TP-Link ER605 OMADA Gigabit VPN Router | Unboxing, Multi-WAN Load Balancing Setup & Initial Review

[@SpliffyTV]

Yo. Check out my initial low cost network improvement: kzbin.info/www/bejne/bJa7c4F9bteakLs ER605 Aggregation and PPPoE: kzbin.info/www/bejne/b3e4cq1umc2rns0 HTB-3100 & HTB-GS-03 Media Converters: kzbin.info/www/bejne/mIaXiIZ9q5Whpas

[@shondorc3703]

Thank you for showing the automatic setup. Everyone else is making this way too technical for a novice. They show videos about changing addresses and pinging and stuff. I didn’t even know you could just let the router do it automatically. I will be setting mine up next weekend. Thanks for the great video.

[@kablammy7]

Excellent presentation and information . One of the few presenters who has ability to provide background music that is not intrusive and / or irritating . Well done . Thank you .

[@SpliffyTV]

Glad it was helpful!

[@BillyBobDingledorf]

I agree, but no background music would be even better.

[@aguyandhiscomputer]

​@@BillyBobDingledorf correct. This music gets annoying after only a few mins.

[@thekentmk]

Been using this since WFH setup started back in 2020 in Cebu and my it does its job well. A lot of features you can play around.

[@SpliffyTV]

:D

[@Gamepadder]

Setting up one of these for a Doctor office today, thanks for the video!

[@SpliffyTV]

That's great!

[@mav29]

nice, this is really great. great walk through sir, looking forward to the other mentioned features to be tackled

[@SpliffyTV]

Thanks, will do!

[@DreiEUS]

Sir ask ko lang bat yung wan/lan ko ung nagiging primary sa online detection kahit WAN nmn ung primary na nakasetup sa link backup?

[@uniqoiho8435]

do you have a video tutorial for OC200 (omada controller) hardware/software configuration?

[@OLDMANDOM42.Dominic]

Man, good music! I liked your rhythm it was slow and steady! Thanks!

[@SpliffyTV]

Thank you too!

[@1027scool]

Agree!

[@JoloNavarro]

Planning to purchase the ER605 soon and for the same use case, this video makes it easy to consider! Salamat sir!!

[@SpliffyTV]

Glad it was helpful!

[@vickymendoza132]

Sir pwede humingi ng link ng shop to order

[@CamposMIC]

Thanks a lot for the video. One question, with 2 isps, if I am gaming, if I loose one connection, will I not dropoff the game, even if it changes the IP addres of my connection?

[@temari6640]

Great video! I was looking for this kind of video for omada. It was presented well and eat to understand!

[@SpliffyTV]

Glad it was helpful!

[@kchimusaru]

Thank you. I have been looking for a good review on this. Great 👍

[@SpliffyTV]

Glad it was helpful!

[@ivancarlosti]

ER605 is a good solution for homes and smb that looks for ISP failover solution, but it only works for IPv4, the IPv6 implemented on this box does not failover at all

[@SpliffyTV]

thanks for the observation, It seems ipv6 of my ISP is for business lines only. Ill try checking on this at my workplace :)

[@alexmand8003]

Hey Spliffy great vid - in the WAN tab for my defualt gateway i do not see a private IP - i see my ISP public IP. Also should i be able to access my ISP modem admin page when in bridge mode with Omada router

[@bipinsaisr4373]

i have one doubt, i am using the same device if the lan cable remove it switching is working fine ,but my case lan 1 internet failover its not switching to backup ,should i change any particular setting to get the connection

[@raghvendraverma9691]

Thank you... Please let me know if all the 3 routers need to be on different ip range?

[@raghvendraverma9691]

I have 2 Routers with 192.168.0.1-255 series LAN and have done port forwarding on both the routers and I used to manually switch between routers when link was down now I decided to use tplink er605 for load balancing... How can I use the same ip range with the port forwarding from the routers? Or I have to change both routers ip range and do port forwarding on tplink er 605 and both the routers too?

[@chriszeref4029]

is it possible to connect a 2 output ? 1 for LAN desktop and 1 for a wifi router

[@SpliffyTV]

yes. just make sure other connected router will not conflict with this router's ip

[@hugabug516]

Very informative. Salamat bai! 😊 I got one and hooked up my Sky Fiber modem/router and Smart Prepaid Home WiFi as the backup. The Smart prepaid works fine, no issues. But the Skyworth modem/router of Sky Fiber is not stable. After initially connecting, the internet connectivy to the ER605 seems to get lost or blocked. But if I connect my laptop directly to the Skyworth modem/router, the connection is fast and stable. So there seems to be a problem with the connection between the Skyworth modem/router and the ER605. Any advice will be appreciated.

