Tracing a Shape using Pen Tool in Photoshop, Batman Logo
Пікірлер: 155
@AikaVelasco4 жыл бұрын
Finally, a tutorial that I won't have to watch for 30 minutes.
@DanielWhiteWithCanon3 жыл бұрын
For real I try to do the same with my own channel. I do wish youtube would respect the users better when searching for knowlage tutorial based content and feed us the quicker and better content rather than the longwinded entertaining content.
@graphicsociety13 жыл бұрын
I'm glad I could help.
@theinfamouspat59772 жыл бұрын
yeah i liked the vid, right to the point lol, no bs filler
@tongdtai3 жыл бұрын
Thank you so much ! Really appreciate your simple explanations after watching hundreds of complicated tutorials.
@Weaselmittens3 жыл бұрын
Perfect! This gave me exactly what I was looking for! I've been trying to learn this tool for ages! Thank you!
@seino__4 жыл бұрын
This is how you make a tutorial. You neatly zoomed into whatever you are using so that people with restricted data plans can be able to view it in lower quality too and you explained about it clearly.
@graphicsociety14 жыл бұрын
Sanket R thanks a lot for the nice comment.
@alinej27633 жыл бұрын
Thank you man! Short and simple and exactly what I was needed.
@angelbonser49093 жыл бұрын
Thank you so much!! I've watched longer and shorter "how to use the pen tool" tutorial!! None where as user friendly as this one!!
@stopitskiiiuuup40062 жыл бұрын
THANK YOU SO MUCH BRO YOU ARE A LIFE SAVER!!!! STRAIGHT TO THE POINT AND LESS TALKING!
@graphicsociety12 жыл бұрын
My pleasure
@stopitskiiiuuup40062 жыл бұрын
@@graphicsociety1 NOW HOW DO YOU FILL IT WITH COLOR???
@mrsheyland3 жыл бұрын
Nice bite size tutorial! Well done. I love that you pointed out the difference between the short cut keys for alt/ command for both pc and mac (this is something that always throws me!) and selection and deselction of the points. Thanks so much :-)
@adnansalim5059 Жыл бұрын
🎉
@triciacleofas69213 жыл бұрын
best tutorial of using pen tool! simple and precise, thanks!
@sundeshbalraj3 жыл бұрын
Short, sharp and to the point !
@khuthejatulkubra79184 жыл бұрын
THANK YOU!!!! NEVER HAVE I SEEN SUCH A SIMPLE PEN TOOL VIDEO WHICH IS ON POINT. THANK YOU AGAIN!
@graphicsociety14 жыл бұрын
khuthejatul kubra thanks 🙏
@sunshinecommentswoop49022 жыл бұрын
thank you for this, i have to do three backgrounds for animation and this is a life saver
@amirimranz3 жыл бұрын
thank you so much very straight forward and easy to understand 🙏🏻
@chip28814 жыл бұрын
Really a perfect tutorial, thank you pal
@bdotskigaming98092 жыл бұрын
Thank you so much for this. YUP!!! your video still help till this day.
@Desilu154 жыл бұрын
This was short and well explained. I’m new to adobe photoshop and was learning how to use this tool.
@graphicsociety14 жыл бұрын
Thanks :)
@aokisanchez26403 жыл бұрын
Omg! Finally I leaned how to use the pen tool! Your skills are beyond Graphic Design! I have been watching quite a lot of videos on pen tool but only yours made me actually learn! Forever thankful man!! Following you 🤍
@haianhpham39614 жыл бұрын
i really like the way you explain everything here. Very clear and completely understandable to beginners. Thank you!
@graphicsociety14 жыл бұрын
Thank you :)
@D-Mny2 жыл бұрын
Thank you, plain and simple to the point. 😉
@daisydevassy92774 жыл бұрын
Oh.my.god. as simple as that. I can't believe I wasted my time on half an hour tutorials when yours was just a click away...this is amazing, finally I can use the pen tool.
@graphicsociety14 жыл бұрын
Daisy Devassy thank you for your kind words :)
@gehabodhi18162 жыл бұрын
Thanks bro.. Finally i know how to use pen tool !!!!!!!! your tutorial is simple and easy to understand!!! thanks....
@musickgforindia5102 жыл бұрын
Images
@kaboomdynamite4 жыл бұрын
Amazing thank you! Quick and to-the-point!
@graphicsociety14 жыл бұрын
You're very welcome!
