TPMS Sensor Deactivation and Error Clear with DDT4ALL | DDT4ALL and R-Link 2 Tutorial

[@MicheleP]

⚠⚠ NEW OBD 2 INTERFACE TO USE ⚠⚠ Guys Important: USE THIS OBD 2 INTERFACE INSTEAD THAN THE ONE I MENTIONED IN VIDEOS. THEY “MODIFIED” IT AND NOW IT NO LONGER WORKS WITH DDT4ALL. USE THIS ONE, IT’S 100% OK 👉🏻 amzn.to/3UkIrdQ CHECK OUT THE FULL PLAYLIST OF DDT4ALL HACKS AND ACTIVATIONS FOR OUR RENAULT: kzbin.info/aero/PL0_lM34jB4W-P_XvmnT1dxEKMvjcf8WKj

[@keller40]

Hello, rlink2 crashed on my Kadjar vehicle and it won't open. Did you solve this?

[@preacher1368]

Hi ya does this work on the megane coupe mk3 2015 facelift model, as it does not have the centre dashboard display?

[@simeonyonkov7475]

I watched your video about the TPMS tire sensor and it was very helpful. But I want to do the same for Megane 3 - 2015. The steps are not the same as yours. I will be very grateful if you know the steps to deactivate the Megane 3 sensor. I can't find this information anywhere. I hope you can help. Thank you !

[@littlebox3690]

I'm looking for the same ....

[@johnboy2436]

Please can you help me. I have a Megane 4 RS. Im changing from 18 inch to 19 inch wheels. In ABS/ESC section on the video.... i have 3 different versions on my DDT4ALL. - ESC_15-40-USC_1.12V - ESC_15-40-USC_1.5V - ESC_15-40-USC_1.8V Which one do i change???

[@alexanderpoulsen9214]

Tried following this, and now Im getting ‘Error Prog’ and sometimes blinking ABS error. Tried putting things back. Did not work either. Any help?

[@1986Alexandar]

Can i use THINKDIAG diagnostics on the ddt4all program?

[@moussaouiautodiag]

hi dear colleague thank you infinitely for the information you give good luck, I am already subscribed to your channel C is great

[@HankoBeats]

Thanks MichelleP! Finally I'm sorted. 6 months ago I bought bigger 20" alloys with new tpms for my 2017 koleos. Renault wanted £450 for reprogramming the new sensors. I didn't want to pay them that much just for a 30min job. So I searched the web, forums etc. and I came across your video. Bought the OBD2, downloaded the program and connected the wifi pc to the OBD2. It was very easy. I also changed the welcome logo to RS logo.

[@stereotimo]

Many thanks for this video! Using your instructions, I made my own version for Renault Zoe: kzbin.info/www/bejne/nnS5ZWOdhNmNnbs

[@Kebatoff]

10010 views, 10 mounts ago, 100 likes, as i lucky?)) Waiting for 10000 subscribers!

[@moteros4861]

Hi friend. Nice tutorial. I have a clio IV and I have one question. I disabled in TDB module, the TPMS: option (without TPMS) because one of the 4 sensors are broken. After I reset dashboard to clean the message ( Test tyre sensor), but after a few km the message appears again. Why does the message appear again, if I have tpms disabled? Thank you bro. Pd: using the same obdII + ddt4all

[@sevincadyaman3833]

Display animation video

[@graz-e.m.s]

Thank you for your video.

[@DH4460]

Hi Michelle. Great ;-) Next step could be to activate the TPMS via the ABS sensors . It's possible, but so many parameters to fill in. Could be very easy if we could connect to an "old" Meg4 in ABS TMPS version

[@spinning_feeder]

Thanks a lot, Michele! I just disabled TPMS in megan 4! You're great!

[@tariq3877]

Love you mate I just disabled TPMS in my Renault kadjar today

[@MicheleP]

Love u too ❤️😂

[@autodiagbechar8410]

Hello my brother, I want a way to solve the problem of the medianav that he has when taking off and gives the Renault sign

[@sikoravk]

It does not work on megane 4 2018. It loads all settings for cluster but after I change setting to "Without TPMS" it disconnects. Then I can't connect anymore. After some time it connects again but can't load parameters. Program just freezes.

[@cristianstoenescu6318]

Hi Michelle.Great.I bought the OBD interface that you recomand,i download the latest version of DDT4ALL from link you give it,but the pc can't connect to OBD interface [wireless] at port 192.168.10;35000.The message that appear is ,,No OBD interface found at this port''.Is there any modification in the pc i should make it .Thanks you .

