Cruise control installation in Toyota Prius 2010 to 2014(3rd Gen).

[@ShaunFreeman-s5o]

Really appreciate your informative presentation. I only struggled to get the pins into the connector, but I managed after repeated attempts.

[@Autohelpinghands]

Thank you very much for watching. Kindly like and subscribe to my channel.

[@robduthie2979]

Test and works on 2012 Prius Phev OK, the plug wiring had a few more wires in it, as long as it is in the same position it will work OK, Earth wire not required when supplied with the Ali express kit. as the G5 plug has a earth already wired into. The G58 plug will vary between models with different wiring as long as it is in pin 22 it will work.

[@Autohelpinghands]

Yes you Don't need earth wire. G58 plug have 35 pins and for 2015 using different pin in ecu.

[@tahaalmadani5823]

Why do we need earth wire? What is its function

[@19Ability]

What about Prius 2010

[@robduthie2979]

@@19Ability Not sure

[@emanuelbale6298]

Interesting!

[@Autohelpinghands]

Thanks

[@19Ability]

Camera not showing some stuffs though i cant see how you inserted the wires into the other side . If you can explain i will be glad😊

[@Autohelpinghands]

ROUTE THE BROWN CRUISE ECM HARNESS TO THE ECM BEHIND THE REMOVED LOWER INSTRUMENT PANEL. LOCATE GRAY CONNECTOR G58 (TOP) OF THE ECM. BE SURE TO PRESS IN TABS ON BOTH SIDES TO PUSH UP TERMINAL RETAINER AT THE CENTER OF CONNECTOR. INSERT ECM TERMINAL FROM THE BROWN (59B-05877) ECM HARNESS INTO PIN 22

[@19Ability]

@@Autohelpinghandstoo many terminology sir thanks for the response am not so good with this term ECM can you do another video on how to link or from the part where you connected it well to the other end that’s where I got confused

[@rajithalakshan4815]

Is that Additional wire is necessary to ECU? Because in alli express they are not providing it. I have 2011 prius 3rd.

[@Autohelpinghands]

If you buy from Ali express, they will send you two wires, one for ECU and the other for ground(-).

[@amranmahmood]

Are you from Uk. Where. I want to install in my prius 2013..can you tell me prize for equipment

[@Autohelpinghands]

No I m not from UK

[@alinadi100]

I have 2012 toyota prius T3. Will it work if I follow your video?

[@Autohelpinghands]

Yes definitely

[@ranahamzaakram2902]

Hi brother can you tell me why you removed panel..?

[@Autohelpinghands]

You need to remove the Panel for tie up properly the cruise control cable which will be connected to Car ECU.

[@tahaalmadani5823]

What cable do we need for connection Where can we buy it What are the specifications of that cable

[@Autohelpinghands]

You can buy it from Amazon or Ali express

[@tahaalmadani5823]

Will any other wire work from other harnesses

[@malikalimushtaq]

Can you please tell me about 2015 which pin it needs to go in ecu? I tried one you told in this video but it didn’t work.

[@Autohelpinghands]

Prius 2015 have different connections.

[@malikalimushtaq]

Can you please explain ecu connection for 2015 I will really appreciate that. Thanks

[@Autohelpinghands]

ROUTE THE BROWN CRUISE ECM HARNESS TO THE ECM BEHIND THE REMOVED LOWER INSTRUMENT PANEL. LOCATE GRAY CONNECTOR G57 (2ND FROM TOP) OF THE ECM. FIGURE 16. BE SURE TO PRESS IN TABS ON BOTH SIDES TO PUSH UP TERMINAL RETAINER AT THE CENTER OF CON- NECTOR. FIGURE 17. INSERT ECM TERMINAL FROM THE BROWN (59B-05877) ECM HARNESS INTO PIN 28 (CRUISE CIRCUIT) OF CONNECTOR G@malikalimushtaq

[@malikalimushtaq]

@@Autohelpinghands thanks for your reply is there any way I can contact you directly? Thanks

[@m.d4460]

Hi there, what headunit do you have?

[@Autohelpinghands]

Android after market

[@m.d4460]

@@Autohelpinghands ali express? Id like the same model.

[@diy-ft7js]

What are the part numbers to buy?

[@Autohelpinghands]

You can find it from Aliexpress or Amazon.

[@19Ability]

Give us a link please am in the UK I want to fix this stuff my self

[@kakloloful]

Bro your video would have been more informative if you could have edited a little bit...

[@Autohelpinghands]

Thank you for your suggestion.

[@kakloloful]

@@Autohelpinghands Sir i installed my cruise control in Toyota Prius 2011 taking lead from your video. one suggestion please, that i routed the wire from L6 till L52 behind front pedestal instead of removing panels from front which seemed more secure and safe. The kit "Steering Wheel Cruise Control Switch 84632-34011 with Cover 45186-47030-C0" i ordered cost me PKR 3500 on Daraz and it worked very well.