Toyota Tacoma Oversized Tire Fitment Kit Install

[@Sirderptron]

ive had my tacoma for almost 3 years never did any aftermarket modifications yet but after watching tacoma beast my mind has been blown by what you can do to the 3rd gens looking forward to the journey ahead and this is a dope video keep it up!!

[@tacomabeast]

Glad we were able to inspire you! If you ever need any help through your journey feel free to dm us on Instagram or Facebook and we’ll be happy to help

[@mrg7272]

This shows me that, yeah, I’m not ever going to do this. This is why a professional is paid to do this type of work.

[@hulkcarranza8583]

Man I would hate to have this done on my vehicle , Toyota cmon do some R&D on the Tacoma so that is customer don’t need to do these crazy mods, look at theWrangler , you can put any size tires

[@ohhailkingbobby1073]

Those are some nice welds!!! I'm considering upgrading to 35s when my 33s run out of thread

[@tiffanynguyen412]

I absolutely love this C4 OTF kit I just had it installed on my 21 Tacoma.

[@MarcelloCantu]

How much did you pay for install? IM thinking of ordering this

[@CameronM308]

@@MarcelloCantuwondering the same thing

[@olympiawa]

This is something I want to do to my Tacoma one day. I've wanted to put a lift and bigger tires on it since before I picked it up. I don't trust people though and I'd worry that someone would do a half ass job on the body mount. This is the type of professional job I'd like to have done on my truck; attention to detail and quality craftsmanship. I'd turn my Tacoma over to this guy any day.

[@eliasbeas3556]

I trimmed away so many times at my factory fender well liners that I eventually needed to replace them so I used this kit. I dont have 35s or larger, I have 295/75r16 but was still able to install this kit in my fender wells without trimming my flares. I also slightly modified the long pieces of hard foam that you need to take out and reused them. After a couple coats of primer and couple coats of black truck bed liner these bad boys went on and are solid. Only con is that I received them almost 2 months after ordering. I ordered off tacoma liffestyle.

[@ryangoldtooth7755]

This will be my next upgrade. Can’t wait to do this myself.

[@MoY206]

This is the mod I've been waiting for. Thanks Tacoma Beast for showcasing this and C4 for this awesome engineered product. But yeah imma sit this one out and hire a pro to do this lol.

[@tacomabeast]

Glad you like it!

[@landoncarling493]

C4 is top notch man! 💪 Good work guys

[@lucasbosier6808]

Y’all remember the jeep killer video? These tires remind me sooooo much of that Tacoma, especially since they’re both white.

[@brandonrupe5675]

What kind of cutoff wheel did you use to cut the fenders? And what kind of wheel did you use yo clean it up?

[@WinterWolf_92]

🆘️ Will they be making these for 2nd gen tacomas??

[@johnb-ke9xi]

need this for 5th gen 4runners too Mateo! can't imagine they'd need to be much different in terms of the kit...

[@tacomabeast]

We might actually be able to place a custom order for you! Shoot us an email at [e-mail] and we’ll see if we can do this for you 🤙

[@Marine2111usmc]

I’d be interested too. I hope they make a kit like this. I have a 5th gen Trd or premium 4Runner and a 19 Trd or Mt Tacoma.

[@ericschmidt3759]

Are they going to make them for the 2nd Gen Taco as well?

[@AFGixxeR88]

Any concerns with structural integrity or safety

[@tacomabeast]

Nope 🤷‍♂️

[@jasongaudreau2075]

So with this beautiful kit, AND an RCLT hd kit…I’m believing 37’s could become the “norm” on Tacoma’s. Gonna hafta figure out twin turbos cuz supercharged 5.29’s on 37’s might all of a sudden make it feel exactly like oem again lol.

[@tacomabeast]

😂

[@aaronmann4809]

Any Tire Fitment Kit available for the 2nd gen owners?

[@tacomabeast]

Nothing yet

[@semperfiever]

Are you going to be able to buy the fender liner itself?

[@tacomabeast]

We have options for the fender liner as well, you can find them here: tacomabeast.com/collections/toyota-tacoma-fenders-bedsides-fiberglass

[@Ta_Fortis.The_Brave]

I thought 35's were only less than 1/4" larger than a 33? would not a body lift be easier? I like how a body lift gives a breathable gap from body to frame. easier to clean and tend the frame over time.

[@tacomabeast]

This one does both!

[@roberthopkins3923]

Might be a rhetorical question but will the 35 fit in the back without any adjustment?

[@edgarandreasyan521]

If you limit your up travel and don’t off-road then yes.

[@MelbourneRedM3]

The problem will be finding a shop that will do this right.

[@mtbgeoff]

Can we get more info about the silicone and paint steps? I just got this kit and want to make sure I do it right!

