Toyota Techstream Software Demonstration

[@scottwilson6868]

I wish everyone made videos like you. Right to the point and packed with INFO. No wasted time.

[@Sam-dc9bg]

Just programmed my new key, and the VIN number on a module replacement. A+++

[@adamconnolly7478]

Awesome video, no bullshitting and straight to the point with good quality video.

[@speedkar99]

Thanks, that's my style !

[@emiliobrugueras7249]

Excellent presentation. Concise and clearly understandable. Thank you!

[@speedkar99]

You are welcome

[@junebug1701]

Excellent summary on Techstream! I'm constantly telling people to use it, but now I will refer them to your video instead. Thanks!

[@speedkar99]

+junebug1701 Thanks, yes I too was looking for this info and didn't find any so I decided to post. There's alot of little gems in techstream that other scanners can't do.

[@als1023]

Excellent overview, very helpful,, just got the software and cable, thanks for your efficient detail and clear explanations !!

[@ramiroperez3817]

Hello what type of computer is needed I order to use the techstream Software?

[@sollykhan2385]

@@ramiroperez3817 any laptop,windows 7 works best

[@abdullaalnuaimi8735]

@@sollykhan2385 do I have to subscribe to techstreem ?

[@sollykhan2385]

@@abdullaalnuaimi8735 no, no need to subscribe, you just install the software, and enable the cable with the seed key supplied, then off you go to use the software, any problems, message me, as i have got the Tech stream software on my laptop, you just have to 'PLAY' with the computer whilst plugged into a car, to get better abled to carry out all the various jobs through the systems that are available, take care , BLESS 😇

[@abdullaalnuaimi8735]

@@sollykhan2385 thanks for helping me..I appreciate your help solly.. I already downloaded techstream V16.. I need to order the cable now to start :)

[@NewsBroadcasting]

Which version of techstream do you recommend to program the key transponder on a Toyota Land cruiser 2000 100 series?

[@tarekali4u]

Hi ... Just wanted to say great video...straight to the point and no messing about....I have a quick question..I have a Toyota Auris 2013 (MK2) - UK - will this work if so which cable do I need and software? and where can i get the software from? Will be super grateful if you can get back to me please, Thanks!

[@jimbochard1]

great demonstration. How do you access the actual odometer mileage from Techstream?

[@jksmith8077]

AWESOME AWESOME review. Thank you so much for this!

[@speedkar99]

Thanks, glad you found it helpful.

[@CHIBA280CRV]

That’s how you make a informative video 👍🏼👍🏼👍🏼👍🏼👍🏼

[@speedkar99]

Thanks 👍

[@SK4869]

oh woww this is pretty awesome. love it. thanks my buddy, was missing your videos :)

[@speedkar99]

Your welcome.

[@SK4869]

thanks, i would love to buy this for my Toyota, the price is definitely worth it & save you lots of money in the future. have a wonderful day :)

[@CHEPEX1024]

+speedkar99 Hello I have 2010 is250 can I reflash the ecu or the tcm ?? Thanks

[@speedkar99]

You probably could if you had a subscription with techinfo, but I wouldn't trust this cable to reflash my ECU, you might want to get the higher end ones.

[@geozerogeorge8050]

Hi...this the best 'tutorial' on Techstream that I've seen (and I've seen a bunch). I am hoping that this gets to you even though I know this video is a few years old. I've recently purchased the cable and software and begun using it. However, it seems the functionality is limited. I can 'see' all the ECU's in the list, but many of the ones I want to interact with have the * stating that "ECU not supported or not responding"...but its doing it for the TPMS, immobilizer, SRS, which I know the truck is equipped with. Any idea WHY???? or how to get around this? I really want to program a key using the software (I was able to program a remote), but the key is under immobilizer and that is one of the ECU's that has the *. your help is really appreciated! thanks!!

[@speedkar99]

I never got that. But it seems with any vehicle newer than the software I don't have full access to. For example I can't program tpms on my 2011 Sienna. Or access certain ECU on my brother's 2012 IS350

[@JJFLD]

Would I have to use Techstream or Techstream Lite for key program on a 2019 Toyota RAV4 Hybrid?

[@speedkar99]

Techstream

[@ponderingnugget]

Thanks for the great video! can you post a link to the mini vci cable? I've found a few on ebay, but I'm not sure which one is good. Thank you!

