TP-Link Router Setup and Full Configuration

TP-Link router setup step by step tutorial. TP-Link router setup and full configuration. TP-Link router configuration easy method. How to setup your tp-link router step by step tutorial. If you want to setup your tp-link router, this video is for you.
How To Setup TP-Link Router-
01. Connect the Ethernet cable from your internet service provider to the "WAN" or "Internet" port on the back of the TP-Link Wi-Fi Router.
02. Connect one end of the included power adapter to the device and plug the other end into a wall outlet nearby. Then power on your TP-Link Wireless Router.
03. If you want to reset and Setup your TP-Link Router. When your TP-Link Router is powered on. Press and hold the WPS/RESET button (more than 10 seconds) until the system LED becomes quick-flash from slow-flash. Then release the button and wait for the router to reboot to its factory default settings.
04. Connect your phone or computer to the TP-Link router using an Ethernet cable or Wi-Fi. The default network name and password are usually on a sticker at the bottom of the TP-Link Router.
05. Once your phone or computer is connected to the TP-Link Router. Open a web browser, and type tplinkwifi.net. in the address field, press enters to visit the TP-Link router’s web management page.
06. For security, please create a Login password for management. First, type your new login password. Then confirm your login password.
07. Then, click on Start.
08. Run the Quick Setup to manually configure your internet connection and wireless settings. To continue Setup your TP-Link Router, please click the Next button.
09. Select your local time zone from this pull down list. Then click the Next button to continue your TP-Link Router Setup.
10. Choose Operation Mode: Wireless Router. Then click on the Next button to continue your TP-Link Router Setup.
11. Choose WAN Connection Type: Dynamic IP, Static IP, PPPoE, L2TP, PPTP (You can ask your Internet Service Provider about your internet connection and the required details). Then click the Next button to continue your TP-Link Router Setup.
12. Please Enter your PPPoE username and password given by your internet service provider. First, type Your PPPOE Username. Then, type Your PPPoE password. Confirm your PPPoE password. Then click the Next button to continue TP-Link Router Setup.
13. Confirm or change the TP-Link router wireless network name. Enter the name (SSID) for your wireless network in the given field.
14. Ensure to select the correct country for your current region to confirm with local laws. Incorrect settings may cause interference.
15. Set a password to secure your wireless network. Enter the password you have chosen in the box next to the password. Wireless or Wi-Fi passwords must contain at least 8 characters. Then click the Next button to continue your TP-Link Router Setup.
16. The Quick Setup is complete. Please confirm all parameters below. Click BACK to modify any settings for click SAVE to save and apply your configurations.
17. Click the Save button to finish the TP-Link Router Setup and Configuration.
TP-Link Router-Related Videos:
TP-Link Archer C20 Router Setup: • TP-Link Archer C20 Set...
TP-Link Archer C60 Router Setup: • TP-Link Archer C60 Set...
TP-Link TL-WR850N Router Setup: • Tp-Link TL-WR850N 300M...
TP-Link TL-WR841N Router Setup: • TP-Link TL-WR841N Setu...
SOCIAL
===============================
Blog: www.wifiremon.com
Facebook Page: / wifiremon
Twitter: / wifiremon
Instagram: / wifiremon
LinkedIn: www.linkedin.com/in/wifiremon
#tplink
#tplinkrouter
#tplinkroutersetup
#tplinksetup
#wifiremon

[@loophole3763]

saved this video, using this from now on, your way of explaining things was incredibly helpful

[@WiFiRemon]

Glad it helped!

[@waqasmohammed3337]

I admire your tutorials by giving complete steps. Cool. Thanks

[@WiFiRemon]

You are welcome!

[@hxn863]

You just earned a new subscriber. Thank you so much❤

[@WiFiRemon]

Welcome!

[@Aydam08]

Finally an understandable video. Too bad I forgot my TP-Link password lol

[@mistyjannat8291]

This is a very quick tutorial 👏👏💯💯💯

[@WiFiRemon]

Glad it was helpful!