[@3liquidthree]

Hey @SpliffyTV, I was wondering at 16:46 you set up Primary and Secondary WAN. is Link Backup necessary for the Load Balancing to work? if you dont setup Link Backup, does that mean that the 2 WAN are used simultaneously? Thank you for any info you can give me. Great Video guide BTW.

[@ashelleeksdi4221]

meron ba itong bandwith control?

[@djhurtentertainment]

Thanks for this video tutorial. Instruction is very clear

[@SpliffyTV]

Glad it was helpful!

[@sakzprocyon1236]

But it does work if I connect on the main router

[@adialam8335]

I may use this, in particular nodes to boost-up their bandwidth speed. But would it generate different IP? ... Im afraid it would act like router rather than switch

[@SpliffyTV]

it will only aggregate or combine connections.

[@sakzprocyon1236]

Bro my er605 does not connect if I connect to a sub router what should I do?

[@SpliffyTV]

check the dhcp config on all routers, check for conflicts. you can make er605 do the dhcp and the subrouter as access point. the sub router's port should be set to LAN in er605 settings.

[@cherylldanechristian62]

i try to connect this router to omada SC, but its notice Too many PRECONFIGURED devices in this account. Available licenses are not enough, whats wrong?

[@SpliffyTV]

i think the free 10 licenses are only valid for 30 days :(

[@lhd7105]

Hey thank you so much for this simple mere-mortals-friendly introduction to setting up WAN fail-over on this device, I really appreciate it!!

[@I3ordo]

hello , i was wondering f this router can help with my case. I want my lo-tolerance p2p videogaming not affected by my videogame's stream output, so i have two lines coming in with VDSL, so this router i suppose will priotize my gaming UDP connection over anything ?

[@SpliffyTV]

you can control the bandwidth, yes, i think you can specify ips

[@craigpetty7038]

can remove the network switch I use to share internet with a use this by remove the switch will this still work?

[@SpliffyTV]

This is my setup: Isp router -> er605 -> switch/wifi router. Be sure to config the dhcp on every router for them not to be in conflict

[@mikejugo7630]

Hi! Is there a way for the Omada to notify the admin when a internet connection goes down?

[@SpliffyTV]

I haven't tried it, but I think you may be able to do it if you set it up with an Omada controller

[@ashigowda436]

Up to How many users does it support

[@toddmcmichael5505]

So failure of the primary will result in interruption in a zoom call or video streaming, due to this 20-30 sec delay in switchover? Any way to keep it seamless? Would a different product like this make it seamless without dropping zoom meetings?

[@SpliffyTV]

Have u tried updating? I still havent. Maybe itd fix the time to switch?

[@toddmcmichael5505]

@@SpliffyTV did not update it, but returned it and bought a used Peplink Balance One instead. I suppose you get what you pay for most times. The Peplink switch time is minimal and SpeedFusion works seamlessly.

[@lhd7105]

I don't think seamless in the hardware would help at all. Remember, once there's a fail-over, every website you visit will see that you are coming in from a different IP address. If these websites are nice, they'll let things be, if they are not--they are going to force you to do two-factor authentication all over again. So even if there was some way for the hardware to be seamless, the sites you access will raise [a reasonable] amount of fuss any how. But the pro is that you are indeed _back in business_. So there's that going for you. For things like streaming, you are probably okay, cus what's connecting your OBS streaming facility to Twitch/Kick/KZbin is probably a simple API key. So long as the key is provided upon request, you can resume the streaming. OBS probably does it automatically. For live streaming, you can make use of an "ingesting server" to help the cause: by having some server running on a VPS or something to help display a helpful "we'll be right back" template--that's probably all you can do to mitigate viewer confusion. Have your chat moderators explain to everyone that you'll be right back.

[@Capn_crunch69]

How do I set up basic set up so I can install my other router on this with my modem

[@SpliffyTV]

maybe ill make a new tut for this. for now, all you need to do is to plug the router in the LAN port. make sure you also disable the DHCP feature on your other router so that it wont conflict with the ER605.