[@speedkar99]

I bought this so long ago that I don't have the link anymore. There's probably a newer version of the cable but mine still works (because my cars are all older than the cable lol)

[@micromaster9629]

OMG hats off man you are rock.

[@speedkar99]

Thanks. This is not rock science.

[@bryancory]

Fantastic video - I just got my techstream connected this weekend. Do you happen to know which setting is for the 'walk-away' lock? My Tundra locks itself after 60 seconds, even if the key is inside the car! I think I found the timer setting (30/60/120 seconds), but not where to turn it completely off - THANKS!

[@speedkar99]

+Bryan B I'm not sure, just poke around with the power lock menu, the description in the software is quite vague so it can mean different things.

[@SellanKolla]

How much information you need? This guy: YES You gotta admit...this is the best tutorial video ever... ain't no way i thought this much of information was on this video when i click it..

[@speedkar99]

Glad you appreciate my work, thanks

[@ShakeYourNoobs]

Is there a way to check the real mileage when buying a used toyota car?

[@thomastalks3841]

Great video, any idea how to clear the VSC light on the dash after using techstream?

[@YLJW4]

find the OBD socket and locate pins 4 and 14 (find a diagram on line) use a paper clip to short those two out, turn on the ignition (don't start the engine) wait 30 seconds the ABS and VSC lights will flash, take out the paper clip and turn off ignition, start the engine and the VSC will be gone.

[@halfglassfull]

Old but good. Do you remember what firmware the cable is running? Alot of conflicting info out there and all the j2534 cables show 1.x firmware but other folks say 2.04 is needed.

[@freddydee270]

Thank you great Video . Where can I get the TechStream software or does it come with the cable?

[@speedkar99]

+Freddy D it comes with the cable but there's dark areas of the internet where it can be downloaded ....

[@ScubaCat3]

ABS air bleed... that's NICE. One less thing I have to pay a shop to do if/when that day comes. Thanks!

[@speedkar99]

It only works if your car supports it. Although that option was listed on my Lexus ES330, I clicked on it and it said its not available.

[@ScubaCat3]

That's a bummer. That'd be one of the best features if available because you can't normally bleed ABS without a machine.

[@bhesse]

do you have a link to the ebay site for this ?

[@euniltumongha35]

Is toyota hilux revo 2015 model they have option of automatic side mirror fold when the car is off??

[@YucanDuit]

Thanks for this video. I need this for my TPMS sensor programming. Customization would be nice too

[@alexanderconcha7187]

Will the software still work for 2019 vehicles?

[@speedkar99]

I tried. Some of the menus aren't there. You need the latest software for the latest vehicles

[@BloomfieldProductions]

Can I modify air fuel mixtures or is that out of this cars league

[@muhammadm1237]

Is the software free to come with the cable or sold separately?

[@jamescc2010]

Can it add new chip keys and smart keys for many popular car models?

[@AdamvanAlderwerelt]

Thank you. This was a very informative video. I think I'll buy one soon for my wife's Toyota. Any chance Honda has a similar product?

[@speedkar99]

Honda HDS but it's much more expensive

[@EyeOfTheTiger313]

hi the option for "P/W UP W/TRANSMIT " is not showing for me but for the "P/W down W/TRANSMIT " is exist

[@NebulaElite]

Is it possible to create activation code for updating navigations?

[@brasil_bolsonaro7324]

how to open the electrical diagram without connecting to the vehicle? only with the program in the notbook?

[@speedkar99]

I didn't know techstream had electrical diagrams.

[@brasil_bolsonaro7324]

@@speedkar99 In fact I would like to know if it comes with an electrical schematic. he understood

[@jamescc2010]

Toyota RAV4 2015 all remote botton/functions on original remote head keys and a new key I have just added are not working. The old remote stopped working in the past base on the customer. I used Techstream to add a new key with no issue but unable to erase or register remotes. Kind of lost, any tips - bad fuse or something?

