Toyota Safety Sense ™ Automatic High Beams (AHB) Settings and Controls | Toyota

[@virvum_cypher]

How do I turn off AHB on a 2017 Corolla? There is no button for me to push and I absolutely loathe this feature. Let me choose when to turn on my high beams!

[@KC-rx5br]

I have a 2018 RAV4 the auto HB won’t light on my dash board. Need help

[@toyotausa]

Hi KC, thank you for you inquiry. To activate the Automatic High Beam System push the lever away from you with the headlight switch in the position. The Automatic High Beam indicator will come on when the headlights are turned on automatically to indicate that the system is active. Information can also be found in section 4-3 (Operating the lights and wipers) of the Owners Manual located in the glove box of your vehicle. We hope this helps. ^JR

[@m3photo726]

“ … with the headlight switch in the position”. The “position” they forgot to tell you about is AUTO, if it’s not turned to this setting it won’t work.

[@beranfrog]

I’ve checked my manual and it says nothing. There is no button to push, and I know my RAV has this feature as it worked automatically when I first got it.

[@sctony2000]

I have a 2017 Rav4 when I am turning into my driveway I need the high beams so I do not drive into the ditch. The system will not turn allow the high beams to turn on - for some reason it thinks there is a car in front of me. I want to turn off the Automatic feature.

[@thetechlibrarian]

Turn the headlights on manually. Then turn the high beams on

[@TheMcooper17]

I've encountered this at night. As far as I'm concerned it's the driver switching between high and low beam. I can see low beams a long way back. What was wrong with traditional h4 h7/h1 bulbs.

[@GAMEVIDSnorwegian422]

1:00, why make it so damn comlicated? Why not just make it as the EU models is... Push the stalk forward and the car does the rest itself. stupid that u have to press a button for ti to active and push the high beam stalk.

[@camptube7621]

The Gaming Norwegian I have a 2018 UK model. All you now have to do is set the lights to auto completely. Then just push high beam forward and the car does the rest. No more buttons.

[@JimmyMakingitwork]

If they didn't have a button to disable auto high beams people would leave comments about how stupid it is that it can't be disabled. Cuz. Internet.

[@carlosmontalvo372]

@@camptube7621 . , Tomas t train

[@virvum_cypher]

@@JimmyMakingitwork Looks like you predicted me. I loathe this feature and my 2017 Corolla doesn't have the button to turn it off.

[@ryanclayton5688]

I still miss the foot button on the floor for this, lol

[@jdbbs1]

Lol me too.. we’re aging ourselves 😀

[@MauriceandDonnie]

My Auto Hi Beam was working fine, Now it stays on Hi beam???? 2018 Sequoia

[@toyotausa]

Hello Maurice, feel free to contact us directly at [phone] (Monday-Friday 8am-8pm and Saturday 9am-7pm EST) to further discuss the automatic high beam concern you are experiencing with your Sequoia. Thank you for sharing with us. ^BP

[@MauriceandDonnie]

I took it to Toyota today, nothing was broken; it has two buttons for the headlights, one lower square button for the auto Hi-Beam which was switched off. The AUTO on the signal lever is only for turning on the lights automatically.

[@donew1thita11]

Same my car is stuck on high beam almost 80% of the time it's annoying

[@barbhaines2357]

How do I deactivate the cruise control assist that causes my car to slow down when I’m approaching a vehicle. I hate it so much. I want it permanently disabled.

[@m3photo726]

A long press on the cruise control button on the right of the steering wheel will turn it into standard cruise control.

[@neoxblack7611]

I'm definitely putting a piece of black tape over the sensor once I find it! I hate this so much.

[@Wilders53]

Why 25 mph?? If it's dark it's dark!!! Even at 10 mph yep still dark

[@JK-dv8yi]

THIS

[@pamelah7235]

Exactly. I’m looking for them deers

[@lynncheruiyot3790]

😂

[@swatteam3825]

This should implement long time ago, very hate those car with build in white beam.

[@joshakaoger69]

So in auto it's high beam... because I can pull the stick towards me and they get brighter I thought auto wasn't high beam 🤔

[@giaptheson]

At least 25 mph (40 km/h).

[@annikkihanninen6228]

Unfortunately AHB, in case of Toyota, is "unsafety" sense, and failure (could use also other words but would get censored). Camera/firmware/software is lacking badly. If I compare them to Volkswagen and Skoda AHB functionality, they score 98% correct decisions and Toyota maybe 45%. The problems are: - Switching to low beam too late when there is oncoming car - NO POSSIBILITY to adjust the functionality - If driving behind someone, not switching high beam on until the other car is miles away - If using auxiliary lights (must have because for example RAV4 plugin's (2023) own headlights are ridiculously bad, like 5 years behind others), then AHB does not really work. There is so much more light that the camera/firmware/software cannot make the decision, if there is oncoming car or not. One has to manually switch to low beam (no problem with Volkswagen or Skoda). - If anything else than clear weather, the above problems multiply by 3x

[@youtubenews645]

Auto highbeams is not the good

[@tacticaltrex6490]

I cant stand this feature... it does not work well, it looks like youre flashing the high-beams all the time, blinds cars pulling out of drives etc.... Toyota, no more electronic Nannies

[@user-zr6pl6nb6z]

Not only that, but mine keeps the high beams on when there are bright street lights that make high beams unnecessary. It only turns them off if another car is coming or it detects taillights ahead.

[@lebaokhang1766]

Toyota c - hr

[@shong6261]

My husband had Toyota Tacoma when we lived in Nashville but someone slammed in behind his truck total his truck

[@barbhaines2357]

Why would Toyota add these features. I hate them.