Toyota Oil Change, Toyota Oil Canister Tutorial

[@5MinuteFixit]

If you need to pick up anything used in the video its listed here: Toyota Filter Canister Wrench: amzn.to/3H28his Toyota Metal filter housing: amzn.to/41wT8xK Toyota Funnel: amzn.to/3H7bzB3 Toyota Funnel (Less expensive option): amzn.to/43ZlClw Car Ramps: amzn.to/2nSNjgw *Amazon Affiliate Links*

[@farisal-salihi3780]

Thank you for the excellent and concise video. No BS and no wasted time. I wish all how-to video channels watch and learn from you. Thank you again. 🤗

[@5MinuteFixit]

Thank you for the compliment on my video style and for watching, I appreciate it!

[@dirtyleeds5748]

Best video I have seen for. the correct position of the small o ring and this is at least the 10th video I've watched brilliant and simple.

[@andrewm.4168]

Finally someone uses the included nozzle to drain the filter before cracking it open and making a mess...

[@Mr.mike..125]

Very good video sir thank you. You got straight to the point and we are thankful ✅💯🇺🇸

[@5MinuteFixit]

Thank you for watching, I’m glad it was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank you!

[@dudeflynn2781]

Did this a couple years ago, it’s the way to go

[@5MinuteFixit]

Thank you for watching!

[@debk5325]

Thank you!

[@5MinuteFixit]

Thank you for watching, I’m glad it was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank you!

[@sergeybond808]

Thank you very much. You say and video very good. Evrithing andesten now

[@robcarter42]

Great video! what is the drain plug spec and the oil filter spec so I do not over tighten them. Do you have to use a torque wrench to make sure you do not over tighten them?

[@njsongwriter]

Drain plug = 30 ft.lbs Oil filter cap = 18 ft.lbs. Oil filter cap drainbolt = 10 ft.lbs. If you don't use a torque wrench how will you know yo got it right?

[@Mr.mike..125]

Please do a video on limp mode. Over night crank the truck vsc light comes on truck goes in to limp mode. So I pull the neg cable off wait then put back on no light and truck drives great all day. Park it wake up start it after Abt 2 minutes the vsc comes on and goes in limp mode🤷

[@ISAAACVLOGS]

What can I do if it’s super stuck can’t even move and I already drained my oil :/

[@sergeybond808]

Thancs

[@5MinuteFixit]

Thank you for watching, I’m glad it was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank You!

[@singalls]

Shouldn't you also replace the drain plug crush washer?

[@5MinuteFixit]

You could but in my opinion it that isn't really needed unless it was overtightened in the past. I've never had a drain plug leak on my Toyota's and I rarely have replaced the crush washers. Thank you for watching!

[@njsongwriter]

Is there a reason why you are using high mileage oil? Does your engine consume oil?

[@5MinuteFixit]

No real reason I have roughly 105k on the engine and it doesn’t consume oil at all at this point. Thank you for watching!

[@uknownunknown9051]

Working on mine now and snapped the cap off dealer put it way to tight

[@5MinuteFixit]

Were you doing the metal housing swap or just the oil change?

[@robertslegers257]

Good video. I think that end cap drain is a waste. It is like some sort of Japanese tea ceremony. Just one more possible leak.

[@5MinuteFixit]

I tend to agree with you, sometimes I will just drop the whole filter canister and let it drain that way. Thank you for watching!

[@njsongwriter]

I always drain the oil filter cap. I don't always change the oil filter though. I use a synthetic oil filter rated for 20,000 miles and I generally change it every 10,000 miles. I change the oil every 5,000 miles.

[@robertorojasjr6572]

You should never drain the oil until you loosen the oil filter to make sure you will not have any issues.