[@alemtalic5535]

Hello MicheleP, I watched all of your tutorials, but I am stuck and I need help, I am willing to pay in exchange for the help. I swapped cluster, I had the simple megane 4 cluster, and I got one from megane 4 GT . I get parking sensor error, parkingbrake error, sos call error, and as soon as I open the front doors ( when just unlocking car ) the car plays the sound and warning as if the doors were opened while driving ( but car is parked and engine off ) Also, the new cluster has a lot of kilometers, while my car is under a year old, and has 30k. I went to the section you showed, even found the option to "sync" kilometers from ECU with the odometer, but nothing changes, and the errors are annoying. I tried to clear them with DDT4ALL, also following your tutorial, but didnt work. Please help, I can provide email or phone number for viber/whatsapp , whatever, and can pay for your trouble.

[@chefitalieitaliaanskokenop2200]

In my Megane 3 ph2 with ECU L38 ...95 (scan the ecu via can option first!) The option is not at all TPMS, the option is in the same sub menu but called SSPP; However you simply cannot disable it or on the ODO you will show ERROR PROGRAM...Garage told me since 2016 it is mandatory to have the check Hence no disabling of this menu allowed...cannot say if true but i cant put it OUT.

[@Airbag888]

I just bought a 2nd hand megane 4 gt-line 1.2 I'm wondering if TPMS is standard or not? When I check the Tyre pressure screen it's all - - if I reset it it tries forever but never settles on a number

[@bulletgt3]

Hello! If i have a Renault Kadjar 2017 with TPMS but not with the touchdisplay stereo, do i have to enter the Audio ECU and change it? Or do i only need to go into the cluster ECU? Best regards from sweden!

[@subsenix]

hello, great video. I have a problem editing the circumference of the wheel. On the READING side(right) I have all with red-NO DATA... what should I do ?

[@evaldaskum6086]

Hey maybe you could help with this ddt4all i could turn on winter mode in renault laguna 3 for elektric parking brake ? 😊

[@yarydermisek2697]

Hello, do you know if it works with same obd device as you use, but for 1.6 dci 2018? Because on the description of device, they tell it works just for cars whit petrol.

[@pawemol8178]

hey i have last version ddt... and i don't have one cluser 30.02...

[@steveturnbull9542]

Is it possible to add the RS monitor to a RS280 RLink2 using DDT4ALL?

[@marcelpris3182]

Te salut din Romania.Am un Megane 4 din 2017 si am 2 rânduri de roti de vară si de iarnă.Ambele cu senzori de presiune .Pe cele de iarnă e ok .Dar când le pun pe cele de vară le citește o perioadă scurtă după care se aprinde martorul in bord.Am fost la reprezentanta si mi-a spus că nu citește decat o serie de senzori.Si de fiecare dată trebuie să trec pe ei.cand schimb roțile.din pacate e cam scump.In concluzie Meganul meu poate memora 2 seturi de senzori.Salutare din Romania.EȘTI Super Tare!

[@mikelbringasdiaz8955]

Hello friend, would it be possible to add more sensors? Let me explain, my car megane 2 phase 1 only compatible with vdo sensors, in megane 2 phase 2 there is more compatibility, even oem sensors, would it be possible to add them? Thanks

[@andreylisitsa4857]

renault kadjar. dealer said that is not possible to switch off TPMS sensors. The car is on guarantee.

[@MicheleP]

it's possible, believe me. just follow the guide.

[@piotrk.6272]

Ciao Michele, if could I have the question, after changing the tires the error with the "key" has appeared, did you know maybe how to reset (clear) the error without deactivation tmps sensors? Just to force the system to new search the sensors? Thanks for your answer. Ciao

[@diegodamiano8839]

Ciao ho una Twingo 3,ho provato a togliere la spia tpms,ma quando confermo sul quadro mi dà ERROR P,sbaglio qualcosa? Sapete come mai esce quest'errore?

[@thade554]

hey man, is TPMS sensor something to worry about?

[@fastlanetuningschweiz6632]

does this solution work on the older non -digital dashboards?

[@Margusheil]

Ok, there is the problem: No data and everything red.

[@plop386]

good french accent actualy =)

[@MicheleP]

noooooooo!!!!! shame on me :)

[@bozniatube]

Any idea if this will work on Clio Mk IV? No R Link.