[@zahraahmadi4586]

It seems like a good router, I think I will buy it

[@WiFiRemon]

Yes You Can

[@jamestanaka5400]

This is a very quick tutorial and yet very detailed.

[@WiFiRemon]

Thanks for watching!

[@lizaridhi6254]

I just want this kind of video 😍

[@WiFiRemon]

Thanks for watching!

[@Fv.r4sh]

When I click the last next button my wifi automatically disconnect. Please help

[@user-pd3sq9du6s]

Thanks for your very clear and precise tutorials.

[@WiFiRemon]

You are welcome!

[@anty2235]

I love this video bcz it's help me

[@WiFiRemon]

Thanks for watching!

[@Jimmy-mf7xw]

Thanks for sharing this content.

[@WiFiRemon]

Our pleasure!

[@jamalsikder3310]

Important information... Thank you so much bro👏👏

[@WiFiRemon]

Welcome 😊

[@chompamoni6786]

Very informative and helpful video. Thanks for this video

[@WiFiRemon]

So nice of you

[@sractbar7863]

It's help to know more about router

[@WiFiRemon]

Thanks

[@ariyanislam8530]

this video is very helpful

[@WiFiRemon]

Glad you think so!

[@bean3155]

Its very helpful for me

[@WiFiRemon]

Happy to help

[@Brightfutureacademy736]

Thanks, it was really useful.

[@WiFiRemon]

You're welcome!

[@KenyaMoja98]

Wonderful,,i just configured one

[@mantasamow7400]

Thanks for this information 💯💯👏

[@WiFiRemon]

Any time!

[@sadanil5630]

Very good information 🙂

[@WiFiRemon]

So nice of you

[@purplelove4775]

Very Helpful content.

[@WiFiRemon]

Glad it was helpful!

[@tanujiisultana1673]

Good information 👍 👌

[@WiFiRemon]

So nice of you

[@ranira8715]

Very important vedio

[@WiFiRemon]

So nice of you

[@megha2058]

Very helpful video

[@WiFiRemon]

Glad it was helpful!

[@rafiqiridhi1089]

I just love this video

[@WiFiRemon]

Thanks for watching!

[@jannatulsinthia5199]

Very useful video

[@WiFiRemon]

Thanks a lot

[@tanvirahmed6001]

Very helpful vedio

[@WiFiRemon]

Thanks a lot

[@mahishajannat669]

Thanks for sharing vedio

[@WiFiRemon]

Most welcome

[@fulmoti6197]

Wonderful vedio

[@WiFiRemon]

Thanks for watching!

[@fatemarisha5471]

Nice information 🙂

[@WiFiRemon]

Thanks 🙂

[@anushaislam8486]

Very nice👏👏

[@WiFiRemon]

Thank you very much

[@dhaneshpt8641]

Thank you

[@WiFiRemon]

You're Welcome.

[@nasrinahmed9666]

Nice information

[@WiFiRemon]

Thanks

[@rumanaakter6772]

Ameging vedio

[@WiFiRemon]

Thanks

[@mekhamoni8838]

Helpful video

[@WiFiRemon]

Thanks

[@yanoortara8425]

Helpful video🥰🥰

[@WiFiRemon]

Glad you think so!

[@ehchkgchj4538]

great job

[@WiFiRemon]

Thanks

[@emaakter1193]

Good job

[@WiFiRemon]

Thanks

[@gdghxhj6833]

thanks for sharing

[@WiFiRemon]

Thanks for watching!

[@junusenivlogs]

Thanks

[@WiFiRemon]

Welcome

[@giftcardstore.]

Helpful video ☺️

[@WiFiRemon]

Glad it was helpful!

[@djfyuhkd2525]

good job

[@WiFiRemon]

Thanks

[@alishaakter4923]

Good vedio

[@WiFiRemon]

Thanks

[@ashaakter664]

excellent work

[@WiFiRemon]

Thanks for the visit

[@hrshikesh2932]

I followed the same instructions (but the website looked slightly different maybe it was updated) But after the last step where we need to confirm and save, after this step it shows i don't have internet connection. What do I do ? I tried multiple times and everytime I get that msg Btw when my router has orange light/sometimes no light (innternet led) after reset. I watched so many video but yours felt the most simple and straight to the point but still i couldn't configure it pls help

[@Rima-cj9um]

Nice vedio

[@WiFiRemon]

Thanks for watching!

