongar and just zip tie it. I dont mind if it looks messy lol

[@TrailGridPro]

Thank you for commenting! We have had customers leave the wiring out and secure them down! Whatever works best for you!

[@mosherosenberg5535]

Will this work for 2023 Trd off road premium?

[@TrailGridPro]

Yep, it should. Just count the pins from the harness powering your mirror and order here: trailgridpro.com/products/dash-cam-power-adapter-03-22-4runner/

[@sirhcdravas7399]

Hello, just watched the video on KZbin. It was stated that this is for all 4runners from ...I think 2003 to 21. However the web site says with auto dimming mirror or lcd back up camera. I have a 2011 base SR5 with neither. So this is not compatible with mine?

[@TrailGridPro]

Great question! Our kit does require an auto-dimming mirror or a mirror with an LCD rearview display in the mirror. That’s where the dash cam gets power from.

[@sirhcdravas7399]

I figured as much. When it was stated "for all" on the video... I was excited!!!!🥳🥳🥳

[@emreselen6458]

I’m sorry if this is a stupid question but…. Can I just do this without taking apart the top part? Can I just take off the skinny plastic part that go to the mirror so I can just plug in the adapter?

[@TacticalTrainer223]

You can. You’ll just have some excess wire hanging around. Also might be a little harder to get your hands in the gap to do the plugging in & out.

[@TrailGridPro]

You can but as mentioned below, you will be left with visible wiring!

[@nodiggie]

Note: if you have 2017 TRD PRO the harness is different than the one shown in this video. The plug is also directly into the lower back of the mirror where you will attach their harness.

[@TrailGridPro]

You're exactly right - some harnesses plug directly into the back of your rearview mirror!

[@jakebooker3040]

The 2019 TRD PRO is the same, I found the connector on the back of the mirror.

[@johnhanuman1045]

Can it work on a 2022 toyota tacoma trd sports

[@TrailGridPro]

If you have a auto-dimming rearview then yes!

[@willienillie6337]

Is there a subscription fee to use the app.

[@jasonclaice5841]

Looks like I'm a bit late to the party. But great video. Buying the adapter now, but I'm curious what that CB rail and phone mount are! I've been looking at various ways to do mine and am considering to go with a quad lock setup, but I really like my Otterbox cases.

[@TrailGridPro]

Good question! That's the ICS Dash Mount for 4Runners!

[@rostamr4096]

Very helpful..I have already ordered Cobra SC 400D and am going to install it on my 2020 Toyota 4Runner Limited. Can I buy the cable connection from you? Thanks

[@TrailGridPro]

Yes, we have them on our website: trailgridpro.com/products/dash-cam-power-adapter-03-22-4runner/

[@rostamr4096]

@@TrailGridPro Thank you.

[@RedRocketiers]

Is this compatible with a 2023 4runner pro? Thanks

[@TrailGridPro]

Yep, it sure is!

[@jimmpsi]

Would this work in a 2007 Lexus GX 470 by chance?

[@TrailGridPro]

It's possible. You can count the pins on the harness that powers your mirror.

[@jimmpsi]

@@TrailGridPro FYI - it did work! This is for 1st gen Gx470 with auto dimming mirror.

[@RaulAccount-b6y]

Why can't you just hide the usb adapter under the overhead console? Having the usb cord coming down straight to the dash cam would look cleaner. I've seen a few install videos and everyone just zip ties it...

[@TrailGridPro]

We appreciate your comment! We have had a few customers hide the wires in numerous different ways, I'm sure hiding it in the headliner would work!

[@brandonsmith9113]

Does your phone get overwhelmed with storage because of the video data being saved on the app?

[@TrailGridPro]

Nope, that didn't happen to us.

[@ronniebarr3560]

Sort of off topic but is that the Sony 8100 in this 4Runner?

[@TrailGridPro]

Nope, that's the Sony 9500ES!

[@ronniebarr3560]

@@TrailGridPro Do y'all offer that in a bundle yet?

[@TrailGridPro]

@@ronniebarr3560 Coming soon. 😎

[@ronniebarr3560]

@@TrailGridPro Nice! Thank you

[@martynevans3315]

I've been looking for a camera solution for my 2008 4x4 Urban Runner. This just might be it! I would like to see the rear camera option/addition as well though! Before making my decision.

[@TrailGridPro]

Yep, absolutely! We have a photo of the rear camera on the product page: trailgridpro.com/products/cobra-dash-cam-bundle-03-23-4runner/

[@clintonezekiel5935]

Would this install work with a Nexar nexc2?

[@TrailGridPro]

I'm not familiar with that dash cam, but it looks like it has a micro-USB power port for power so it should work!

[@jayantrao8397]

I bought the product and installed my dashcam however it does not provide continuous power supply to the dashcam. So I am not able to turn on the parking surveillance. The video or at least the title is a little misguided

[@TrailGridPro]

You’re exactly right! The product provides power while the vehicle is on. To get constant power you can connect to a constant power wire source or the battery.

[@bsfatboy]

This comment needs to be pinned. This is one of my main concerns. I want to know if my car is broken into or hit while I’m parked at the mall.

[@Bassmith1]

This does not work on 4Runners with the 14 pin connector. My SR5 has auto dimming mirror and LCD screen but it is a 14 pin connector. Take apart your connector and count the pins before ordering.

[@TrailGridPro]

We have a 14-pin connector option

[@JeffreyWilt]

@@TrailGridPro can you link the 14 pin adapter

[@joejr9653]

Nice setup. Anything like this for 2020 tundra pro

[@TrailGridPro]

Absolutely! We’ll have it live on the site in a couple days!

[@UNK226]

My 2017 4Runner's rear view mirror is not powered. False advertisement.

[@TrailGridPro]

Thanks for your comment! Is your mirror auto-dimming? If so, you’ll have a connector that will power your dash cam! Let us know! Thanks again!

[@UNK226]

@@TrailGridPro No. I just said in my other comment that my rear view mirror is not powered. If it's not powered, then IT'S NOT AUTO DIMMING. Your "2003 - 2023 Toyota 4Runners (all trims)." is a false advertisement.

[@TrailGridPro]

@@UNK226 Ah, yep you’re right. We make mistakes sometimes! Great catch. We’re fixing it now. Thanks again for your awesome feedback. We appreciate you very much! Have a wonderful evening!

[@killerut9570]

This doesn't work on a 2019 4Runner Limited Nightshade. The wire funnel is much much smaller than the unit in this video.

[@TrailGridPro]

It works on a 2019. Your rearview plug most likely enters the back of your rearview mirror directly.

[@killerut9570]

@@TrailGridPro So does that mean I'm unable to use the adapter?

[@kylepeterson6965]

Does this also work with the 2024s?

[@TrailGridPro]

Yep! As long as your 2024 is the powered rear view mirror!

[@kylepeterson6965]

Thank you for your content and store! Just made my first drive with it. 10 min install and is very clean.

[@brit6732]

Does this work on a 2024 Toyota 4Runner?

[@TrailGridPro]

Yep! As long as your 2024 has a powered automatic dimming rear view mirror!