Toyota Tundra LED Headlights & Fogs How To Install - 3rd Gen 2014+

[@a.r.r.5626]

THANK YOU!!!! I followed your video step by step. The entire process to change both factory halogens to LEDs took 1 hour. I would have been done sooner, but the rubber boot had a difficult time fitting around the new LED lamps I installed due to the fan on the back of the LED. EXCELLENT instructions! I had to remove 2 additional 10mm bolts on each side that were holding the fender well covers. Besides that, VERY easy! If YOU are thinking of following this video to replace your headlight lamps...do it. It is not as difficult as you may think!

[@PrecisionLED]

Glad to hear it went smoothly!

[@mixflip]

I drove in fog and snow today and could have seriously used more light. My stock lights almost felt like they were not even on lol. I'll probably at a minimum swap out the fogs.

[@PrecisionLED]

We hope you were able to upgrade smoothly!

[@mixflip]

@@PrecisionLED I sold the Tundra. Will be buying a new tundra soon though.

[@laloplascencia7642]

I bought the one you have in the specs and are different that the video you show up

[@monetsengnalivong6471]

After I install mine led bulb it aim up too high is there a screw to adjust it more downwards

[@melcrisjuralbar6150]

when you bought the kit, is the resistor kit comes with the package already or you buy it separately? thanks

[@PrecisionLED]

The LED kit linked in the description comes with everything you will need to upgrade your headlights to LED without any issues. The resistor is not required anymore, as we have since upgraded our LED ballasts to come with built-in resistors to ensure you do not experience any dash errors, flickering, or other issues with your headlights.

[@AlejandroTorres-wp3yd]

Hey I just wanted if you can help me with a problem that happend I accidentally installed a cargo bulb in the right map lamp and now none of the interior lights would turn on

[@The_Autumn_Wind_]

This video is very well done. Helped me out a lot. Can you give me the link to the fog lights kit? I will be purchasing both kits from you.

[@PrecisionLED]

Thank you for your interest. You can find the headlight/high beam kit here: goo.gl/XHUdCQ And the fog kit here: www.precisionled.com/premium-h11-cree-led-headlights.html

[@The_Autumn_Wind_]

PrecisionLED Thank you!

[@brandiherring7934]

I have a 2018 Toyota Tundra I want to buy headlight and fog lights...I found headlights can you please give me the link for fog lights?

[@PrecisionLED]

Here is a direct product link to the fogs installed in the video: bit.ly/2PcnMXK

[@carlosquintana6930]

My question is when you order the headlight the come with everything you need?

[@PrecisionLED]

Yes, the LED kit linked in the description comes with everything you will need to upgrade your headlights to LED without any issues. The resistor is not required anymore, as we have since upgraded our LED ballasts to come with built-in resistors to ensure you do not experience any dash errors, flickering, or other issues with your headlights.

[@Ihaveadashcam]

Please do video for Acura TLX only needs led trunk,door courtesy,vanity mirrors,glovebox,and console.

[@PrecisionLED]

Thank you for the suggestion. We will keep an eye out for a TLX out here in Los Angeles for a video shoot. However, I would recommend having a watch on some of our other installation videos. The process is typically very simple for all vehicles.

[@malberto180]

Job well done Precision LED!

[@PrecisionLED]

Thank you for the support!

[@andrewi7526]

Great video, any pictures or videos of the light output?

[@PrecisionLED]

Yes, there are output pictures posted on the product package here: goo.gl/XHUdCQ

[@tacoma5964]

Dam to change the bulbs light have to remove all of this ?

[@eddiemadera5587]

hahaha I was just saying the same thing....LOL

[@music10095]

Nooo

[@carlosquintana6930]

Oh yeah all new cars you got to disassemble the whole front end almost

[@PrecisionLED]

It's actually pretty simple if you follow the instructions in the video!

[@10RFuentes]

If you have fender flares like me you have to remove those too

[@christph3118]

Henry Fuentes Why do you have to remove the flares?

[@PrecisionLED]

No, you do not need to.

[@qualitytouch]

Great vid....the small front bumper piece that you removed (located directly under headlight) what's that part called??? Trying to replace.

[@davepeace4037]

Which size of resistors did you use in this video? The link in the description only lists bulbs that were used.

[@PrecisionLED]

Actually, we have since upgraded our ballasts so that the resistors are not required anymore. The kit in the description comes with everything you will need to upgrade to LED.

[@loisexotics]

Thanks so much for your video. I fallows your instructions and it was really easy. Once again thanks. 😀👍

[@PrecisionLED]

Thanks for the positive feedback! 😊

[@SFtown08]

i have a 2015 trd pro and i am really interested in doing this. Do you have any photos showing the light projected on a wall. I just wanted to make sure the wasn't any light scatter. Thank you for any help

[@PrecisionLED]

Thank you for your interest. Unfortunately, we do not have any photos of the LEDs projecting off of a wall. However, if you are concerned about glare, there are many factors and many upgrades to headlight housings over the years that help mitigate any glare to oncoming drivers. It is more or less the color of the light which causes distraction and not the actual brightness intensity itself. If you notice, the most distracting lights to see on the road are the blue HID lights which cause a lot of glare for the human eye, whereas you probably never noticed the 6000K lights on the road because they are more natural to the human eye.