[@wayne-ie2tz]

To get the buttons one the key fob to work they need to be programmed with Techstream. 1 programming the remote keyless door lock functions so from the "System Selection Menu" choose "Main Body" 2 then "Utility" and "Wireless Code Registration." 3 At this point the "Wireless Code Registration Wizard" popped up: 4 follow the prompts, and the programming was complete. At this point you could click "Next" for another key or "Exit" if finished. Takes all of 2 minutes. 5 You can then prigram the immobiliser chip so the key would actually start the engine. From the "System Selection Menu" I chose "Immobiliser" if you haven't already.

[@javiles2331]

At Toyota dealership they were asking $230 per tpms sensor, I was like there’s gonna be a different way…

[@johnmullen2804]

Yeah Walmart

[@sodade21]

I have a Prius 2007 EU. I brought this cable cause some people said that the alarm was disabled and i could enable it. When i choose security there are no options showed... same as windows,lights etc.. only AC and interior lights have a few options..... that means that my car has not an alarm installed or am I missing some settings configurations in order to enable/see those options?

[@speedkar99]

If it doesn't show up then you don't have that option. I have a video of me enabling the alarm on an 06 Sienna I've also successfully done it on an 09 sienna But the security menu doesn't show up on my 04 Camry 😔

[@samersarhan]

@speedkar99 Great demo! Thank you. Could you please demo the BSM sensors diagnostic and (if possible) calibration capabilities of Techstream SW? Those sensors are problematic pieces of s**t and expensive to replace or calibrate at the dealership.

[@speedkar99]

+Samer Sarhan I dont have a vehicle with BSM to test it out on.

[@MartyMotoring]

Awesome information! I’ll be changing a few preferences on my IS350 and tracking down my ABS/VSC issue

[@speedkar99]

This cable is Soo useful for diagnostics

[@moosasyed1011]

The only video that is helpful. Thanks you sir

[@florentinarin7728]

I can't use this , is asking me for dealership name , code of dealership etc . When first time trying to open the software they asking me to put into there. Where I can found those info? Looks like you pay for cable and software and after you need to pay for use it. Depending on how much want to use you pay from $20 to $65 for 2 days.

[@florentinarin7728]

Thank you for video . I will try for remote control of the door. Got the software installed and programmed the keys.

[@florentinarin7728]

@@messengercrew1627 hi. Yes is working , I bought from Amazon , finally I received the instructions for installation of the software, and is working , programmed the keys . Need to try to program the remote control of the keys.

[@florentinarin7728]

Hi . Can you put video about how to program remote control. Thank you

[@speedkar99]

I already have one.

[@florentinarin7728]

@@speedkar99 Sorry I can't found , I programmed the keys to start the car but not the remote. Thank you

[@fenix0green]

Is there any site that tells you if your car has the hold unlock and all the windows go down? before buy the software?

[@speedkar99]

No

[@speedkar99]

The owners manual tells you all the features the dealer can customize for you

[@shahidmunir5277]

Can you please give us the link of your supplier of this cable and software.

[@speedkar99]

+Shahid Munir see video description

[@brentthomas2389]

umm..did i miss it? will it turn off door ajar and seat belt chime noises?

[@speedkar99]

Seat belt yes

[@nhz013]

nice. i wonder how you have come across this? also what is being used to communicate to honda and bmws, audis and mercs? that should be interesting. if you know kindly share. if you think about it, a lot of mechanics in us uses snap on and matco scanners. but abroad people use laptops and pc to connect to the car. i have been wondering on how to connect using a laptop for so long. live datastream would be a piece of cake now thnx again

[@speedkar99]

nhz013 Glad you found it useful. A laptop with live monitoring would be great to monitor fuel trims and such. I am not familiar with other vehicle brands but I can only assume they have a proprietary software too. Having the techstream cable makes OBD readers redundant because you can read so much more information.

[@ohyeahyeah5116]

Very informative video! I have a 2004 Lexus SC430. What do I need and how much would it be for the full setup?

[@speedkar99]

Same as here. Check Amazon

[@ohyeahyeah5116]

speedkar99 oh ok thank you. I am guessing the version does not matter since it is an older model sc430. Does Techstream also support its hardtop convertible features? Because mine is not working and I would rather diagnose it myself than go to the dealer.

[@toddjones7041]

Hi, thx so much.. do you have the link to the one you bought on ebay? Do have install instructions? thx again

[@speedkar99]

I don't have the link Description has a link to instructions I followed

[@RevLexus]

Cool video, any idea how to clear the VSC / VSC off light after using techstream on a Lexus?

