First time a came across your channel and exactly what I was looking for, informative and easy to follow instructions, definitely earned a like and subscribe from me 👌
@kisbushcraftdownunder3 ай бұрын
I am glad my content was helpful for you I try and make good content that is useful
@79series2 ай бұрын
Hi mate, on the instructions the pillar bracket shows inserting plastic clips, then screws, but it looks like you used pop rivets, were they supplied with the kit, did you need an pneumatic pop rivet gun, a work shop wants to charge $600 labour which id like to save. Thanks.
@kisbushcraftdownunder2 ай бұрын
I had a rewatch the video I drilled the pillar holes to 8mm so I used plastic clips that came with the kit regards Mike
@79series2 ай бұрын
@@kisbushcraftdownunder Hi Mike, and did you use pop rivets or screws to hold the bracket?
@kisbushcraftdownunder2 ай бұрын
@@79series with a 8 mm hole it must be screws but its a long time ago now
@79series2 ай бұрын
Perfect thanks mate.@@kisbushcraftdownunder
@stevendouglas65934 жыл бұрын
Really appreciate your videos. Loved the dual battery installation and the rock sliders as well. Practical and easy to follow. A great help.
@kisbushcraftdownunder4 жыл бұрын
Thank you for the positive feedback I try and make content that is useful and easy to do yourself regards mike
@omerh63202 жыл бұрын
hello, do you encounter a problem such as wetting the air filter, does water go to the air box in heavy rain?
@kisbushcraftdownunder2 жыл бұрын
I have never had a problem with the filter getting wet the head of the snorkel removes some of the rain water and in the bottom of the air box are two drains one a small hole and the other a duck bill valve .Some people seal them up worried that water could get in during river crossing regards mike
@louisegan99 Жыл бұрын
Running a holes backwards will overheat and stuff it. When drilling with both the holesaw and the step drill, run it up to speed before contacting the cutting surface to avoid it grabbing, pulsing the drill like that will overheat the motor and cause it to grab. Other than that thanks for letting me having a visual of the process beyond the instructions. Oh and don't use tin snips, they deform the panel
@kisbushcraftdownunder Жыл бұрын
I need a more powerful drill but I don't often cut big holes in new cars with the snips they were new and I took small bites so they didn't mess the car side edge of the cut hope the video helps with all the small details regards Mike
@djchriskola10 ай бұрын
@@kisbushcraftdownunder it was painful watching you drill and cut,,,, read up on proper technique...
@onthefly47113 жыл бұрын
Do you know how far the snorkel reaches above the roof? I have a demountable cabin with alcove and I´m wondering if the snorkel fits under it- Thank you for the great video!
@kisbushcraftdownunder3 жыл бұрын
Its hard to measure due to the curve in the roof so I measured from the top of the wing mirror its 37cm or 14 1/2 inches to the top of the ram head the snorkel sits forward's of the windshield by 28cm or 11 inches hope that helps
@onthefly47113 жыл бұрын
@@kisbushcraftdownunder That was as perfect answer, thank you so much!!!! (My alcove ends only a few cm in front of the top edge of the windshield. So the snorkel is far away from it in the horizontal direction, I didn´t think of that I only considered the potential vertical distance) :) Greetings to the other end of the world!
@stevew28423 жыл бұрын
Thanks, got to do my 2021 next few days, now more nerves!!!
@kisbushcraftdownunder3 жыл бұрын
its a bit nerve racking cutting a big hole in a good car measure twice remember you can cut a bit more off but its hard to put metal back on good luck regards mike
@speedwayvic66803 жыл бұрын
Great video helped alot, thanks! took bang on 3hrs for me
@kisbushcraftdownunder3 жыл бұрын
It took me a lot longer than that with the filming and working out all the clips, glad it was a help regards Mike
@MC-jf6ic Жыл бұрын
Any difference in performance?
@kisbushcraftdownunder Жыл бұрын
I haven’t noticed any change but I not a hard driver no loss of fuel ⛽️ economy only downside is probably changing the air filter more often due to bugs
@MC-jf6ic Жыл бұрын
That’s great to know, what’s your average fuel consumption?
@kisbushcraftdownunder Жыл бұрын
@@MC-jf6ic about 10.9 km per litre with HWY tyres on but if I put my off-road tyres on BFG KO2 I loose about 10%
@maverick_nz4 жыл бұрын
Did you get engine light on after installing?
@kisbushcraftdownunder4 жыл бұрын
No I had no light engine come on did you turn the ignition on when the MAS sensor was disconnected?
@maverick_nz4 жыл бұрын
@@kisbushcraftdownunder all sorted mate haha
@lukenakachi65023 жыл бұрын
Why didn't you get a custom air box
@kisbushcraftdownunder3 жыл бұрын
I have no intention to modify the engine the Hilux air box works fine most custom boxes are about performance and don’t have a air spinner so wet filter do happen when driving through rain. For me reliability is paramount
@maverick_nz4 жыл бұрын
Nice mate just the vid I needed to install mine haha
@kisbushcraftdownunder4 жыл бұрын
glad it helps
@landau3933 жыл бұрын
Thanks mate nice video I have the ArMax to do... wish me luck lol 🤦
@kisbushcraftdownunder3 жыл бұрын
I think you have to cut the inner guard as well as modifications to the air box good luck
@landau3933 жыл бұрын
@@kisbushcraftdownunder yes I do and thanks your video has helped
@vctrmmnl48244 жыл бұрын
Great job! The horror of drilling and cutting in the body of your car... aaargh
@kisbushcraftdownunder4 жыл бұрын
yes cutting a big hole in a good car can cause a bit of anxiety always measure twice before you start cutting