TP-Link Omada WiFi 6 Access Points, Business WiFi Lineup

Checking out the line-up of TP-Link Omada Wifi 6 access points. Use coupon code 12CROSS for 12% off Omada AP's using the links below!
Product Links (affiliate):
Use Coupon Code 12CROSS at checkout for 12% off! (2/24/2022 through 4/24/2022)
EAP660HD (AX3600 Wireless Dual Band Multi-Gigabit Ceiling Mount Access Point)
Use code 12CROSS at geni.us/jTANm
EAP610 (AX1800 Wireless Dual Band Ceiling Mount Access Point)
Use code 12CROSS at geni.us/N0238
EAP615-Wall (AX1800 Wall Plate WiFi 6 Access Point)
Use code 12CROSS at geni.us/ZTuiMx
EAP225-Outdoor (AC1200 Wireless MU-MIMO Gigabit Indoor/Outdoor Access Point)
Use code 12CROSS at geni.us/YaoU
-------------------------------------
Buy me a beer! ko-fi.com/crosstalk
Or donate some Crypto! crosstalksolutions.com/contact/
Follow me on Twitter: @crosstalksol
Crosstalk Solutions - RECOMMENDED PRODUCTS: crosstalksolutions.com/recomm...
Crosstalk Discord: / discord
Amazon Wish List: a.co/7dRXc67
Crosstalk Solutions offers best practice phone systems and network/wireless infrastructure design/deployment. Visit CrosstalkSolutions.com for details.
Connect with Chris:
Twitter: @CrosstalkSol
LinkedIn: goo.gl/j2Ucgg
KZbin: goo.gl/g4G58M

[@zbcochran1]

Loving the new non-ubiquiti videos coming out!

[@d00dEEE]

It's spelled "mu-mimo" but it's pronounced "throatwarbler mangrove." I've had an EAP620 HD in our house for about six months now, and it installed and works without any issue. Coverage from the front sidewalk to the rear deck is excellent on the 5G band, and I have no idea how far my 2.4G signal goes.

[@davinadavina1331]

i have an EAP650 indoors A/Point. how do i increace the wifi strength. its only 25dbm.

[@lucifersloofa]

I'm going to get 6 of those in wall aps for my new house. I will wait for the slimline units coming before getting a ceiling mount

[@GamingFruguy]

Design is the only bad part of those indoor APs. I'd have to put them above the ceiling rather than on the ceiling.

[@user-fi3hb2de1q]

我把他们放在电视柜上，信号会比挂在天花板上弱一点

[@techmaster170]

I've been using an eap660hd at home and its been absolutely amazing compared to the ap built into my isp provided device.

[@littlebit670]

I don’t have the Omada commercial system, but I do use their Deco consumer mesh system and even though there is no traditional backend it’s still a great router. We have the XE75Pro, a WiFi 6E system.

[@Noodles.FreeUkraine]

Those gadgets certainly have the lowest WAF of anything this side of Andromeda.

[@maxbroomfield5392]

I’ll one up the lowest WAF score ever… 48u rack with Server fans at 100% Edit: Either in the living room or bedroom…

[@connclissmann6514]

Seems a lot more reasonable in cost to Ubiquiti, especially in the SME / home market.

[@ronm6585]

Thank you.

[@Th3DarkCanuck]

Damn, those are HUGE!

[@futurecactus]

I really like TP Link and I install a lot of Deco units for domestic use but come on, those APs are still too ugly to put into someone's home, it's stupid to fall at that hurdle. my-mo BTW

[@theBullringLive]

Do you have any vids for setting up the eap225 for mesh. Looking to setup 3 for a racetrack

[@traumagas123]

Whats the Difference in This and Ubiquity ? & Is it easier to Set up ? the outdoor Unit looks Like A Uniquiti Unit

[@tornadotj2059]

TP-Link, they are at least consistent. Their ceiling mount APs are giant, and not only did they rip off the Unifi controller, but that outdoor AP is a direct knock-off of the UAP-AC-M, all the way down to being 48v/24v compatible!

[@dwazeke]

That was my first reaction: these things are enormous

[@realAlexRodriguez]

I for one am very happy to see these, healthy competition will only make both TP and UI step up and deliver better products for us the consumers. I do hate the fact that they are clearly UI knockoffs - at least at this point. I did checkout your merchandise store but did not find your the "I Like DNS" t-shirt, can you post a link to it?

[@issa570]

Hello,is there outdoor access point that can transmit signals in almost 1km in 2.4ghz and how many clients can be connected on this equipment?

[@garzdiva]

Oh dear god, people kept saying how big the AX APs are compared to the old ones, and I didn't think they were this big.

[@theSoz]

Geez…that thing is huge!

[@Claudej3D]

I bought from Amazon a TP-Link Omada outdoor. The configuration I want is different from the one in the installation guide. I'm at a camping ground and the signal inside my VR is really weak. I want to put the TP-Link outside the RV connected via an Ethernet cable to the inside of the van, where the Poe injector and router are. Is that configuration possible ?

[@jpmo82]

great video and great products, but eap225 outdoor have very poor coverage, around 80 feet, any solution? thanks.

[@RayneYoruka]

Been using for like 4-5 months one of this archer X series with "semi" wifi 6 (1200mbps) and I've been looking Omada as an alternative to UNIFy and I'm really hyping that they're releasing Wifi 6 products!