[@marcopisani9628]

Ciao Michele ho una Megan 2016 edc vorrei chiederti se ci fosse un modo per visualizzare il numero di marcia dal contakm o non cé ad esempio ho P R N D non esiste un modo per vedere D 1 D 2...? Grazie mille sei molto bravo apparte per l'inglese che non capisco un granché 😂

[@crasino1]

Ciao, ho acquistato dei cerchi con gomme e sensori già programmati renault, devo ancora montarli però mi hanno detto che potrei avere dei problemi nel farli riconoscere alla mia megane 4,c'è un modo tramite ddt4all per risolvere se ne fosse necessario? Grazie

[@armandasm73]

Hi, how to deactivate distance radar? thanks

[@ИванПоддубецкий-к9ж]

Привет друг! Спасибо большое тебе , у меня и у друга каджар ,после смены колес не знали как победить ошибку ! Очень благодарны тебе ! Привет из России тебе Hello Friend! Thank you very much, my friend and I have a kajar, after changing the wheels, we did not know how to overcome the mistake! Thank you very much! Hello from Russia to you

[@MicheleP]

Mmm.. I don’t speak neither understand Russian

[@ИванПоддубецкий-к9ж]

@@MicheleP Привет друг! Спасибо большое тебе , у меня и у друга каджар ,после смены колес не знали как победить ошибку ! Очень благодарны тебе ! Привет из России тебе Hello Friend! Thank you very much, my friend and I have a kajar, after changing the wheels, we did not know how to overcome the mistake! Thank you very much! Hello from Russia to you

[@MicheleP]

@@ИванПоддубецкий-к9ж well, you should follow the procedure i show and just select the Renault Kadjar instead than the renault Megane. the procedure is the same!

[@andreylisitsa4857]

и получилось отключить датчики колёс? Мне дилер сказал, что на кджаре отключение не возможно, высокая машина и есть возможность переворота, вследствие уменьшения давления. Для остальных рено= пожалуйста. Вопрос у меня к Вам= можно ли отключать ситему ESP, у меня самая простая версия на механике, бензин 1.2 Тсе. Программа управления есп намного лучше сделана, чем на тойоте, с которой я пересел, и при залезании на горку с очень тяжёлым прицепом, на тойоте приходилось выключать есп, дизель душился очень сильно, и был риск не забраться. На Рено всё веселее, и на 2й передаче залезал, есп светился постоянно, но не мешал сильно. Просто остались страхи не забраться на гору с весом в тонну на прицепе, вот и спрашиваю по отключению есп. Кнопки отключения нет. заглушка.

[@ИванПоддубецкий-к9ж]

@@andreylisitsa4857 про датчики дилер конечно загнул ,а если нет датчиков у других у них постоянно что-ли риск перевернуться ?))) Зайди на Драйв2 найди про каджар ,там у меня все есть про отключение . ЕСП вот к сожалению отключить пока на каджаре не удается .

[@Corleonenigga]

Hi.. I'm trying to connect with a usb scanner and it says no data in all the boxes.. is it a scanner issue or connecting to the computer?

[@katriinavirkkala6856]

Hi Michele I just bought the tool. Couple of questions: 1. Can you use this tool to activate automatic parking brake function when powering of the engine? From what Ecu? I have Talisman Grandtour 2016. Tool doesnt read the ABS/ECU... so apparently no support to that Talisman module. 2. Can you use this tool to activate ECS-support to trailer towing? I have bought a car spesific electric kit with the towbar so that should be ok for this to work...

[@doorht8721]

Hello, we can fix tpms with ddt4all?

[@moteros4861]

Sorry but not works on clio IV.

[@master742007]

ciao sapresti dirmi come leggere i reali klm fatti su renault scenic? ho seguito un tuo video ma non trovo la parte da te descritta nel video...

[@anumonantony4141]

Is there any device or easy method to relearn the TPMS for my grand scenic 3?

[@e.k2801]

Works with Dacia too ?

[@thedigitalemotion]

Will this device clear the older Renault Megan 2014 Pressure warning light?

[@EagleForceNL]

Can I disable TPMS like this on a Megane 2 Cabriolet from 2004?

[@EagleForceNL]

Anyone??

[@dongwang3569]

Hi, Michele, Is this tutorial applicable for Grand Espace 4.

[@-5JA-]

Very usefull, works also on Megane 4 2019 life :)

[@NinoSpl93]

Ciao ho seguito alla lettera il video ma mi da error prog sai come risolvere?

[@MicheleP]

Hai fatto tutti i reset del caso?

[@NinoSpl93]

@@MicheleP se rimetto le impostazioni originale ritorna alla normalità con la spia

[@joaodavidg]

Do you know how to change the maximum cruise control speed with DDT4ALL? When driving, I can only set up to 150 km/h. It doesn't let me set a speed above that value.