[@Capn_crunch69]

@@SpliffyTV thank you

[@avocadomangos]

can i connect to the router 2 Ethernet cables from same ISP and use them as 2 WAN setup??

[@SpliffyTV]

i think it's only one ISP = one WAN. what are you trying to do?

[@avocadomangos]

@@SpliffyTV I thought if 2 cables are connected, it will combine the speed of both cables as one, event though it's from 1 ISP modem. My idea is to combine the speed of 2 sources at the same time.

[@SpliffyTV]

you can aggregate from two sources, see the pinned comment. but, it should be from two different isps

[@wilfredobarredo7776]

Hello sir @SpliffyTV question po. Does is really function load balancing? 18:15 >> Load Balancing >> Online Detection. WAN/LAN1 shows offline. Does it means only WAN works? Or baka po mali ako sir?

[@sanjuraj123]

Is dyanamic dns available in this?

[@prasaddhana9587]

how to do port forwarding?

[@TheFarmacySeedsNetwork]

Excellent walk through.. thank you! subbed! cheers! 🌱:dash: Happy early 420!

[@todortodorov676]

Thanks for the video. What are the maximum R/W speeds achievable by the tp-link? Thanks in advance!

[@SpliffyTV]

Gigabit speed is achievable if u have: This router + gibabit lan port in your computer + gigabit capable cables like cat 6 Or This router + gigabit wlan adapter in ur computer + gigabit wifi router + gigabit capable cable to connect ur wifi to this router. Max internet speed can be achieved if u have the setup above.

[@wizajit1]

very detailed and crisp clear explanation. kudos to u and ur team for the effort :) i had a small doubt, if you could answer. can i connect this to two of my omada eap 265 and if i connect a network printer to this directly; could printing work flawlessly over wifi devices connected to the omada access points?

[@marcotorres3424]

hello.. I have a TPlink TLr605 and configure it to block some internet pages and it works great for me. but now I would like to release those pages only for certain users, do you know how to do this? Thanks a lot!!

[@SpliffyTV]

i dont have my router right now. but i think u can, by filtering using mac address

[@JerichoPenalosa]

Hi will this work with units/workstations up to 140 plus?..

[@SpliffyTV]

not more than gigabit connection, yes.

[@7budfox]

thank you for this interesting video. My ISP router provides 2.5 gbit internet via 4 gigabit ports (max 1gb per port , but you can connect ports to different devices to get the full 2.5 gbits) . Would it make sense to connect two of such ports (and so a total bandwidth of 2 gbits internet) to this router and configure the load balance ? or would it be useless since the lan port of the router is 1g anyway?

[@SpliffyTV]

in theory, yes, that would be over the max capability of this router.

[@msivakumar3155]

How many users setup support this router ???

[@kaleemhere]

how do i configure PPPOE settings for each ISP Connection can you please let us know , many thanks dear

[@SpliffyTV]

check out the first part of this video kzbin.info/www/bejne/b3e4cq1umc2rns0

[@SamikBandyopadhyay]

I have two smart televisions at home. I want both of them to use one specific wan. How can I achieve that in ER-605?

[@SpliffyTV]

Use another wifi router or switch, plug it in lan port of er605. Then plug or connect your tvs to that wifi router or switch

[@stevenpokorny6991]

Can I use 2 smart isp ?

[@SpliffyTV]

for failover, yes.. for aggregation, you need both pppoe

[@jtabaygar667]

Problema ko, pagconnect ng Lan to router hindi nakakapagbigay ng internet sa router

[@tomaspecha4371]

Is this possible to further connect to WiFi router?

[@Healcraft]

ideally you would set up wifi routers as access points, basically the same as far as setting up SSID, but disables routing / dhcp. So yes, connect them to any LAN port or connect LAN port to a switch first then AP (if you need more LAN ports on the router)

[@ekite15]

Hi, thanks for the video. I have the er605 VPN router and I am trying to connect wirelessly to Wi-Fi, but it isn't possible. is there a way to connect it to my Netgear router and have it work?

[@SpliffyTV]

Yes, you can. connect your WIFI router/access point to any of the LAN configured ports, connect your ISP router to your WAN configured port, and that's it.

[@bobla441]

Why does it take 30 seconds for the failover to take affect

[@SpliffyTV]

I wish i knew. Maybe it will improve on the latest firmware? I still havent updated yet.