[@tacomabeast]

Shoot us an email at [e-mail] and we’ll give you more detailed instructions

[@Tundraholic]

Hell yea,been wanting to do this with my fenders for a minute.awesome that c4 took on the job for us,can't wait for to get my hands on these. Thanks again Mateo🤙🟨🟧🟥

[@tacomabeast]

Right on!

[@truthseeker8123]

@@tacomabeast, I have 2013 +2 long travel with +2 McNeil racing fiberglass. Can this fender liner kit be customized to work? I have been looking for something like this for quite a while. So sick of mud and rocks in my doors

[@awemin7797]

As always this tacoma beast looking 🔥

[@sawyergreggo3026]

Does Tacoma beast’s equipment and mods work with only the trd/limited or does all the stuff also fit on the SR5 tacoma ?

[@noznomcollects7276]

It should fit your model as long as it’s 2016+

[@sawyergreggo3026]

@@noznomcollects7276 thank you

[@JamesReedy]

Man I’d be inclined to spray undercoating or flex seal where you hammered all that metal back. Also putting on the edging maybe use sikaflex to keep water off the cut edge. I agree with the other poster, crazy amount of work for tires. If you don’t set aside money to re-gear it’s all the dumber.

[@JamesReedy]

I commented too soon lol. Nice…

[@beendip13]

Can't wait ordered my liners on the 5th and still waiting 😩

[@cl3826]

Do you need the body mount relocation if you're just doing 295/70r17s?

[@tacomabeast]

It’s recommended

[@khlaire109]

I’m currently running 295/70/17s on -25 offset wheels. I would go ahead and do the relocation. I did the body mount chop thinking i wouldn’t have to relocate, but i wish i had just bit the bullet and just done the relocation. I rub my body mount (even with the chop) pretty heavy. Plus it gives u the option to go to 35s if you want.

[@85ZERO17]

HOW MUCH LIFT IS NEED TO CLEAR 35’s ON THIS?

[@jasongaudreau2075]

Pricewise… this kit beats out that RCLT hd kit. And not a lot about lifting the rear in that kit. I would just like th fox lift y’all got on this truck. And at about $1k (with professional welding and paint match) this kit is perfect!

[@tuckeraustin5358]

2nd gen guys: 😍🤩 Realizes it's only for 3rd gen* 😭😑

[@tacomabeast]

😭

[@rogerwilliamcarnahan164]

Hey, I have a question. I was wondering would your body mount set up fit my 2007 FJ cruiser?

[@tacomabeast]

Hello! It wont fit but we might be able to place a custom order for you. Shoot us an email at [e-mail] and we’ll see if we can work with c4 to make this happen 🤙

[@rogerwilliamcarnahan164]

@@tacomabeast That would be so cool I mean really it's professional looking, looks like it's a part of the truck instead of a dirty chop job . I'll definitely do that thank you cause that's my next mod and I love the design.

[@MoWesley]

Hey Tacoma Beast I just got my 2023 TACOMA TRD OFF ROAD and i want to extend my driver side seat back a inch or 2 is there anything out for this truck that could do that. not sure if seat jackers would work? also whats a cool bed cover out that i could get as well?

[@tacomabeast]

Shoot us an email at [e-mail] and we’ll see if we can help you out with this 🤙

[@GLaguna7]

Hi! Do you recommend to use pedal commander for a Tacoma??

[@tacomabeast]

Yes, absolutely

[@texasermd1]

Very nice product! What is the approximate cost for the product and install for all 4 wheel wells?

[@tacomabeast]

The product link with price is in the description and the install really depends on the shop, some shops might not even know how to do it 😂

[@texasermd1]

@@tacomabeast thanks for the update.

[@805kicks]

Can someone do this for me here in California ? I’m located in Santa Barbara but can drive a distance

[@gerardocastillo6158]

Is this overkill for 33s ?

[@Poxyquotl]

with a 3in lift and proper wheel offset you shouldn't have any rubbing issues with 33's outside of maybe the stock mudflap

[@TheGreenCommando]

Very much overkill. I have 33s with a 1 inch lift and it doesn’t rub. I recommend a higher lift if you’re into off roading

[@tacomabeast]

Yeah this would be more for 35’ and up tbh, so long as you have a good lift 33s should fit 🤙

[@SAPPER510]

Does C4 offer to do the install to customers that purchase the OTF kit for a fee?

[@tacomabeast]

I don’t believe they do no

[@rogerwilliamcarnahan164]

Wow that looked awesome cool!

[@Garage57]

So what’s the biggest tire I can fit if I do this with no lift ???

[@RODRIGU3Z909]

I wish they did it to the 4th gen 4runner

[@khunmeasa6529]

i like your pick up truck ❤

[@NolanMillerArt]

The only problem with this kit is, I wouldn't trust anyone else but C4 to install it. LOL

[@tacomabeast]

😂😂

[@louieserrano8952]

Right. Live in cali but would want to plan a road trip just for this 😂

[@TheWonderWiz]

If I’m running 305/75r16s which almost 33s and I believe I have a 2 inch block kit (I believe) what would be the biggest I could go, I want to throw on 35s

[@tacomabeast]

I think you’ll probably rub with 35’s

[@raydelfa1125]

Outstanding

[@BrettL250]

How much did this cost? I’d like to get my Tacoma from Tampa up there to have him do this.