[@MicheleP]

Tried several times, change the speed but every time I start the car the speed will reset to 155km/h. Need to study more!

[@joaodavidg]

@@MicheleP Thank you for your answer. If you find the solution, please post a video describing the procedure.

[@flaviuspopescu4472]

Is this tutorial also valid for Megane 4 Zen without navigation and analog board?

[@MicheleP]

yep

[@lmaffini]

Grazie mille Michele

[@patrykpekalski613]

Show the movie how to turn off ESP because winter is coming soon

[@MicheleP]

hi partyk, you should check my videos better.. i uploaded that video some months ago :)

[@nathangilmour4493]

Very helpful 🤙

[@cristiannuncibello4637]

Ciao Michele, c'è un motivo in particolare aver cambiato la misura delle gomme su ddt4all

[@MicheleP]

si, come dico nel video ho cambiato le misure delle gomme perchè ho montato i cerchi da 17 pollici e pneumatici 205/50. la centralina ABS deve essere tarata per le esatte gomme che monti, altrimenti rischi che in caso di necessità non ti freni nel modo giusto. stessa cosa per ESP

[@casperrode3312]

I cant get connect?

[@cristiannuncibello4637]

Ciao Michele, secondo te si può aumentare il tempo del lunotto posteriore (sbrinatore).

[@MicheleP]

No quello no perché è comandato da un rele, bisognerebbe sostituire il rele

[@at0ny]

Is it posible with ddt4al to use with obdlink mx+ BT adapter wirh Bluetooth?

[@MicheleP]

Yep, but the connection is more unstable

[@at0ny]

@@MicheleP Oke thanks. I have the mx+ because i use it with bimmercode. Wil try it someday wirb ddt4all

[@casperrode3312]

Tanks for all vidios man... Hov to download DD4All and can i do It on a Phone huawei p30 pro ore dos it have to be a laptob

[@MicheleP]

Hi! There’s a version for Android phone. But I never used it, and it seems you can only read infos, not write. For that you need a pc

[@casperrode3312]

@@MicheleP ok il grap my pc in sted

[@casperrode3312]

Are the link stil woking?

[@paolodrago806]

Ciao Michele volevo chiederti se potevi tradurre questo video in italiano grazie e un altra cosa che volevo chiederti. Montando le gomme invernali completi di cerchio senza sensori di pressione e possibile disattivare l'errore sul quadro

[@MicheleP]

Ciao, si, il video dice proprio come fare nel caso si montino gomme invernali senza sensori di pressione (come faccio io). Il video è in inglese perchè così chiunque lo può seguire, per gli italiani che non anno l’inglese basta seguire le immagini.. si riesce a fare comunque, oppure metti i sottotitoli di KZbin in italiano. No sono perfetti ma si capisce bene

[@paolodrago806]

Grazie Michele gentilissimo come sempre

[@nicolaucarvalho172]

buona notte è possibile attivare l'allarme della portiera del conducente o megane 4 porte

[@MicheleP]

Devi avere installato l’antifurto, altrimenti no perché manca modulo hardware

[@nicolaucarvalho172]

@@MicheleP grazie mille per il tuo aiuto

[@chefitalieitaliaanskokenop2200]

i did this selecting megane IV, i actually have a Megane station wagon from 2014, once done there is "ERROR PROGRAM" instead of the TPMS infos. Any idea? Is this just because I used the wrong car model? I tried to undo the change but it wont clear. I put the old wheels back but the menu is just gone and replace with the "ERROR PROGRAM" Help please

[@chefitalieitaliaanskokenop2200]

The garage told me the tpms is store in 3 devices, odometer, ecu and one more...if one is out, the other 2 will complain about it and give errors...so i need to find the other 2 and change them. This tutorial did not work for me.

[@MicheleP]

With my tutorial I always manage to clear the error. So I’m sorry if for you doesn’t work but I cannot help you

[@chefitalieitaliaanskokenop2200]

@@MicheleP i am not blaming you ;), just a pity it doesnt work for my megane sw 2014.

[@chefitalieitaliaanskokenop2200]

@Michele Predieri and to whom it may help, i fixed the issue. In my Megane 3 ph2 with ECU L38 95 (scan the ecu via can option first!) The option is not at all TPMS, the option is in the same sub menu but called SSPP; However you simply cannot disable it or on the ODO you will show ERROR PROGRAM...Garage told me since 2016 it is mandatory to have the check Hence no disabling of this menu allowed...cannot say if true but i cant put it OUT.