[@boyscout-p3u]

meron ka ma recomend na 1gbps ang speed kasi 100mbps yata yan

[@kaicoffeephilippines]

IN this setup, who gives the IP address?

[@RalphRoyeca]

Many thanks sir, very informative video

[@SpliffyTV]

Most welcome

[@mamoutoubouare7542]

hi can you give me How to block mobile apps using tp link omada vpn router | Block any app or website on TP-LINK ER605

[@SpliffyTV]

noted bro. :)

[@mamoutoubouare7542]

@@SpliffyTV OK, thanks

[@deehive]

sa video, wan was unplugged. in real scenario, it will be isp that will be down sa WaN is still active. will it detect that isp is really down?

[@SpliffyTV]

yes. in my experience with my home fiber, I always get LOS / blinking red light when my ISP has problems. I have no idea if it detects user misconfiguration, especially with wrongly inputted PPPoE user/password... but it probably will since Port Status in Online Detection Tab works really well :)

[@juliusbergonia383]

Hi @@SpliffyTV, thanks for the video. just to clarify, the WAN failover works even when there is no internet connection in the primary wan interface? no need to unplug the cable to failover to backup wan? thanks!!!

[@SpliffyTV]

@@juliusbergonia383 yes

[@hyper6910]

thks for sharing

[@SpliffyTV]

My pleasure

[@jithenderreddy2450]

Is it possible both ISP online at a Time?

[@SpliffyTV]

you can check this out kzbin.info/www/bejne/b3e4cq1umc2rns0

[@subicbay895]

Hello Sir, I have 3 portable SMART wifi routers, 2 LTE and 1 5G. Will this also work? We're using it for our remote live streaming activities. I am actually aiming for 2 things = 1st is to aggregate all 3 internet sources for a faster upload speed and 2nd is to have a fail-over system in place. Thank you in advance

[@SpliffyTV]

it will work as load balancer using portable mobile routers. aggregation on the other hand, as long as you can get the pppoe information. i have a guide for that in the pinned comment. sadly, i didnt get mine from globe. :(

[@lhd7105]

Do you have a van to power this ER605 for your remote live streaming? Or would you need some hypothetical variant of ER605 that's actually battery-powered? I assume you mean "remote life streaming" as in "In real life streaming", please correct me if I am wrong.

[@khuntra6848]

Can this product really improve your internet speed with the dual internet provider or just help with balancing?

[@SpliffyTV]

hi :) internet speed is the speed you paid your ISP, it can only improve if you upgrade your plan. what this does is it can swap automatically from multiple ISPs if one of them fails, giving you undisturbed internet access. if what you mean by improve is if it can be used to aggregate (combine) different ISPs, then yes. you got to have the PPPoE pwds from those ISPs. im on my way of making a tutorial about it. im currently have so much on my hand right now. maybe soon :(

[@slavetonone3635]

​@@SpliffyTV Did you ever get a chance to make a video on this? Ty!

[@SpliffyTV]

@@slavetonone3635 for aggregation, please see the pinned comment.

[@eboi0487]

Sir ask lang, pwede ba magsabay online ang smart at globe connections para mapalakas ang DL UL speed? Or isa lang ma online at backup lng ang isa? Anyway very good presentation and step by step tut..

[@SpliffyTV]

salamat bro. check mo ang first part ng pppoe vid ko for er605. too bad hindi na binibigay ni globe ang password sa fiber nila. kzbin.info/www/bejne/b3e4cq1umc2rns0

[@eboi0487]

@@SpliffyTV ok ty.. May nakita ako vid, pwede pala sabay wag lang e set primary , hayaan lang, pwede pala kahit 3 isp sabay2x..

[@SpliffyTV]

@@eboi0487 nice. Try ko if makauwi ako

[@linoemmanuels]

I have 300mbps PLDT internet. Using speedtest by google,fast,ookla, it can achieve up to 300mbps. however, if Im downloading files, it can go to only 10MB/s which is equivalent to only 80mbps. when im connected directly to PLDT modem, no problem i can have 27MB/s download. do you also notice using this router? i use standalone and omada controller but same behavior.

[@SpliffyTV]

are you connected using the LAN port of er605 to your unit directly?

[@linoemmanuels]

@@SpliffyTV yes i do

[@SpliffyTV]

im assuming you're using the same LAN cable right? what exactly are you downloading? torrent? ftp? browser? multiple files/single file? what size of the file/files? just curious. there are so many factors to consider.

