Listen up everyone, this guy right here is INCREDIBLE! I just finished replacing this sensor following Tony the Truck Guys tutorial. All of his directions were spot on! My local dealership wanted to charge me almost $900.00 just for this. I spent $200.00 for the sensor and about an hour getting it changed. Big thanks to you Sir!!!
@TonyTheTruckGuy2 жыл бұрын
Ayyyy, glad I could help!
@carluman3 жыл бұрын
Thanks, watched a few videos. This is the only one I found with correct info. Even has links for the parts. I ordered the part and fixed 2003 Camry V6!!!
@4acae86 Жыл бұрын
Awesome! Thanks. I got the same code and needed to know which one was sensor 1 bank 1. The other traction code you are getting is usually fixed by calibrating the sensor. If you disconnected the battery it will need recalibration.
@homer41633 жыл бұрын
Great video Tony. Clear camera work, covered all the details. I have to scan my V6 Camry to see which sensor needs replacing, but I'm sure I can replace it with the help of this video!
@TonyTheTruckGuy3 жыл бұрын
Thank you! Good luck!
@homer41633 жыл бұрын
@@TonyTheTruckGuy Done! It was bank 1 sensor 1, so the exact same one as this vid. Wasn’t frozen on badly at all, especially considering it’s a 15 year old car in the northeast. I bought the slotted socket for this. The hardest part was getting enough leverage on the breaker bar. And pulling off the connector was no picnic either. Thanks for the help!
@TonyTheTruckGuy3 жыл бұрын
@@homer4163 Haha, exactly. Glad it went well!
@kenpeek43803 жыл бұрын
Probably the best verbal instructions associated with any other video I have seen (in contrast with other videos that have only music accompaniment)! Remarkable video too-must be that third arm you were born with!
@TonyTheTruckGuy3 жыл бұрын
😂😂 thanks! I’m glad you found it helpful. Appreciate the positive feedback 😃
@trevorjohnson8736Ай бұрын
Thank you for the video and the parts list, A lil WD-40 made the job easier for me on bank 1 S 1 2003 camry
@TonyTheTruckGuyАй бұрын
@@trevorjohnson8736 Awesome! Glad you got it!
@richieshrug7 күн бұрын
Thank you Tony!
@TonyTheTruckGuy7 күн бұрын
😊
@wiggy8884 Жыл бұрын
Man this may help me soon I think I have to do all four or at least 2 on my 03 Camry xle V6 this was thankful
@ProfessorOzone3 жыл бұрын
Very good and detailed video. Thank you for posting this. I laughed out loud when you said the AC line dripped in your face because that's exactly what happened to me. Unfortunately, I have a 1999 Solara and I can't really get my hands in there like you can.
@brian684675 ай бұрын
Great details tutorial! Tony. Thank you very much.
@TonyTheTruckGuy5 ай бұрын
You’re very welcome!
@miandyeon2 жыл бұрын
damn finally i found rights one!!! thanks god bless you!!
@davestewart91464 жыл бұрын
Great detailed video, thanks 😁👍
@bison57163 жыл бұрын
this helps a lot I just ordered the sensors i need and they should be here on Friday
@TonyTheTruckGuy3 жыл бұрын
Good luck with install!
@brucejohnson9355 Жыл бұрын
Great video thanks
@alexpeen3 жыл бұрын
Very good video ! Got done my codes
@jenervillabad3098 Жыл бұрын
Nice video, what is the corresponding toyota part number for this denso part number? Thanks!🇵🇭
@TonyTheTruckGuy Жыл бұрын
Not sure, but Toyota uses a lot of Denso products from the factory, so this might actually be the OEM sensor.
@andrewhoopengardner28822 жыл бұрын
What symptoms was the driver having? Having similar issues here with my 3.0L 2005 Camry. Low voltage on my bank 1 sensor 2.
@TonyTheTruckGuy2 жыл бұрын
No symptoms other than the engine light illuminated with a code for this sensor.
@andrewhoopengardner28822 жыл бұрын
@@TonyTheTruckGuy thank you for the reply! My acceleration has been slow on the get go.. car is in the shop now, we will see! Great video man! Love the channel.