[@thedigitalemotion]

@@chefitalieitaliaanskokenop2200 I have a Renault Megan MK3 Diesel Estate. I want to turn my tyre pressure sensors off with this DDT4LL. How did you do it on yours? Thanks

[@abdurahmankaraduman1213]

Can tmps on / off button be added to rlink2 screen?

[@MicheleP]

Unfortunately not. In r-link you cannot create things, you can only activate or deactivate stuffs 😂

[@abdurahmankaraduman1213]

@@MicheleP you have activated traction control via rlink. Is it possible to activate tmps with rlink? ok again to activate tmps again to use ddt4all is required?

[@MicheleP]

@@abdurahmankaraduman1213 yes, DDT is required to activate/deactivate TPMS

[@manolinp]

Awesome, as usual! Thanks!!!

[@MicheleP]

thanks man!

[@lorenzomolitierno3443]

Ciao lo so che è qualcosa che non va fatto ma potresti fare un video su come diminuire i km percorsi di una Renault Megane

[@MicheleP]

ci tengo al mio canale youtube, non promuoverò mai un video di una cosa illegale.

[@MrSixteam]

lorenzo molitierno e proprio una piaga quella dei km scalati... comunque bravissimo anche io sono un appassionato di DDT4ALL... e ho sperimentato tante cose... es welcome e byby sui fari a led!!

[@lorenzomolitierno3443]

Almeno esiste un modo su una Renault Megane di verificare la veridicità dei propri km

[@MicheleP]

Si, é uno dei prossimi video.

[@craiggoh6585]

Great videos, gonna try soon. Btw are u able to activate the 4control option in the perso mode?

[@MicheleP]

How can you activate 4control without having it???

[@craiggoh6585]

Michele Predieri i hv the 4control. Im asking abt the option in the sense menu

[@MicheleP]

@@craiggoh6585 well, if you have the 4contrl you should have the menu instead.. right?

[@craiggoh6585]

Michele Predieri apparently not..thats why im asking

[@fairytail3165]

One of my TPMS sensers is broken when I change the tires, and how can I link the new senser to the car system? Please help me. Thanks a lot.

[@MicheleP]

If you bought original Renault sensor they will auto configure.. it will take also one hour, don’t worry 😉

[@muttazsaied4396]

@@MicheleP what if the sensor isn't the original but has the same part number? what is the process to configure it? appreciating your reply.

[@MicheleP]

Well actually it should auto configure it too!

[@muttazsaied4396]

@@MicheleP thank you

[@muttazsaied4396]

@@MicheleP i have another explanation. how i could open and configure the front Camera through the DDT4ALL?

[@carstenwei9518]

Great Video 👍

[@MicheleP]

Thanks!

[@hirayaman246]

Liked it ! Can the TPMS be deactivated permanently?

[@MicheleP]

Yep! Just leave the parameters like these!

[@hirayaman246]

@@MicheleP Got it ! I'll give it a try !.....have you had or heard about the 1.3 TCE gpf petrol engine beeing sensitive about gasoline quality? Mine seems to lag a little till it warms up....

[@MicheleP]

@@hirayaman246 yep.. the fact is: sometimes with poor quality gasoline happens that there might be some "pre detonations", and the ecu sees it as a "knocking".. this could lead to "recovery mode" by the ecu, so there's a lack of power. try to fill up with premium gasoline, or with a cleaning additive

[@hirayaman246]

@@MicheleP Thank you so much for your answer - i thought of this but still didnt believe it was so sensitive... I mean, the first 2 minutes after it starts, you must rev it till 2500-3000 rpm otherwise it wont pull, it laggs.....made me think that maybe there were some ignicion problems....

[@MicheleP]

@@hirayaman246 99% is low quality gasoline

[@micheledg3809]

Ciao Michele, mi piacciono i tuoi video per DDT4ALL, ma non avendo OBDII interface, non è possibile eliminare le spie dei TMPS dal cruscotto usando il DEBUG MODE? Ho un kadjar 2019 SE2. Continua così......

[@MicheleP]

Purtroppo no, devi entrare con obd nel cluster del cruscotto. Comprala su Amazon usando il link che ho messo e quando hai finito il lavoro la restituisci 😂

[@micheledg3809]

Volevo provare a disabilitare i TPMS, ma ci sono 3 tipi di kadjar in DDT4ALL e la mia è la sport edition 2 a benzina 140cv, aiuto quale scelgo? 🤔🤔🤔 E che rlink scelgo che ho visto che non c'è la versione 7