WARNING - Great video BUT remember to release handbrake BEFORE removing rotors. Followed video without pre-watching and they did not release handbrake until they noticed it was still on. This caused a can of worms for me with the handbrake becoming seized in the rotor and hours of work getting it off. I suggest you edit the video so you let viewers know of this error incase, like me, they dont watch it through first before attempting.
@gisellebarber72942 жыл бұрын
Great video. Thanks for sharing your knowledge with us.
@kilanorman-bogana709910 ай бұрын
Use an old pad to retract the piston back so you don't damage it.
@silashobson-kl6qm Жыл бұрын
I appreciate your video brother thank you 🙏
@SalmonCOD69 Жыл бұрын
It appears your drums were fouling as the rotor didn’t come straight off. How did you free it up? It appears it had been edited out.
@jeremyb8493 Жыл бұрын
Seized handbrake cables?
@SalmonCOD69 Жыл бұрын
@@jeremyb8493 they forgot to add in that the brake tension requires backing right off to be free of the drum. I learnt this the hard way. There is a slotted hole with that appears to be a cog looking wheel in the hole. This is the adjuster. Flick it which ever way loosens the shoe. This is also the adjustment to be made to tension the handbrake. I found all this out the hard way.
@jeremyb8493 Жыл бұрын
@@SalmonCOD69 thanks, yeah me too, just tore the whole lot out and will hand it to my mechanic for now… right pain in the behind!
@SalmonCOD69 Жыл бұрын
@@jeremyb8493 haha. Yeah shot house hey. This video just annoyed me cause they have edited that part out.
@-boska Жыл бұрын
@@SalmonCOD69wish I saw these comments. Think I’ve just stuffed mine up now 🤬 what a shit video for missing that
@scottcannon2674 Жыл бұрын
Thanks. Looks really easy.
@joelw89126 ай бұрын
Wish I read comments first .. this video is a proper stitch up .. 🤦♂️
@andyflans99667 ай бұрын
Important: Detention of the handbrake will likely be necessary.
@PhilipHarrington Жыл бұрын
Nice work thanks.
@kenlawton1531 Жыл бұрын
How's the brake dust with the DBA extreme pads?
@GrahamSmyth-um6uh Жыл бұрын
Very little that's why they are the best
@damiensutton10573 ай бұрын
Hey hey you skipped a bit because I had trouble brake pads getting caught on rotor
@joelw89126 ай бұрын
What did you do at 4:44 when vid stopped I’m stuck there, rotor is loose but won’t come off
@Alex-ip6nd Жыл бұрын
Does anyone know where the cruise control fuse is located? Prado 150, year 2014, engine 2.7.
@adamstrother4377Ай бұрын
Read the comments first. They cut out the most important part. Adjusting the handbrake adjuster. You can see when he can’t get it off. He obviously made the mistake, should have left it in to show people what happened. Dick move
@Mike-ry4ti Жыл бұрын
Toytota wanted $1600 for new pads and rotors... bloody rip off, I can buy all the tools needed, after market parts and still save cash!
@josephiturra587 Жыл бұрын
Oh what a rip off …….
@callanmurphy98078 ай бұрын
A single rim from Toyota is $1650 too lol
@ariarfiandi2 жыл бұрын
Do you have to bleed after the installation ?
@Bob_buoi2 жыл бұрын
No bleeding needed as we pressed the brakes piston back with the brakes reservoir lid opened.
@adamconnolly74782 жыл бұрын
USE TECHSTREAM to bleed, its easy!@
@rodbender794611 ай бұрын
I followed this video and stuffed the shoe retainer clips. You don't know how to do this job properly and your misguided steps end in disaster. Take the video down. Learn from Forby diesel, not this guy
@mtmjoziadventure14099 ай бұрын
I second to this. He should mention that he needs to loosen the handbrake by adjusting through that small hole on the rotors before removing the rotors, otherwise you will stuffed up the clips. I recommend he needs to edit the video and add subtitles to remmind the viewers before they stuffed up their brake clips. Cheers kabayan.😊
@callanmurphy98078 ай бұрын
Have you boys got a link for it? I've got the same project on a kdj150