[@tacomabeast]

They don’t normally do installs so you would have to ask your local shop if they do it 🤙

[@BrettL250]

@@tacomabeast there ain’t very many shops in this world that do this type of stuff.

[@BigTapTV]

Good luck to everyone who entered the giveaway!🙏🏽

[@BDevi0us]

Nice welds 👌

[@tacomabeast]

Thanks 👍

[@leoventura4094]

Cool Custom offset biggest tire to look good setups have leaked on Toyotas now

[@moderator14321]

Dream car ❤

[@billocampo1365]

Price ?

[@tacomabeast]

It’s on the description!

[@Beastiemoreno-]

How much did all that cost to do ?

[@tacomabeast]

It depends on the shop really, but the product link with the price is in the description 🤙

[@alecgoldman5960]

know anyone in alabama that can do this install?

[@khlaire109]

I live in Mobile Alabama. If you’re in the southern half of the state I would make the drive to YotaMafia in Holt, Florida. They did my suspension work and body mount chop and did a great job. I plan on having them do my relocation when I come to getting it.

[@plow6128]

You already have 35s on this truck

[@Deebohhh]

Anybody have any good shop recs around Portland metro area? I want to upgrade suspension, wheels and tires which may require something like this if I choose to go that big?

[@J.Young808]

Hopefully you found someone. MULE Expeditions in Tualatin I have heard is a pretty good shop. There is another one too that I saw on a family adventure channel that runs a GX, can’t remember the channel name.

[@Deebohhh]

@@J.Young808oh yeah I did. I went with 503 motoring in beaverton. Labor rate was 25% plus the cost of the parts I wanted.

[@maxv1455]

And why do you need a spacer plate for the body mounting bracket? 12:08 After all, there is no sense in it in this case! You can weld the bracket directly to the frame! It would make sense if the bracket was immediately welded to it, and the whole structure would be bolted to the frame, for example, but since this is impossible, then there is no sense in this plate! Only extra metal, extra welding work! And yet it is better to lift the whole body over the frame and not cut, weld and crumple the body! (I am from Russia and I write through a translator)

[@calebrupp8059]

The additional plate is to help spread the load across the frame rail. If the mount is welded directly to the OE frame rail without the additional load plate, the mount can eventually tear through the OE frame and cause that area to fail.

[@nate654]

How much though?

[@tacomabeast]

Link in the description! 🤙

[@sinister184]

For a cut it doesn’t look bad, but I’m trying to figure out why’d you go through all this trouble and do a lot of irreversible damage to the truck instead of just putting a 6in Lift to clear 35s.

[@connorlee17]

My understanding is a 6” lift isn’t going to do as well off road, not to mention this plus a 3” lift will probably come out to about the same amount of money

[@tacomabeast]

Some people don’t really like the 6” lift and it can be a bit too high for off roading too 🤷‍♂️

[@tomasblanco1990]

Excelente!!

[@WAKO426]

Nice kit but stencils not very straight

[@dajahvue]

What if I just want the driver side done how much? Want to run 35 on driver and 33 on passenger. Lol 😆 🤣 Tokyo style bishes

[@tacomabeast]

😳

[@liamwolffenbuttel9932]

Just get an 80 series, and fit 37s with a 2 inch lift

[@tacomabeast]

🤮

[@NoItsNotTyler]

Still need to cut on an 80 series. And stock axle shafts wont handle 37s

[@Bcp69]

I wish the Tacoma can accommodate 35s without all these mods

[@triplumberelectro8611]

Voided warranty for sure. I wish somebody can make the ultimate work Tacoma.

[@kevinfitzpatrick5949]

The ultimate work tacoma is just a stock single cab w 6ft bed

[@triplumberelectro8611]

@@kevinfitzpatrick5949 what you recommend sr5 4x4 vs TRD off road 4x4.

[@joserperez5926]

Ya me veo en eya 😂

[@rafaelrosas1719]

This sounds like a pain in the butt!!!!

[@bigtimecpa4774]

$549 for some liners? yall drunk

[@tacomabeast]

Bro missed the whole point of the mod 🤦‍♂️

[@MADOutdoors916]

Good concept but the kit looks terrible and jenky. Doesnt come painted, fitment isnt very good, gotta weld pieces that should come welded. Probably cheaper to get a bigger lift than buy this kit and not have to chop and hammer shit

[@DRUMZ4LIFE82]

I’d rather just cut the cross member and do a 6” kit.🤷‍♂️

[@JYates89coupe]

First

[@Mr14041985]

Who won the tacoma tho?

[@tacomabeast]

Gavin gilo from Tennessee! 🤙