[@speedkar99]

The vsc light shouldn't be on after using techstream... Use techstream to read what the codes are

[@RevLexus]

@@speedkar99 yeah, the only code I have is p0125 (which I knew before using techstream). I read on a forum the yaw/acceleration can be reset after using this software :/

[@rickyao2468]

Where did you get the software? I need to program a new key on my 2010 Camry.

[@speedkar99]

Comes with the cable or follow the tutorial linked in description

[@chadjansen9097]

@@speedkar99 It comes with the cable? Always? Humm

[@seaneby2489]

Would this work on a Pontiac vibe 2009 it's a Toyota matrix under the hood

[@speedkar99]

+sean eby it might

[@mubeenvali]

Hi friends dose this software find out which hybrid battery pack need to replace ? Or any other software can , really appreciate.

[@micasaveiro]

Dr Prius

[@Steve211Ucdhihifvshi]

question for you, have you ever clicked on the intrsument tab? I bought an american dash for my car with mph and klmh but the kms are 3x more than my original. Is it possible to program it to the correct valid value? or can you read the oem miles off the computer to show that my milage is less than shown? Cheers

[@speedkar99]

Check out my speedkar100 channel I have odometer reprogramming videos there

[@uniquepremji9375]

Would additional thing I need to program fob I bought from Ebay?

[@TrisnaWijaya]

Good explanation. And how about GM Car, this software and cable can use?

[@speedkar99]

Not this software

[@TrisnaWijaya]

@@speedkar99 ok thank you,

[@Matt-xq6ow]

With Toyota Techstream, are you able to calibrate your speedometer? I have larger tires, so I want to calibrate for that.

[@speedkar99]

I've done the speedometer test mode but I don't recall there being a calibration

[@fancy8365]

Can you link what one on ebay you got? Also is techstream free where did you download it? Does it work in a Toyota from 2018? I want to save all my stuff so if I have any issues coding is saved and take off seatbelt warning because it's superloud and annoying. I didn't save every thing on my last car and when I had some issues with electrical no one could fix it but dealership.

[@yamanslab5222]

I cant find the power window options for my Toyota corolla 2018 even tho I'm using the latest techstream, any help?

[@speedkar99]

On basic cars like that it probably isn't customizable

[@ochisettingz3383]

@@speedkar99 "basic" ouch!

[@TheRouteShow]

How to do this on Honda cars? Please teach us

[@speedkar99]

+TheRouteShow Honda is more complicated, you need a more expensive module and it doesn't work as easily as techstream. For that reason I prefer to stay with Toyota.

[@joeherrjr]

Really nice overview, thanks.

[@speedkar99]

You are welcome

[@Limeayy]

i have a question, so the Mongoose Pro equivalent for that cheap one you bought off ebay are exactly the same? One's $500, you're is probably less than $100

[@speedkar99]

+Lime never heard of it

[@Limeayy]

err. its made by drewtechnology. Its what people that buy techstream lite's use as the cable to their VIM.

[@JoseGarcia-px9xj]

i bought a prius with original fob(locksmith toll me the fob is working) , when i try to turn on, the display show me no key detected. There's a way to use teachstrem to reprogram the fob, maybe the former owner change the ECU

[@speedkar99]

Yeah techstream can put the car in for programming mode as long as you have a master key

[@bobo5150]

Can you rewrite the VIN number on a used ECU to match the car?

[@keany1976]

Hi, my data list only shows a list of about 4 parameters. Do you know how I can get the full list to show? I am wantung to read injector values. Thanks

[@elyeschabchoub1564]

Hello. I am in you case with diesel injectors reading and recalibrating. Could you resolve it? Toyota's technician said don't do it since this can damage the ECU programs !! I think they are not skilled to work with it on diesel engines.

[@TheTransporter1461]

Is it possible to turn the alarm system on on a 2001 Toyota RAV4 using TechStream? And which features won‘t be available compared to the car in your video?

[@speedkar99]

+TheTransporter1461 that won't have any features. It's too old and economy class, it was more the luxury cars that had customization at that time period

[@TheTransporter1461]

speedkar99 Okay, thank you!