[@linoemmanuels]

@@SpliffyTV yes im using same lan cable. im downloading video card driver from nvidia website directly as a sample download file test. when using pldt, 27MB/s. when using tp link router er605,it can only do 10MB/s. however if im downloading games using Steam, er605 can do 27MB/s.

[@SpliffyTV]

@@linoemmanuels that's weird. can you try changing your DNS. use 8.8.8.8 and 8.8.4.4

[@CancelOkay]

Sir question. Have you tried upgrading the firmware? If so. Yung failover much faster ba? Planning to have one and wanted to smooth transition connection sa failover in the middle sa video chat. Thank you.

[@SpliffyTV]

Not yet bro. I still have a pending video about the other features but im still super bz at my day job and backyard farm. I wanna make the video using the vanilla version. Just read the changes they made with the updated version and find out if the transition is improved. My personal policy with firmware update is that i dont usually update if there are only minimal changes to the features or if i dont see any use of the features. (Some updates are more beneficial to the company who makes it than the users who use it.) 😅

[@epoylawliet0]

@@SpliffyTV naka connect po ang globe and pldt ko sa er605 but the speed hindi po nag combine paano po ba ma combine ang speed ng dalawang isp gamit ang tp-link er605, Salamat po

[@SpliffyTV]

need mo pppoe login para mag aggregate. ask your isp

[@CancelOkay]

@@SpliffyTV Thank you sir. You made my buying decision more eazy.... I tested the device for a week na. Sulit na sulit I don't need to uplug just to switch to backup now. Nakaka inlove si TPLink hahaha

[@epoylawliet0]

@@SpliffyTV paano po yung setup niya sa tp-link er605?

[@lenoilyor5973]

me also trying to use dual isp setup 😂🎉

[@glenncalinog2873]

sir pwede ba e remote si ER605. plano ko mag setup sa province. salamat

[@SpliffyTV]

havent tried but i think u need to setup an omada software controller, or use this as controller mode. or... you can use team viewer or remote desktop para madali.

[@mariasoccoromanansala6771]

Hi. Can i use this po if i only use 1 ISP but, there are three separate router from the main source? Btw, im using PLDT home fibr. I wonder if I Can use this to manage or control the bandwidths that will go to two other routers po. Thank you!

[@SpliffyTV]

Yes, you can... :D you can have a custom login (you can leave the wifi passphrase open, but with custom user/password on browser to access the internet/lan) if users want to connect to the wifi and control each device's bandwidth per ip/ip range/per device. i have a pending video for this.. hehehe

[@kimbao164]

Can you have multiple ip for one wan ?

[@SpliffyTV]

public ip?

[@kimbao164]

@@SpliffyTV yes I want the one that has username and password for ip, is it possible?

[@Foryaaaa834]

Can I use this for gaming lag switching?

[@SpliffyTV]

if your isp is unstable, probably yes.

[@djmango128]

Hello Spliffy TV, I have connected 2 WAN, Globe and Converge but the Converge is a static IP. The Globe is Dynamic. It shows that both are connected but switching to converge, does not give me connection. Is it possible to connect a dynamic and static Wan? or this only works with both are dynamic?

[@SpliffyTV]

yes as long as the ip is correct. can you try dynamic with converge? dont plug globe yet.

[@TheProjectOverload]

Great video - This helped me setup my ER605. Thank you.

[@SpliffyTV]

Great to hear!

[@dogymal7260]

how to use 2 wan concurrently

[@lucavozzolo4507]

Can this be used on a ps5?

[@SpliffyTV]

for fail-safe connection? yes

[@teacherj-tech2933]

Good day bro. Pwedi raba ni for example 4 ISPs 2Globe, 1from DICT, and 1 PLDT? Di ba mag conflict ang mga IP addresses? Thanks broo

[@SpliffyTV]

Yes na yes po bro.

[@teacherj-tech2933]

@@SpliffyTV magkano kaya tong balancer bro?

[@SpliffyTV]

@@teacherj-tech2933 nasa description po yung product link

[@NasirKhan-fy7ic]

what is the default password and username for TL-ER605, PLEASE SHARE!!

[@SpliffyTV]

i dont think it has one. from factory or from a hardware reset, it prompts you to make your username/password. you can reset it using my guide in the video. :D

[@aguyandhiscomputer]

Please stop using music.