[@yar-mamamuhammad8296]

Can I use my Airtel CPE2000(4G BROADBAND ROUTER) to replace ISP and connect my TP-links (TL-WR845N,300Mbps wireless N router) ? And If I do speedtest ,Is it Airtel that will show or my tp-libks?

[@Speed72_]

Do i need to connect a ethernet cable to the main router?

[@fahmidafahmida6419]

Great

[@WiFiRemon]

Thanks

[@hdfgsg651]

love this

[@WiFiRemon]

Thanks for watching!

[@iexiex97]

Hello Wifi Remon, How to connect TP-Link AC1900 Smart WiFi Router (Archer A9) to spectrum SAC2V2S main router wirelessly? If you could help, really appreciated.

[@afsanaakter5413]

nice

[@WiFiRemon]

Thanks

[@SonicWilliamX]

Is repeater mode can connect the Internet without the wire?

[@WiFiRemon]

Yes, of course.

[@elijahnakamura8471]

When there is tp-link, will it affect the signal strength of the main provider?

[@WiFiRemon]

Yes

[@kidd1941]

Hello please I don’t have internet connection

[@MrLucas-or8qo]

I want to know if it has a bandwidth management?

[@WiFiRemon]

Yes

[@yordanmilchev]

Hmm can't reach this page

[@zeinabfaheem2303]

Sir does dis router have bandwidth control in da settings?

[@WiFiRemon]

Yes

[@russiadmitriy5307]

What do u prefer the most? Wired or wireless?

[@WiFiRemon]

Wired

[@MrAnand-fb1se]

How can I connect Ethernet port from Tp Link routor other end where can I connect because in my laptop It don't have ethernet port. Where can I connect the ethernet port to Another end.?

[@WiFiRemon]

Hi, Mr Anand. Thanks for your valuable comments. What to Do if Your Laptop Doesn't Have an Ethernet Port? If your laptop doesn't have an Ethernet port and you want to connect it to the Internet, here are some possible solutions: Buy a USB to Ethernet adapter to connect your laptop to the Internet via an Ethernet cable. Use Wi-Fi to connect to a Wi-Fi router.

[@MrAnand-fb1se]

@@WiFiRemon if always It should be connected ethernet port to laptop or Can I remove after wireless Wifi connetion..?

[@WiFiRemon]

Mr. Anand. When you connect your laptop to your router bits Ethernet, the operating system should detect this and disable the wireless connection. If it does not then yes you are still connected, this can be demonstrated by pulling out the cable and if you are still connected to the internet then the wireless is still working. There is no harm in using laptops in this way. There are two main benefits to using Ethernet 1) The connection is more stable because of less chance of interference and 2) It's more secure as no one can hack your Wi-Fi if you're not connected to it.

[@virtualjoker9036]

Everytime I keep getting Unsupported browser?

[@fjcvjjfhh9688]

wow

[@WiFiRemon]

Thanks for watching!

[@godrockyyt3170]

Dual band router ar ki 2 ta signal 2.4g and 5g ?

[@WiFiRemon]

Yes

[@alifalif6208]

didn’t find Bangladesh region

[@HLOKS_GOAT]

So if your house does not have a phone jack then it won't work?

[@mdshahidulislam05]

Time zone ki dite hoy

[@WiFiRemon]

(GMT+06:00) for Bangladesh

[@mdshahidulislam05]

@@WiFiRemon apnar sathe contact kora Jabe ki..

[@yar-mamamuhammad8296]

@wifi-Remon

[@beautybeast3253]

Thanks for sharing this content.

[@WiFiRemon]

Our pleasure!

[@mekhamoni8838]

Thanks

[@WiFiRemon]

Welcome