[@sara78130]

Hi mate I have Toyota Auris 1.4. I replace clutch actuator After that not Gear Display on the dash also no acceleration on the engine

[@speedkar99]

Cable?

[@sara78130]

speedkar99 not cable

[@el.oscyppo]

Is it possible to change menu language on the screen between the gauges by using this soft? If yes - where is the option?

[@Heysahs007]

Sweet video. Thanks for the upload

[@speedkar99]

You are welcome

[@atadali6199]

when programming (adding) a new key: can u restrict a rev-limiter (rpm-limiter)? I want to make a safe (low performance) key for my teenagers and my driver for my race car. I think i saw somebody doin that with techstream.

[@speedkar99]

Hmm I don't recall that being an option on any Toyota. I know Ford has had that for a while.

[@atadali6199]

thanks man. maybe it is another software and maybe it would be nice if u check it by surfing and navigating techstream and come with a warm feedback☺

[@reyes6386]

What about other functions like throttle relearn or zero point calibration?

[@MrGeorge48]

I have 16 version of the techststream software. i don't not see a door lock item on my list and i cannot connect my fob to the suv? please help

[@speedkar99]

Try a newer version? Not all featurss show up on mine either

[@mistermaster1945]

can we get details information as techstream does if we use scan tools that available in the market e.g snap on, launch. . .etc??

[@chriswebb1333]

Hi I am kinda slow at this tech stuff. I bought "MINI VCI TIS Techstream V18.00.008 TIS J2534 For Toyota Inspection Cable" from ebay today for my 2003 Toyota Sequoia Limited in which the immobilizer will no longer recognize the original keys after fixing the ignition switch tumblers. How do I use this to fix the immobilizer issue so my Sequoia will start?

[@speedkar99]

It needs to have a master key to program new ones.

[@brightfame7984]

Does it have a function that can enable automatic door lock on a 2006 Highlander?

[@speedkar99]

+Robert Reyes Yes

[@staticshock1343]

Could you also post the link that you downloaded the software from?

[@speedkar99]

Its in the description.

[@gregh7457]

@@speedkar99 No its not. i looked in the description

[@on-site4094]

speedkar99 every time I download Techstream it’s corrupt ,,,,,the link is not in the description

[@Anavllama]

Is there a way to turn TPMS functionality ON. CanadiaRAV Prime has no TPMS and I would be surprized if they removed the code vice just turning the feature off. Would I be able to use this tool to turn TPMS on for example??? IF not would the technicians at the dealership with full TIS access software potentially be able to do so??

[@ssj22vuofficial]

What version is your techstream? I tried to check the hybrid battery level but keeps crashing.

[@speedkar99]

8 I think

[@ramdanelimam7620]

we can scann th hybride battery for prius ? to see each bock voltage ? thanks

[@speedkar99]

I've never tried this on a hybrid vehicle

[@abbassharif3718]

A quick question, Does Toyota techstream supports all these features for every toyota ECU? TIA

[@musiqsoulstar06]

Did the software come with cable. I have a 2008 corolla I need to get my key fob going since my car wont go into programming mode.

[@speedkar99]

Mine did but it was corrupted and I found it online somewhere

[@entingbotyok4385]

Can you program to remotely start the enging? I’ve got a fortuner crusade 2018.

[@rickjames6948]

Get a bus pass before asking dumb questions like that.

[@joshbennett6293]

Hi mate is this capable of programming a repalctment ECU in the car ? The one in the car is faulty and has no Comms ? Thnanks

[@speedkar99]

No, I wouldn't trust this cable to flash an ECU

[@joshbennett6293]

@@speedkar99 thanks for the reply do you know a decent ECU programmer for Toyota or would I be better getting a genuine version of this

[@kylekipper6060]

Are you able to enable transmission relearn with this version of techstream?

[@speedkar99]

Not directly, but you can clear all DTCs

[@ramiroperez3817]

Hello what kind of computer is compatible in order to use the tech stream program? Where did you buy the tech stream program?

[@baazzaa13]

Seems like both my Lexus is250 and jzx110 don't have customise options, should I install an older techstream? Did you have to do anything to get customise options? Thanks

[@speedkar99]

Old cars don't customize

[@carterclay6508]

Can I adjust my odometer with this software? Bought a new cluster and I wanna add miles to properly reflect the current mileage. Thanks.