@TonyTheTruckGuy2 жыл бұрын
@@andrewhoopengardner2882 Thank you! Good luck with repairs!
@automotivetv98613 жыл бұрын
10/10 thanks a bunch for the clear explanation
@TonyTheTruckGuy3 жыл бұрын
Thanks for the positive feedback!
@jpringleman692 жыл бұрын
Awesome video brother
@syedpervez70093 жыл бұрын
Very nice video.thanks for help. God bless you. 🙏
@rm31415932 жыл бұрын
Very nice!
@murder40003 жыл бұрын
Good video!
@syrian-t3848 Жыл бұрын
Is the bank 1 sensor 1 in the same location on a 2.4 L Toyota Camry LE ?
@TonyTheTruckGuy Жыл бұрын
Not sure off the top of my head, but I think this is a 2.4 in this video and he’s doing bank 1 sensor 1 - kzbin.info/www/bejne/aYKrdoSwiNCpq5o
@syrian-t3848 Жыл бұрын
Thanks man, this was a big help
@thomas94692 жыл бұрын
Hey bud I have a question My 2010 camry 62, 000 miles. After filling up tank I noticed the engine light and slip light showed up. I was thinking the gas cap I cleaned it didn’t help my battery was older so I changed it. I went to parts store and I got a code p0137. My question is is it really a sensor issue the dash sign is not there all the time. It came and disappeared after changing battery.
@TonyTheTruckGuy2 жыл бұрын
If there’s no light on currently, I wouldn’t worry. If it comes back with that same fault, it’s likely the sensor.
@thomas94692 жыл бұрын
@@TonyTheTruckGuy Alright cool. Thanks
@gzhang2073 жыл бұрын
Excellent explanation. I have the same symptoms of both upstream AF sensors having constant .66v reading on 1999 Camry V6 without any codes & CEL. Does anybody know why the AF sensors for bank 1 and 2 are different? Are they custom designed matching the these two banks?
@TonyTheTruckGuy3 жыл бұрын
Not sure on your ‘99, but this ‘06 has a different connector for each sensor, so position did matter. I would try to get the exact position you need if possible (bank 1 sensor 1, etc).
@adriansanchez20502 жыл бұрын
Have you ever tried to clear the airbag code? Have the same light on my Camry 2005 V6, and in the center screen says Passenger Airbag Off. The problem started after my car got flooded by a storm.
@TonyTheTruckGuy2 жыл бұрын
This airbag light was on because the car got T-boned and the passenger side curtains deployed. You probably have some corroded wiring or something. Also that light should be on if nobody is in the passenger seat. If someone is in the passenger seat, then it’s not working right.
@johrons3 жыл бұрын
Might be because you hooked that system up. Happened to me but when I took the plug out never saw it again
@chdjhns3 жыл бұрын
I have bank 2 sensor 1 that's turning check engine light on. Isn't that the easy one to get to right under the hood. Also do you know the Denso part# for that sensor? Thanks!
@TonyTheTruckGuy3 жыл бұрын
Assuming you have the same engine as me, the bank 1 sensor 1 SHOULD be the one I pointed at around the 2:20 mark. I do have a bank 1 sensor 1 listed on Amazon in the video description if you want to buy it online but that should at least get you the part number.
@chdjhns3 жыл бұрын
Bank "2" sensor "1" 2006 Camry ole 3.0 V6. Is that the Denso 234-9042 ?
@TonyTheTruckGuy3 жыл бұрын
@@chdjhns It should be, that’s what came up when I searched for it and that’s what I have listed in the video description.
