To get the pin out of the horn ground wire you need to pry up the lock on the top of the plastic connector and then insert a push pin into the little round hole to release the terminal. The terminal will come out easily and then you install it into the top left slot until you hear it click to lock in place. I'm going through an install of the cruise control for a 2013 regular cab 2.7 manual transmission Tacoma and hopefully I get it completed soon.
@warrenlucier5796Ай бұрын
If you need to go back in for the horn connection, the terminal goes in the with the crimps facing up and you'll be able to see the bare wire. Once this is oriented in the correct position it should lock in place. Best on it and your prewired probably due to having the automatic transmission vs manual.
@dawtonnicholas2 ай бұрын
Excellent, great video, Sooooo easy, only took 10 min. Having cruise control in my previous car, I missed it so much. I fitted this in my 2013 Auris, only difference was the horn is plugged in separately so just plug and play for me. Thanks
@abedelrahmansalah7993Ай бұрын
Mine got shift pedal behind the steering wheel, I can only see the south hole can the the right and left holes Can anyone help ?
@medelhadikhedim4 ай бұрын
Found your video very interesting, I have one question: how can I check if the cruise control can be compatible with the Yaris I have? I have a Yaris 3 from 2012 with a Diesel engine D4D
@DaBinChe4 ай бұрын
as far as I know all modern toyotas of this era use the same cruise control stalk part. Just take the air bag off and look. Besides thing is only $15.
@medelhadikhedim4 ай бұрын
thqnk you @@DaBinChe
@dawtonnicholas2 ай бұрын
Take a gamble, the part to buy is very cheap.
@sabirali56564 ай бұрын
I am from Pakistan i own 2013 model Car.. Kindly tell me it have cruise control option?
@DaBinChe4 ай бұрын
take off the airbag and see if the connect where I plug in cruise control has three pins if so you have cruise control option