I replace the knock sensors and wiring in a 2008 Toyota Sienna. This is response to a P0333 trouble code. Here's the gasket set I used: amzn.to/47k7ZPa
Пікірлер: 25
@gregalfrey360611 ай бұрын
I have been dreading this repair but a few things of my research. 1. Replace the back spark plugs and coil packs with denso brand while you do this, these have a life of 150-200k so if never been done, do it now. 2. Clean the throttle body while apart. 3. Replace the heater hose by the knock sensors and clamps, due to a possible future coolant leak.
@RobsFixitShop11 ай бұрын
Good advice!
@gregalfrey360611 ай бұрын
@@RobsFixitShop Thanks for the video i plan to do this in the next day or so! It will certainly help guide me!
@andrewtisdale36428 ай бұрын
Water hose
@phackqu2 ай бұрын
Yessir. Anything else by any chance?
@brianle89048 ай бұрын
thanks for your guidance. Greatly appreciated.
@dominicm217510 ай бұрын
Well that explains why I got such a great dividend check last quarter from my Stock in Band-Aid !! …… All joking aside, we have the same year Sienna with 280k miles and have got a PO 333 a few times now so I know this project is in my future…Thanx so much for posting this !
@RobsFixitShop10 ай бұрын
My wife and kids are always rolling their eyes at me for coming into the house with blood on my arms and not being sure how it happened. I just get into what I am doing!
@stevetran82314 ай бұрын
Thank you for the instruction
@fivestar25413 ай бұрын
Thank you mr robs i see how pix knock sensor toyota sienna it happens to mine same thing 🎉❤
@SD-co9xe3 ай бұрын
My husband is going to do this project over next weekend on our 2006 Toyota Sienna. Thank you for the video and details!
@RobsFixitShop3 ай бұрын
Get some band aids!
@SD-co9xe2 ай бұрын
@@RobsFixitShop He survived it and our car passed inspection!
@RobsFixitShop2 ай бұрын
@@SD-co9xe Great! I am glad I could help!
@68M35A211 ай бұрын
I have to do this on our van, and it only has 120K on it. Damn. I am not looking forward to it for sure. Great Video!
@RobsFixitShop11 ай бұрын
Good luck! I hope you don't drop your socket down the back of the engine as many times as me!
@peaceineachsmile387111 ай бұрын
how many knock sensors did you replace? Should i replace both i don’t have to get to it again? I got the same code too. Thank you for sharing!
@RobsFixitShop11 ай бұрын
I replaced them both and the wiring harness although I would have only needed to replace one. Good luck!
@daviddevillers679011 ай бұрын
Lots of work! Good job! How many hours total?
@RobsFixitShop11 ай бұрын
Sadly, it took around 4 hours and I was stiff as a board the next day from all the reaching back to get that stupid bolt off!
@deeefff57765 ай бұрын
@@RobsFixitShop It only took me about 3 hours, and that was because of this video, thanks!
@user-it6vi5ey9u11 ай бұрын
Can you provide a list or at least description of all the new gaskets you replaced. Would be much appreciated!
@RobsFixitShop11 ай бұрын
I used a Fel-Pro intake manifold gasket set. Also, the rubber rings around the injectors seemed kind of hard and loose. I ordered what I thought was a replacement set but ended up being wrong so I just went with the old. I put the link to the gasket set in the video description.