[@speedkar99]

Please check my speedkar100 channel for odometer reprogramming videos

[@hypervish89]

Do you have the ability to reset the transmission behavior using this techstream software? A simple battery disconnect is not what I am referring to.

[@speedkar99]

Hypervish95 I have not gone into the depth of the software to see if you can clear the way the transmission "learns" your driving style. I do know that you can clear all DTC's, but I don't think it resets your ECU like a battery disconnect.

[@sivarajsivraj6296]

Please put one video Toyota corala 2019model 1.6 engine warning lights in the meter board.

[@speedkar99]

Get it scanned to see the errors

[@divasmom65]

So do you have to pay a fee to use after you buy the cable?

[@speedkar99]

No

[@cannorm7256]

it can only open the windows ? what about we lock the car and close all windows ? is it possible

[@speedkar99]

That would be a liability

[@Dragon-yj2fl]

Hello how to open and close the brake when replacing the brake pads I must be done in service mode in totota avensis?

[@speedkar99]

Techstream?

[@beast4x4trd12]

Open with a sea clamp. Close when new brakes (pads/rotar) by starting engine and pumping brake pedal slowly until it gets hard *(also check fluid, if it's low and brakes need changing DON'T add brake fluid, once old pads are out, sea clamp with flat metal to cover both pistons evenly and as you close clamps to open caliper to fit new pads it pushes fluid back into reservoir. If finished brake job completely and still low, add as needed but shouldn't need to add much.) As brakes wear the fluid level drops, once pistons compressed closed it send it back into reservoir. Techstream won't fix brakes!

[@creamyapplegaming8245]

Will this work with obd1 if I get an adapter

[@speedkar99]

I don't think techstream will work on that old of a car.

[@DynoSauR4Truth]

Where do you get the Techstream software is the question.

[@speedkar99]

eBay

[@DynoSauR4Truth]

@@speedkar99 Ebay is a large place and why do most versions of TechStream say that they are for Windows 7? Most people have Windows 10 in 32 or 64 bit versions.

[@TheWaterStream]

Thank you so much for you awesome video! Any idea where I can download the Tech Stream online? I don’t have CD player to install it on my computer. Would it work on Lexus CT200 H 2012?

[@speedkar99]

It should work just make sure you find a later version of the software

[@motorcare1045]

you can latest version of Toyota Techstream just Skype: ultratechdiagnostics

[@frankierodriguez5620]

Do you know if this can calibrate the SRS passenger side system? I have an airbag light on.

[@on-site4094]

Where to get the software and cable? I need to change transmission fluid on is350 to check fluid temperature

[@speedkar99]

Ebay

[@on-site4094]

@@speedkar99 thanks

[@crskro]

What website did you get the Techstream software from?

[@rickjames6948]

google.com

[@matthewblack8552]

I'm having issues with the rear power lift gate not opening/closing on my Lexus NX. Would the computer be able to detect which power lift strut is failing? They are extremely expensive to R&R.

[@JoseGarcia-px9xj]

what about if you are not able to go to the ignition position

[@kulchan9968]

Will this work for Toyota fortuner 2019 smart key programming? Or do I have to register or buy key code from factory after buying the cable?

[@speedkar99]

You should be able to add keys. Get the latest techstream

[@kulchan9968]

Can't ship to India.... Problem. How can I get the teach stream software? because cable I can get in a local store..

[@GraydonTranquilla]

Is TechStream computer required to download new Navigation maps for factory installed navigation systems...?

[@speedkar99]

Isn't that DVD based?

[@GraydonTranquilla]

speedkar99 LEXUS document L-SB-0083-13 state the following: “Lexus models equipped with HDD Navigation require a special service tool and follow a unique process for updating map, poi and system software. Instead of individual DVDs installing, all ma data is uploaded directly to the HDD.” Further on it indicates that the uploading is performed thru the OSB2 port which is the typical diagnostic port used by Dealer service shops. OSB is it OSD2 is a standard vehicle service port using CANBUS communication protocol....which is essentially the time based conventional modbus communication protocal.....In this way the manufacturer thinks they can ensure mapping updates cannot be hacked and the related encryption keys etc. Are downloaded via internet to the dealership via PC but most often via their dedicated Techstream computer service tool.