@chdjhns3 жыл бұрын
Thanks
@FRJ19823 жыл бұрын
What is the denco sensor part number??? I need to do this to my 2004 Toyo Camry SE V6
@TonyTheTruckGuy3 жыл бұрын
I have the links listed in the video description 👍
@FRJ19823 жыл бұрын
@@TonyTheTruckGuy so is it the same part number as the b2s1? Trying to figure this out and you are the first video I've seen that talks/shows this sensor's replacement
@TonyTheTruckGuy3 жыл бұрын
@@FRJ1982 I have the B2S1 listed. All 4 positions are listed sctually
@HexedHentai2 жыл бұрын
Please help…I have a 2009 Toyota Camry and my car alarm will go off multiple times at night…..I turn off everything and lock my doors without the key fob and it continues to go off….can I remove the alarm thingy or something??? I’m honestly over this car and it was given to me
@TonyTheTruckGuy2 жыл бұрын
I’m unsure if there’s a way to disable the system. You may have a poor battery connection or bad battery. Or possibly a bad key fob battery
@mgxceo2 жыл бұрын
Is it possible doing it from the top? Even if you have remove a few pieces
@TonyTheTruckGuy2 жыл бұрын
I’m sure it’s possible, just not very fun lol
@mgxceo2 жыл бұрын
Hey do you have a social I can reach you at for a quicker response? I have a few questions as I’m doing the change of the sensor right now
@TonyTheTruckGuy2 жыл бұрын
@@mgxceo I’m pretty good about replying on here so long as I’m not actually busy, otherwise you can email me at TonyTheTruckGuy@Gmail.com
@mgxceo2 жыл бұрын
@@TonyTheTruckGuy ok coo. Question 1. I’m iffy on using only one stand and a jack with tires to support while I’m under there. Do you think I can lift from the side and go under the car from the side instead of going under the front?
@TonyTheTruckGuy2 жыл бұрын
@@mgxceo Yeah, I wouldn’t trust the stand on one side and the jack on the other, so probably better to jack up whichever side you’re working on and just support that side with the stand and make sure to block the wheels with something
@MetalPopka2 жыл бұрын
Why not go in from the engine bay? Unless the V6 Camrys have got the Bank 1 Sensor on the bottom of the car and it is not in the engine bay.
@TonyTheTruckGuy2 жыл бұрын
Yea the location is in a poor spot, it was easier to come from the bottom in this instance.
@MetalPopka2 жыл бұрын
@@TonyTheTruckGuy Yeah. In the 2.4 liter models, the upstream sensor is in the engine bay and it's really easy to access.
@joeb87252 жыл бұрын
I have the same exact vehicle and same exact issue replaced the o2 sensor but did not solve the issue and code reader is still showing p0031 bank 1 sensor 1
@TonyTheTruckGuy2 жыл бұрын
Did you clear the code after replacing the sensor?
@joeb87252 жыл бұрын
@@TonyTheTruckGuy yes
@TonyTheTruckGuy2 жыл бұрын
@@joeb8725 Very strange. And you’re sure the connector for the sensor is plugged in all the way? No bent or corroded pins? Also what brand sensor did you use? I wonder if you got the right one.
@joeb87252 жыл бұрын
@@TonyTheTruckGuy I didn’t do it myself my mechanic did it
@TonyTheTruckGuy2 жыл бұрын
@@joeb8725 Oh I see. Well if you brought it to them for repair and you’re still having the same issue, I’d bring it back to them because they didn’t diagnose it right and verify repairs. Unless you just went in and told them to replace the sensor without doing any diagnostics.
@36kirka2 жыл бұрын
You still check your messages
@36kirka2 жыл бұрын
I'm looking for a video for the replacement of a 02 sensor for a 2005 toyota camry base model bank 1 sensor 2 can you help
@williammize82702 жыл бұрын
Replace the one on the exhaust now it's say the one front of eng 2.4 4cyl here we go again it won't fix mine 04 Camry that was 125 .00 the other one front is another 80 plus their labor
@TonyTheTruckGuy2 жыл бұрын
Make sure the correct one is being replaced. It may be different on the 4 cylinder
@ritarosado46732 жыл бұрын
Help! I need you.
@TonyTheTruckGuy2 жыл бұрын
I can try, what’s up?
@ritarosado46732 жыл бұрын
I don't know who I can trust to fix the problem on my car. Toyota camry 2006 LE CHECK ENGINE LIGHT IS ON. I TOOK IT TO AUTO ZONE. ITS THE bank 1 sensor 1. :( any advice?
@TonyTheTruckGuy2 жыл бұрын
@@ritarosado4673 Well without looking at scan tool data or doing some testing, I can’t say 100%, but I’m guessing your O2 sensor is bad. If you have the same engine as me, you’ll be replacing the exact sensor that I’m replacing in this video.