TPS Sensor Install -1999 Chevy Tahoe

[@Superchacho83]

man i appreciate the help ya just gave. bringin this burban back to life!

[@MattThompson-y2t]

I like that he explained everything so ppl that have no clue don't mess up

[@arguswil]

Great explanation!!!! Will check into my issue. 🎉 Thank you !

[@oscarortiz860]

This guy knows a lot 😃 good video btw.

[@ieattaco11]

Found your video after swapping my 4l80e

[@nathanrussell2158]

Have the same truck. Love that thing.

[@twobravo1]

Really good in depth video great information.

[@MarcusEdbladGolf]

Thanks for this video. My 1999 GMC YUKON is running like new. Thought it was the gearbox but it was the TPS.

[@billcornejo758]

Great tutorial, one the best / Thank You , very informative

[@robmora2703]

Good videos. I’m especially interested in anything you show on the 99 Tahoe as I got a 2000 z71 old body style.

[@theasapautomotivechannel6815]

Nice! I love those. That, the unlimited and the police package were the only ones made that year if I remember correctly?

[@Judy-f1y]

Hey, my 97 Tahoe is running very rich. Changed out plugs, wires. Now running better but still rough vibration and running rich? What to replace next. 249,000 miles

[@Mikebtracks]

Great info

[@casann85]

I had battery out of pickup (5.3LM7) for a while to redo some bad power cables. Now I notice if I am half throttle or more the engine acts like it shuts off right after shifting. I let off the throttle when this happens an everything is fine. Do you think this is a TPS issue caused by having the battery disconnected? If so, is there a relearn procedure?

[@pedromendoza4262]

Well I put a new throttle senser in but my truck still bogs down a little bit any ideas out there

[@BRED23]

I ordered the ac delco tps from Amazon and I’m still shifting weird thru first it’s only sometimes though. The part looks cheap super cheap actually and has a white sticker no actual part number should I return it and buy one at the dealership

[@hb5914]

Yes, you should probably return it and purchase one from a GM dealer if you want a bonafide AC Delco/Genuine GM part because of the potential of counterfeit parts in the supply chain (chinesium). I stongly suggest that whatever you consider purchasing from Amazon to read EVERY review, starting from the lowest/worst experience to the best experience, because used/altered/counterfeit parts have and still are being sold on Amazon.

[@BRED23]

@@hb5914 returned got one ac delco from autozone still running the same

[@thomasslone4728]

What would cause my 5.3 Silverado have a hard start it will crank and crank them farther up but an idle rough then Smooths out but from a cold start at far as right up

[@jomama7458]

thanks big help.

[@darrylmurray2261]

Thank you...B^ )

[@jasonsmith4243]

The relearn procedure is turn key in the on position engine off then unplug the tps for 30 seconds turn key off then plug tps back in

[@cuzzocousin8966]

Hey, can you do a video on a distributor replacement and setting cmp retard on your Tahoe? I have a 1999 suburban that I’ve been trying to get the cmp retard dialed in on and no matter where I adjust the distributor to, my scanner reads -45. I’ve adjusted this distributor 30 times at least and I get the exact same results.

[@hb5914]

According to Eric O at SouthMainAuto, after your engine reaches operating temperature, you must first rev your engine to 1000 rpm or as close as you ca😢n. Then look at the CMP Retard value, this is your true CMP retard value. After turning off the engine and loosening the distributor hold down, then turn the distributor counter-clockwise to advance it and clockwise to retard the timing. And verify the CMP retard at 1000 rpm after letting the engine reach operating temperature.

[@malakjudah4080]

a 20 minute vid to replace a tps.....wtf?!?

[@theasapautomotivechannel6815]

Thanks for watching!

[@involucradosperformance]

Sooo what about the relearn procedure????

[@Devo1987]

is there on for a 1998 gmc k1500 5.0 L auto ?

[@sr25jd]

Good video on how to fix , but man you talk way to much .. fix and go .. not fix and talk and talk ….😂😂😂😂😂

[@WarHawk919]

Damn he didn't start actually touching anything until 6 minutes in.