[@Gamex996]

can you open them, I mean disassmble them, they are too big I will put them in enclosed area so I am thinking of putting them with just the bottom part

[@HoleLeashIt]

Non TPlink question, but may be relevant to others as well: I have a NanoHD (4x4 but only wifi 5), and a U6 lite (wifi 6, but only 2x2). Which one should I put in the more dense area of the house?

[@Daniel-nm9rm]

HD = high density

[@HoleLeashIt]

@@Daniel-nm9rm I get that it says in the name, but wifi 6 is supposed to be better with multiple users I guess due to OFDMA so it isn’t very clear to me if 2x2 vs 4x4 matters in that situation

[@bothorsen4292]

U6 lite. Every test that's done shows a much better bandwidth with the U6 lite over any of the old wifi 5 APs. The 2x2 MIMO in the lite can saturate the 1gbit line, so the nanoHD has no advantage over it. Also, a house is *never* a dense area, so 2x2 is not a problem

[@brianwalsh1844]

I am putting in Omada to service 14 users with Smart phones, laptops and IP phones - total count is 45 wireless devices - three main areas - any suggestions on what access points to use and how many?

[@glendonh3711]

Continuing to save money on tooling with those huge housings is actually hurting the company by leaving so much potential customers money on the table. Being tone def to this fact, also has me questioning what a customer support experience would be like. Personally would love to give them a go based on price to performance, but really not sure how much that size would ultimately bug me.

The 610 has a V2 which is way smaller, but it's hard to find yet.

[@pcprotechjason]

Why did they have to make these look like giant home smoke detectors

[@solera2008]

Mimo. The second option. 🙂

[@ElmerShox]

i Have an OMADA OC200 v1.0 its very hot.. are you running yours very hot? via POE power.

[@Fenweekoh01]

damn their huge, as a home user that has a veeeeery allowing spouse, i would not even put this up as a option to replace the ubiquity AP we have. wife approval factor 1/10

[@johnpoldo8817]

I have found TP-link much easier to configure and support than Ubnt.

[@MyAeroMove]

Any details how it handles channel selection/DFS/etc? If I'm not mistaken it was very limited before with these kind of settings

[@anthonydiiorio]

Tomato Tomimo

[@bobbytaylor3177]

Chris, I realize this is outside the scope of this video, but would you recommend someone get the UDM Pro or UDM SE

[@jasonluong3862]

It’s inexcusable to have the APs so big. They are an eyesore.

[@rickk10000]

The EAP610-0utdoor has been promised since January of 2021. It is still imaginary. WiFi-6E will be rolled out by other vendors before TP gets their act together. They really missed the boat on this one.

[@justincase3880]

TP-Link Omada APs and PoE switches generate PoE RFI .. I’m a Ham Radio operator, and found RFI from TP-Link PoE interference at specific frequencies on several bands …

[@balkin33]

lol I say MEEMO

[@DJaquithFL]

TP lost me by even thinking of hanging those car tires on the ceiling. Maybe in a warehouse.

[@BrianMelancon]

From what I understand, they're mostly empty space. They need to cut the size by at least 1/2, especially depth. I've got ceiling fan motors that aren't much bigger.

[@DJaquithFL]

@@BrianMelancon .. Yeah, I don't know what they were thinking. If they were smaller and in line with Ubiquiti I'd be seriously interested in these APs. In an industrial place no problem.

[@sycal13]

@@DJaquithFL here is the answer to your question. maybe it will help. I ran across this the other day. kzbin.info/www/bejne/eISkZKmkr9ulmtk

[@DJaquithFL]

@@sycal13 .. Sure TP saved a bunch on tooling costs but they lost a hell of a lot more on people not buying it. There's no way I'm hanging that thing inside my house or office. People in my office would think they're being microwaved to death and my wife would do a lot worse bringing it in her home, I mean our home, you know what I mean!

[@sycal13]

@@DJaquithFL oh I understand. I thought of using TP-Link Omada equipment but, that AP is huge. I'll just stick with Unifi and wait for equipment to come back into stock.

[@TheSpanishmuscle]

Man those things look B I G

[@donaldhiggs2075]

me-moe

[@JamesHaitch]

Chris, please remember that wired gigabit Ethernet can have a total throughput of 2Gbp as they're full duplex. WiFi is half duplex.

[@MitchOfCanada]

EAP610 Could totally just use 12v line like security cameras. with breakout cat5/12v dc separator.

[@maxbroomfield5392]

or just use PoE

[@MitchOfCanada]

@@maxbroomfield5392 remote installations, mobile, rv use etc, may not have POE or 12-24 step up converter. I use 12v stuff all time and then use 24v converter for POE to power stuff in the field. without 120v AC.

[@mikebroom1866]

Agreed, their APs are decent for the price, but their SDN is AWFUL

[@Newtworks7]

Man those access points are ugly!

[@yvesnomagnon8585]

Ubiquiti and MikroTik, the Best

[@sheffieldhoney]

Wank product, returned and moved to UDM

[@Lyunpaw]

First

[@yvesnomagnon8585]

Tp link fake products

[@michaelcortez7274]

second.

[@Obelixlxxvi]

Cheap knock offs.

[@spierdlajify]

I still trust more Ubiquity like UniFi 6 Lite Access Point