[@mkr733]

Hi 👋 on the link When I click to purchase fog lights it takes me to headlights? Just making sure im still ordering fog lights? Even though it says headlights? Thanks!

[@PrecisionLED]

Thanks for your interest. Yes, that is correct. What is important is the bulb fitment. You would just want to make sure you are installing an H11 bulb type on your fogs (which is the product linked in the description).

[@besmirmujaj9]

Hey do you guys know if the new 2020 Toyota led headlights will fit with 2016 tundra sr5 trd

[@PrecisionLED]

Yes, the products linked in the description box and installed in this video should be compatible with your 2016 Tundra!

[@jorgeescobar1459]

When installing this product will I still have the ability to adjust headlight level i.e. adjustment knob in the cab

[@PrecisionLED]

Yes, the LEDs will act exactly as your halogens do. They will just be much brighter, and have a nice, crisp, LED look.

[@tideishigh8990]

Am I able to put these in my Spyder projectors?

[@veronicaserrato9827]

Hi would this kit fit my Toyota Tundra 2019

[@PrecisionLED]

Yes! The installation process and all of the products linked in the description box below the video are compatible with your 2019 Toyota Tundra.

[@veronicaserrato9827]

@@PrecisionLED thanks 🙏

[@brasseur717]

is it just me or do the low beams stay on when the high beams are on?

[@blakethompson5990]

What all do I need to redo my headlights and fog lights on 2017 tundra?

[@captsam54]

I am looking at this too.. The LEDs and tools used in this tutorial can be purchased at www.PrecisionLED.com Direct Product Link: bit.ly/2aHi5wx And the headlight conversion cost approx $280.00

[@PrecisionLED]

Hi! Your 2017 Tundra is compatible with the installation shown in the video. Product link is in the description box below the video!

[@juanmanuelmolina9818]

What link or kit do I need for 2017 Toyota limited Tundra crewmax . Thanks

[@PrecisionLED]

Thank you for your interest. The linked products in the description are indeed compatible with your 2017 Tundra Crewmax.

[@danh6486]

Hey brotha, do you have a video on how to put the leveling motor from stock heads to the spyders?

[@christph3118]

D H Check Tundras.com..should be a demo

[@PrecisionLED]

Unfortunately we do not!

[@philippestrapko1]

Why would you need the resistor kit?

[@PrecisionLED]

The resistor is not necessary anymore, as we have since upgraded our ballasts to newer technology to ensure you will not experience any dash errors.

[@EricNelson22]

I've been looking around for lights for my truck, but I've found GTR Lighting doesn't need resistors. Why do yours?

[@PrecisionLED]

Thank you for your interest. The kit being installed on this truck is an older model LED kit we used to carry. We carry a newer CREE kit which does not require any resistors for any headlight installation.

[@lilbuddha09]

will this setup interfere with the auto light adjustment?

[@PrecisionLED]

No it will not. The lights will act exactly as your halogens do. They will just be much brighter, with a nice LED look to them.

[@lilbuddha09]

PrecisionLED the kit was not available anymore is there a different one i can purchase for this same vehicle?

[@PrecisionLED]

The kit is currently on backorder. However, we do expect a replenishment of inventory in the next week or so. I would recommend checking the link in the description then, and it should be working again.

[@mixflip]

Subbed btw.

[@PrecisionLED]

Thank you for your support!

[@thejasonkellett]

Great vid!!! Name of the background music?

[@PrecisionLED]

It's actually a track that a friend of the company put together for us, we will try to find out if we can make it available!

[@TheMasssh]

thanks great video

[@PrecisionLED]

Thank you for watching!

[@tonyclifton474]

How many lumens?

[@PrecisionLED]

The LED headlights would project ~6000 lumens each, or ~12,000 for the pair.

[@geraldreichling2366]

owners manual shows you don't have to take grill off

[@PrecisionLED]

Thank you for the input!

[@nickshuler6633]

The 2020 tundra is already LED. The head lights are but not tail lights

[@PrecisionLED]

Thanks for the info!

[@LVang152]

I worry about the melting the snow in winter.

[@PrecisionLED]

Thank you for your interest. Our products are rated to perform in very, very cold temperatures. You do not have to worry about this.

[@no_handle_required]

This video just guaranteed i'll never buy a tundra. remove the grill and side flashing to change a f'ing light bulb? No.

[@PrecisionLED]

It is actually not too difficult if you follow the instructions in the video!