[@LinTechtv9337]

How about the pppoe function

[@SpliffyTV]

sad news bro. globe wont give the pppoe password to home fiber users anymore :(

[@LinTechtv9337]

@@SpliffyTV i mean po! Pwede bang mag create ng pppoe account si tp link papunta sa client?

[@SpliffyTV]

you can input the one provided ng isp mo para ma combine or aggregate dalawang connections para ma double ang speed ng internet. ang isp ang nagbibigay ng pppoe.

[@jLO7422]

@@LinTechtv9337 use mikrotik

[@FingerPanic]

Thanks brother!

[@SpliffyTV]

:)

[@sarbjitsingh4341]

Wow Great video

[@SpliffyTV]

Thanks for the visit

[@johnbellebenaning1666]

Can we have channel bonding video please?

[@SpliffyTV]

this has been a road block ever since I made this video. my Globe ISP is very hard to contact regarding my PPPoE account (only automated digital support, rude customer service, takes one day to line up and ask for it in their physical store, pandemic limitations). But this is one of my priorities.

[@johnbellebenaning1666]

@@SpliffyTV I am looking forward to this. I know some are too!

[@marcelius8649]

Is it seamless?

[@SpliffyTV]

it would take a few seconds (see vid)

[@boymukbang5383]

Dapat combined ang speed

[@Foryaaaa834]

Mine not connected

[@SpliffyTV]

what did you do?

[@kadiaz45]

Will this work with nord vpn?

[@SpliffyTV]

nord discontinued L2TP/IPsec and PPTP protocols in 2018. no clue since I don't have a nord account yet.

[@akoayisangogag]

13:04 I can tell that you have a dog based on the fibers on your ethernet cable.

[@SpliffyTV]

it's so sad I have to keep them away from my room these days. it's really hard to keep up with the cleaning. :D

[@akoayisangogag]

Don't worry. I have those too. Cat fibers too.

[@Ut-s3u]

salamat po

[@eprohoda]

‘sup?-berathtaking video!amigo- 🙃

[@SpliffyTV]

yo... thanks... =)

[@stephenpak6622]

WAN B WAN Bonding?

[@SpliffyTV]

you need pppoe from isp

[@boymukbang5383]

Multiwan nga pero isa ang gumagana dapat maging duble ang speed

[@SpliffyTV]

im still trying to contact globe po. need po kasi pppoe pass para mag aggregate. :( napakahirap contakin kahit personal account ko pa.

[@joreal71]

40mbs only in PH. Telco ripping off Filipinos by charging more but giving less speed. If no third telco, they wont upgrade their system. The cost of home internet in the Philippines is almost the same in our place but there is totally slow. Normal speed for landline in our place is 700 to ~1000 mbps. Can go ~2000mbs if you upgrade higher.

[@SpliffyTV]

hey bro, thanks for the visit. yes... philippine ISPs are totally behind compared to other countries. my Globe Telco actually upgraded my account without me knowing. lol, and i just found out about it when doing this video kzbin.info/www/bejne/mIaXiIZ9q5Whpas... i have 150mbps now, can go higher sometimes. but also throttles down on some occasions. my bandwidth can handle all my IoT devices including my smart TVs and gadgets so i dont have issues for now. the only gripe i have is that the ISPs support centers here are very hard to contact and can waste your time if you want to go to their physical store.

[@depede384]

don't put the cable. just disable the internet on the router and see fail over.

[@omkartanpure270]

i see double nat

[@SolidSnakeAce]

Too damn slow to boot up :-( I had to replace it with Asus router with dual wan

[@SpliffyTV]

that's true bro. what's the name of your asus router?

[@SolidSnakeAce]

@@SpliffyTV Asus RT AC68U V3, seems much reliable for me but not cheap unlike TPLINK ER605. TPLink is bang for buck if boot time is not an issue

[@SpliffyTV]

@@SolidSnakeAce thanks... way too much for my budget. T_T but with the fast boot time and wifi capabilities, it's worth looking into.

[@stevenharris9941]

it L E D ( ELL EEEE DEEE) NOT LEAD !!!

[@ivaldez5715]

It's not it (iiitttssss) !!!

[@reklamador27]

It sucks to know This omada can't handle 500+ mbps connection.😂

[@skywatcherca]

God bless President Trump and Israel.