No problem, I got tired of watching people complain about the complicity of this when in reality it's pretty easy
@NobleNobbler2 жыл бұрын
Don't worry man, they only work about 20% of the time in the US but no one here knows how anything works anymore and they buy a new car
@renevanderjagt3289 Жыл бұрын
What if they ere well greased would that not help the life of the adjuster so it wouldn't seize
@saebbi Жыл бұрын
yes but not too much, grease attracts dirt/dust, but yes definately not have it bone dry
@GoAndStay2 жыл бұрын
If my brakes do not self adjust via handbrake (during normal operation) and I work on my vehicle myself and know it is NOT rusted solid, how can I fix it?
@saebbi2 жыл бұрын
If its not seized, then its something mis aligned
@hokz728311 ай бұрын
Hi have the same set up in my car prado LJ95 1998 model with a 3L engine. My rear right brakes keep sticking up after readjusting. I have adjusted probably 3 times in the past 3 months. The brake cylinders are free with no leaks. After adjustment it slowly starts to tighten. Could this be the reason? Self tightening everytime i pull handbrakes? Can this be by-passed?
@saebbi11 ай бұрын
maybe your drum or shoes is too far worn? thus over tightening to compensate and becoming jammed
@hokz728311 ай бұрын
@@saebbi my shoes are new but it is the same drum from 1998 😊. I was thinking of removing the hand brake connection to this drum. For a while for parking on the slopes i was slotting it into four low as my hand brake. But we forget and without thinking pull the hand brakes. I knew it was something to do with hand brakes but what exactly i couldn't figure out until i saw your video👍. I will slightly twist that adjuster and see.
@dubstatic7 ай бұрын
I also have this problem with my hilux mk5 - keeps over adjusting and i have to manually loosen
@christianclarke98724 жыл бұрын
How do you loosen it back off my one won’t turn back?
@saebbi4 жыл бұрын
theres an access port in the back, push away the lock mechanism and turn the spur while holding away