Toyota Crown JZS171 Manual swap | Pedals and handbrake conversion Pt.1

[@adrianenglish511]

Great video bro!!! These have been around awhile but they starting to get more popular especially in Australia now.

[@GeorgeHampl]

Absolutely. With the prices of JZX people started to look elsewhere

[@WorkinClassCanadian]

Thanks for the info. I will be going R154 this summer

[@GeorgeHampl]

No problem. Any questions ask

[@leongreen6942]

Love the content am in the process of manual converting my aristo and I do believe I have to do the same thing you're doing right now

[@GeorgeHampl]

Hey Dude, I can imagine its pretty similar. What pedals are you using?

[@leongreen6942]

@@GeorgeHampl due to the high demand for jzx100 parts and supra parts I had to get creative using a clutch pedal out of a Corolla 2000 Corolla if I'm not mistaken they are plentiful here in Canada and very cheap. As for the brake pedal I was thinking of keeping the stock one just cut it down or I might replace it with a manual brake pedal from a Corolla or something

[@NZcarBlog]

Good work!! Love this channel

[@GeorgeHampl]

Thank you

[@brian9899]

What have you held those twos pin in for the handbrake lever with on the other side? Just a plate and a nut?

[@kinglet1919]

Yoo how did you shorten the cable like what did you replace the little knub with

[@GeorgeHampl]

you dont want to know :D

[@mr.cangieter8758]

Love me a JZS171 crown. Good content.

[@stevenbolton5967]

What box you gonna run? Keep up the videos as I've a lot to do with my crown and need some help 😂👀

[@GeorgeHampl]

J160. No problems. Anything I haven't covered just DM

[@juggsnotthuggs8623]

Some good content there! Shame about the handbrake not being ideal, I did go & look at a is200 breaking but as you know totally different location unfortunately 👎 I here the JZX100 one is pretty much straight forward just drill tunnel & bolts/plate otherside. Shame it works out pricey by the time it’s in the UK. Did you look into using a soarer or supra handbrake mech? I was half thinking maybe even Hilux 🤔

[@GeorgeHampl]

Yeah, the IS200 is completely wrong. Different mounting and it's on the other side of the tunnel. The handbrake lever I use disnfrom mark 3!supra and would work fine. It's the cable that's the problem. The IS200 just too short so it sits too far back.

[@juggsnotthuggs8623]

@@GeorgeHampl ah sorry my bad so it is MK3 supra, you thinking swapping your cable out with with the mk3 supra ones or did the is200 do the job in the end with a little grinder massage 😀 Fair play if it works it works bud

[@GeorgeHampl]

@@juggsnotthuggs8623 The rear section of the cable doesnt have the same type end as the IS/JZS. I am sure there is a cable that would fit just dont know which one.

[@kowftw1006]

Is this the same as the JZS151? Ive been looking to buy coils for a JZS151 but im not sure if the JZS 171 coils would work do you know if its the same?

[@GeorgeHampl]

It would be more like the JZX100. JZS171 is more like the JZX110. I have converted my JZX100 using the J160 gearbox and there is video on my channel.

[@kowftw1006]

@@GeorgeHampl do if I would want to buy a part for a JZS151 a JSX100 part would work?

[@GeorgeHampl]

I believe that's correct as they share chassis but I am sure there will be some differences. There are couple of good Crown AUS groups on FB. Worth asking there.

[@jacobwalsh5884]

hey bro i own a crown and want to know roughly how much all the parts were as im looking at manual swapping mine

[@GeorgeHampl]

In todays market probably 2k

[@jacobwalsh5884]

To easy thankyou bro

[@mr.cangieter8758]

🚗💨💥 Great content.

[@nik557]

Any chance this can completely disconnect vsc or the traction control?

[@GeorgeHampl]

Not with the emulator

[@imDAbestTankinRs]

How much power did this conversion handle?

[@GeorgeHampl]

I would say depending on what for :D 450nm

[@02lucy666]

I was wondering, wouldnt a remote r154 (in case you are swapping over to an r154) work better with a shortshifter to fit in the AT shifter-hole? to have a better OEM looking finish

[@GeorgeHampl]

I am swapping for the J160. WIth an adaptor. If the opening is the same as the xe10 or JZX110 the distance is spot on.

[@02lucy666]

@@GeorgeHampl ahh sweet! good to know! not too sure about the Handbrake location, i probably would have mounted it at an angle, it looks like its hard to reach, once the seat is back in

[@GeorgeHampl]

@@02lucy666 You are right. Its just the cable is so short. I will see what its like when the seat is in.

[@shizukesajdm]

Hey man! How much horsepower do you think an J160 can take? Cool vids!

[@GeorgeHampl]

Thank you. Lot more than internet experts say. Irish run some mad power on these. With good oil and sprung clutch 400.

[@shizukesajdm]

@@GeorgeHampl Ah nice! Unfortunately not enough for my plans, so R154 it is! 😅

[@GeorgeHampl]

@@shizukesajdm Or the ZF

[@GeorgeHampl]

@@shizukesajdm And to be honest at 600 what you mention in your video its just about for the R154

[@shizukesajdm]

@@GeorgeHampl maybe 600hp will be more realistic than 600whp then.

[@savagebm6839]

This has inspired me to do the same thing

[@GeorgeHampl]

Awesome man. Any questions fire DM on Instagram.

[@savagebm6839]

@@GeorgeHampl i appreciate that man