@fletched58144 жыл бұрын
This has helped me incredibly. Thankyou so much for putting the effort into making this video, It was clear and got to the point. Exactly what I needed! Thankyou
@graphicsociety14 жыл бұрын
My pleasure :)
@viralclips63574 жыл бұрын
VERY HELPFULL VIDEO. I WAS ALWAYS MESSING UP WITH THIS TOOL
@Mehranahmadactor2 жыл бұрын
this video was very very helpful thanks for sharing with us
@techology80218 ай бұрын
got the exact solution that I was searching for thank you so much
@xxcalliex_4 жыл бұрын
This helped me a lot today. Thank you so much
@graphicsociety14 жыл бұрын
Alicia Dy you’re welcome 😊
@elainechen50333 жыл бұрын
Thank you so much! This is short and precise👍
@graphicsociety13 жыл бұрын
🙏
@RumorsofWAAAGH4 жыл бұрын
Thank you for having posted this tutorial. It worked for me.
@graphicsociety14 жыл бұрын
You're welcome :)
@streetedcebu2 жыл бұрын
how did you make your edges sharp?
@The-Athenian4 жыл бұрын
You have literally changed my life forever.
@graphicsociety14 жыл бұрын
Ricardo Camacho what a great complement! Thank you.
@The-Athenian4 жыл бұрын
@@graphicsociety1 I'm serious, I used to do this point by point with straight lines because I could never figure out how to make several curves in a row. Every video I watched seemed to think that was too basic to explain, until I found you! Cheers
@graphicsociety14 жыл бұрын
I’m glad to hear that. Enjoy graphic design buddy!
@theresakhoury83872 жыл бұрын
Im trying to trace a logo but when i press make selection it traces the whole page dk if that makes sense so when i copy and past the image i traced just dissappear instead of appearing on a new layer
@danielkernya71174 жыл бұрын
you rock. ty sir
@ankitpal51244 жыл бұрын
simply explained very well
@ShashiraRavishka Жыл бұрын
Much love ❤️
@stellijer2 жыл бұрын
But what if we want to adjust the spline asymmetrically, as opposed to getting rid of it altogether?
@PROFkomunikacije3 жыл бұрын
nice and short!
@dandrabalfour64314 жыл бұрын
This was a decent video. Much thanks to you my friend
@graphicsociety14 жыл бұрын
Dandra Balfour you’re very welcome 😊
@volitones89363 жыл бұрын
When I place the anchor points it connects them. How do I prevent that?
@joya.olvera3 жыл бұрын
Thank you!!
@PugazhenthiRamesh4 жыл бұрын
Thanks a lot bro :)
@stax56332 жыл бұрын
Thank you this helped so much
@webdesignowl4 жыл бұрын
awesome bro thanks alot
@shakuntlasindhu8582 жыл бұрын
Thanks bro thanks a lot I spent 5 hr go get rid of it
@olayomiadams75564 жыл бұрын
Very useful!!! Thanks
@graphicsociety14 жыл бұрын
Gabriel David you’re welcome 😊
@photoshoplighten38094 жыл бұрын
love you man!!!!
@graphicsociety14 жыл бұрын
Photoshop Lighten thank you.
@ktibers57762 жыл бұрын
Thanks for sharing!
@gladlyjoseph51104 жыл бұрын
This was wut I’m searching for I’m gonna share with all my fellow fends who are interested int this type of stuff...
@graphicsociety14 жыл бұрын
Gladly Joseph glad to hear that.
@helinboz18435 жыл бұрын
thanx you :)))
@dingowildd.42644 жыл бұрын
very nice tutorial sir, it helps us a lot. thank you very much.
@graphicsociety14 жыл бұрын
My pleasure :)
@zeejm.mrimpeccable77973 жыл бұрын
Thanks for this man
@graphicsociety13 жыл бұрын
My pleasure
@Aka_amir_i3 жыл бұрын
Thank you so much I found this very helpful thanks
@graphicsociety13 жыл бұрын
Xeh I’m glad to hear that 🙏
@byLokie2 жыл бұрын
I watched about 6 other demos before this and NONE mentioned the "ALT" key to remove handle and I was beginning to think. There is no way to follow an image. Thank you
@stephenwarriner3873 жыл бұрын
Just after you closed the loop and zoomed out the point on the left wing appears to have moved since there is gray appearing outside the red line around minute 4:30 or so. A: why did it move and B: how would you fix it?
@graphicsociety13 жыл бұрын
I didn’t do a clean job closing that point. To fix it clean on that point using the Direct Selection tool, the white tool, then you see the handles. Move the handles slightly
@ghadirdidi22805 жыл бұрын
Thank you so much for this
@graphicsociety14 жыл бұрын
You're welcome!
@nadiabd68053 жыл бұрын
Thank you so much for this great lesson and good information. I have a question and I hope to answer it. The first is why did you lock the bat layer and the second is why did you reduce the transparency? please.
