Toyota Camry Sun Visors Fix

[@ghirse23]

Decided to go and try to get my broken Camry visor replaced today, was quoted $150 at a body shop...No thanks. Came here and found you, God bless you. Thank you sooooo much.

[@GarageBoys]

Listen no joke, when you have a bad visor you hate your car! It’s depressing and annoying. Once you replace you will be angry at yourself for not doing it before.

[@TheKrakatoans]

Had to replace a sun visor after it fell after using it today; I used your walkthrough to replace it. Other videos showed them just muscling it free; yours is the right way - gotta be smart and not make things worse! I know this video is a few years old, but it continues to help people like me - so thank you!

[@GBrown9140010]

Thank you, thank you, thank you!!! I have watched 7 or more videos on this same process----but you are the FIRST person to show that the new cap over the prong assembly should be separated and placed over the connection LAST!!! This is the 2nd time I've replaced one of these sun visors in my car and all this time I thought I was incompetent! The other videos just show men doing what I call "strong arming" the assembly into the slots. Sorry but I guess I'm just a weak gal because it didn't work for me. Then I watched your video and it made complete sense! If you have to remove the cap first before removing the clips with the arm attached, then you have to replace the assembly in the same manner. But since the manufacturer sends all the pieces together you may be fooled into trying to install all the components together in one piece. Anyway, thanks again for your great detailed video!!

[@GarageBoys]

I’m glad I was able to help! 😊 if you can, please like and subscribe

[@GBrown9140010]

@@GarageBoys Done & Done! Thanks again!

[@JesseDavis7373]

Very helpful. I was struggling with snapping on the cover until I watched your video, and it made all the difference!

[@constancewestover9744]

My visor came in today and my husband just watched your video to see how installation is done. Thank you for taking the time to share this!

[@Nbk0224]

Thank you so much. I purchased a replacement visor but was afraid to change it out. Followed your video and I did it. Took me less than 5 min to do. Thank you

[@simonr27]

so usefull..;) mine just broke and this helped me alot. Guess im off to amazon

[@bakerboyboyboy]

Mine is still loose after putting on the cover. Is the cover the key? Does the cover and it's white squares somehow secure the clips?

[@rawmean8989]

Some models have the vanity light wiring attached to a plastic white clip. Are you talking about that?

[@halfover]

very helpful instruction and visor links. Thanks !

[@jillianbetts4306]

Awesome! Thank you so much for the video. I have been being blinded by the sun for a little over 2 years now and haven't figured out how to replace these or where to get them. As I'm short on money though, I may have to get mine from a scrap yard

[@GarageBoys]

Glad I could help! If you can, help me back by liking or subscribing 😃

[@ericmccormac6102]

I did the same thing. ordered the wrong color! good video

[@ichisatori]

flip that cover toward the windshield, i bet it (the clips) comes out of the roof.

[@karthikr1763]

my sun visor is good but it is drooping. I put plasters. Do i need to buy new visor or only clips are enough?

[@bryanmitchell5728]

I want to know why a brand new 2018 has sun visors that won’t stay in the up position. Our last Camry was the same GD way.

[@libertybellbill4439]

How Much Did They Charge For The New Toyota Visor ?

[@GarageBoys]

Check the link the in description.

[@libertybellbill4439]

@@GarageBoys I Got A Toyota Replacement Visor From Amazon And Fixed It Myself &26.80 Including Tax! It’s Working Great 👍🏻 Now

[@geralynpalacol9295]

Wow, THANK YOU, THANK YOU, THANK YOU!!!🙏🙏🙏😍. Appreciate it sooooo much!!!😂😍

[@GarageBoys]

Glad I could help! It sure makes a big difference you when put new visors.

[@gregorywerner289]

Got a nice cheap replacement. The attachment cover came on when I received the visor, and it was a pain to get off. We eventually did. Then we put the clips through the ceiling and they do catch, but how does the attachment cover go on that easy? There does not really seem to be an angle for that attachment cover to fit in and if I could just get the attachment cover back on then I would be done with the fix. Any tricks to get the attachment cover back on?

[@JesseDavis7373]

If you do it exactly like he does, it works like magic! I felt your pain until I tried it with same angles of this video

[@z3m0s]

Yo, I bought a replacement visor but the clips aren't attached to the rest of the mechanism so it won't actually clip into the hole. Any idea what they're called specifically so I could get my hands on two of them?

[@ichisatori]

i bought one, too. but the clips won’t hold it securely in the roof!!! (same clips as original clips, but new)

[@pattinsay8777]

How to remove the white thingy? Should I use the screw? And should I push them both at the same time? Thank you!

[@jimmylopez5209]

Ty bro

[@waltborys7870]

$29 aftermarket replacement visor from Amazon. 5 minute job. My time was worth the $$$

[@GarageBoys]

Oh yeah, I really hate when the visor is broken and hanging down. Glad you could fix it

[@jessedba5886]

Thank you!!

[@GarageBoys]

Glad I could help

[@lydiahegge]

I have the same problem with my 2010 corolla on the drivers side. Everything seems to be intact except it won't stay up, it just hangs there. It comes off the post easily too. Do I buy a new visor or do I buy the plastic piece that is attached to the roof of the car? Thanks!

[@mikehorvath8176]

Easy peasy....thanks!!

[@tedrogers4643]

i replaced mine, too. however, i tried 3 of them. you cannot flip or even more these replacements without them coming right out of the roof. the cheap clips, even just like original, will not hold unless you don’t move it. but, since these clips are the same as the original visor, I think the problem is is that all of the ones I bought and I bought and sent back three of them before I kept the fourth one which was just like the other three - the problem is they’re so stiff that they rip it right out of the roof. please show you flipping yours toward the windshield a few times.

[@thomaszlotnicki6896]

I have this same problem. The visor stays up, which was the main issue, however these clips appear to be too weak/loose to move it down and to the side. Limited functionality, in other words. If there were a few screws instead of the clips, this wouldn't be an issue

[@camdemobile]

@@thomaszlotnicki6896 hi. i am the same guy you replied to: the solution: the outer upholstery plastic cover! that you “see” once it is installed. you must push that outer cover up into the clips!!! THAT is what holds it up in the roof snuggly. (the stiffness aspect is actually normal, to keep your preferred positioning when using. so forget the stiffness! PUSH that outer plastic cover piece up hard into the clips. So, put the whole thing in the roof, then PUSH that outer piece up hard into it. whether it expands the clips or not i don’t know. but that is how it all works. I paid a dealer tech about $57. for that info and installation. i made him take it out and do it again to prove what he said. he said not to take it completely off, let it hang below as it will; but i do not think that matters. UNBELIEVABLE. and all fixed.

[@tedrogers4643]

@@thomaszlotnicki6896 did you see my response?

[@MEHB65]

Thank you!

[@GarageBoys]

Glad I could help! If you can, help the channel grow by liking and subscribing 😃

[@tuloulava4168]

Appreciate it, thank you

[@mrv911]

Thanks....I have a Camry 07 and the passenger side visor is loose. Now, I know what to do. I'll order a visor through Amazon instead of going to the dealership.

[@GarageBoys]

Glad I was able to help! If you can, help me back by liking and subscribing 😃

[@sherrywise2825]

do u know if clip comes off do I need another one?

[@rachelperrault4901]

I was just told $300.00 at my dealership! Thought about velcro or duct tape. Saw this. Wont be able to do it myself, but will go on a manhunt next😂.

[@GarageBoys]

😂 😂 😂

[@julithornton2346]

Yea- I was told $350 "because the whole ceiling would have to be replaced" 😑 Thanks bunches Garage Boys!!

[@sherrywise2825]

what if clip comes off

[@phanalai]

I was able to replace the driver visor with no problem. I ordered the replacement for the passenger side and thought it would as simple to replace and it was not. I could not get the clips to catch. What am I doing wrong on the passenger side? I tried hammering it. I lost 2 clips in the ceiling. Please help. Thank you.

[@gnuzzle]

i am having the same problem, only with the driver side. The clips don't stay attached to the visor

[@phanalai]

Blaise Wagner will you please let me know if you find a solution?

[@guitarmagik3204]

You want to put the visor in first without the cover, then before moving anything put the cover back on and push it up. The cover helps the clips stay firm. I believe he removes the cover first to make it easier to put the visor with clips in, then slide the cover on and pop it in. It should hold.

[@eddiedav6162]

Where you get for 32 dollars

[@GarageBoys]

Back in the day it was cheaper, now everything went up in price

[@GarageBoys]

You can buy the Beige visor here: amzn.to/3PfPqTE and the Gray visor here: amzn.to/3WtpRRG

[@mikeweber2838]

I made the same color mistake. No one noticed.

[@tedrogers4643]

it turns out, the cover for it is what holds it tight to to roof. apparently, the cover expands the clips… idk. the replacement visor (i tried 3) were so STIFF that moving the visor ripped it right out of the roof. i could not figure out WHAT IS THE SECRET, or are they all defective. went to the dealer today. boom, snug and tight - yes visor was very stiff. i thought for sure they could not do it. mechanic told me even he had ask chief mechanic. so, if you tun into that bit of trouble, the secret is the outer cover, THAT cover is what holds it in the roof securely, so you can actually use the visor. cost me $57. to find that out.

[@chienthan12345]

It is a replacement video. It is not a fix.

[@GarageBoys]

The only way to fix the broken part is to replace it

[@timblanchard7126]

@@GarageBoys Sorry, I agree, it's not a fix, it's a replacement. I'm looking for a fix. My friend's visor hangs down a bit, won't stay in upper position. I thought maybe squeezing the pivot clip on the arm might help, but have not tried it.

[@johntran7021]

This guy is so rich to go and buy a new sun visor and replaced it.🤣🤣 It not worth this thing can be fix with tape or clue super

[@jokestersaiyan8235]

This isnt a fix it video. This is a replacement video.

[@GarageBoys]

It’s the only way to fix that issue

[@ontimeconstructions7035]

Mate I have no idea what you are saying, audio quality is pretty bad ...... speak slower and more clear pls, we are not all Americans online you know

[@GarageBoys]

Sorry bruh, next video I will try to add more text and speak slower 😃

[@aprilf6443]

@@GarageBoys well i thought it was perfect speaking. I could understand every single thing he said. I am from Canada. Don't sweat it sir :)

[@aprilf6443]

He was speaking clear and the audio quality is fine maybe you need a better device? Also you can change the speed to slower on youtube so use that ... MATE

[@finin4025]

Thank u