@graphicsociety13 жыл бұрын
Hello and thanks. I locked it so I would click and move it accidentally. If you don’t reduce the transparency you won’t be able to see the underlying layer to trace over.
@muqadasrafiq353 жыл бұрын
Excellent
@ishantakki Жыл бұрын
simple,🥰
@peiying89693 жыл бұрын
Thank you!!! That Alt key save me haha!
@graphicsociety13 жыл бұрын
You’re welcome
@mohaisens.panolong42342 жыл бұрын
THANK YOU!
@Intoxikacion4 жыл бұрын
thank you!!!! so much!
@graphicsociety14 жыл бұрын
Luis Voluntaryist my pleasure!
@cheekypeeky19413 жыл бұрын
Thanks mate im a student so this helps a lot!
@graphicsociety13 жыл бұрын
I’m glad to hear that.
@ferasedits8583 жыл бұрын
i felt you were a bit nervous while recording this tutorial but that's tottaly fine because this video is very useful and easy to follow.
@graphicsociety13 жыл бұрын
🙏
@Havanacuba19853 жыл бұрын
That was great , thank you
@graphicsociety13 жыл бұрын
Paul Fiero You are very welcome. I’m glad you liked it.
@phantomshredder13503 жыл бұрын
Thank you so much! I was watching a turtorail on how to make a game design character using the pen tool and i was so confused
@graphicsociety13 жыл бұрын
My pleasure
@samanthaprageeth90142 жыл бұрын
THANKS
@tez51994 жыл бұрын
Thank you man✌
@graphicsociety14 жыл бұрын
AimBot Harlz I’m glad it helped you.
@anmolbalti5219 Жыл бұрын
Thnaks.👍🏻
@richardiiliao4475 Жыл бұрын
Can this method be applied for laser cut?
@graphicsociety1 Жыл бұрын
Yes. You need to prepare the file for that. They may need you to change outline to a certain Color and save the file in a certain way. You also need to do some adjustments on the laser cutter software to define the material you’re using, cutting depth, etc.
@oadefisayo3 жыл бұрын
Simplest tutorial on the Penn tool!
@graphicsociety13 жыл бұрын
Thank you
@jirkadolezal81274 жыл бұрын
thank you
@alissarsb81803 жыл бұрын
but how do you color the inside after drawing it? i need help
@graphicsociety13 жыл бұрын
Select the drawn shape and go to Properties panel to change the fill and stroke.
@cabdiraxmaandaahir29503 жыл бұрын
Thank you
@andyvu80583 жыл бұрын
Thanks so much! :D
@graphicsociety13 жыл бұрын
Andy Vu my pleasure.
@z.m.43093 жыл бұрын
Thank you!! I was getting so frustrated my teacher did not explain this well at all
@MonsieurPhoton4 жыл бұрын
Yes, thanks! Suscribed! I can't understand how people can hit "dislike" I mean are they trolls are what?
@graphicsociety14 жыл бұрын
Thanks a lot, I appreciate it :)
@muchodj4 жыл бұрын
Thank you - time to go to work
@graphicsociety14 жыл бұрын
muchodj glad you found it useful :)
@MilesSpearman4 жыл бұрын
I have a black line surrounding my trace do you know anyway I get around that?
@graphicsociety14 жыл бұрын
Miles Spearman select the Pen tool and then look at the Options bar or the properties panel. You probably have a fill assigned to your pen tool or you have a stroke that is very thick. You need to adjust those.
@MilesSpearman4 жыл бұрын
@@graphicsociety1 How do you change the color of the stroke?
@graphicsociety14 жыл бұрын
Miles Spearman First ensure your pen tool is set to shape not the path. When you finish your shape you can go to properties panel or options bar on the top to change the shapes fill and stroke colors.
@HighLanderPonyYT3 жыл бұрын
Thx!
@graphicsociety13 жыл бұрын
You're welcome.
@josiedudac17933 жыл бұрын
Thank you I had to do this for class and I was really confused
@graphicsociety13 жыл бұрын
Happy to hear that
@Lupic19576 жыл бұрын
Happy you did not put music
@essicc5 жыл бұрын
omg. me too haha im chillin trying to learn
@graphicsociety14 жыл бұрын
Not my style :)
@denasl23903 жыл бұрын
thank you so much bro
@graphicsociety13 жыл бұрын
You’re welcome 😊
@VahidNajafii3 жыл бұрын
I don't know why I feel that you have a Persian accent! Are you Persian? :))
@uzairahmad42213 жыл бұрын
TYSM
@graphicsociety13 жыл бұрын
You're welcome :)
@raceworld56244 жыл бұрын
But how to fill a colour in it? Pls answer
@graphicsociety14 жыл бұрын
When you close the path of the shape then you can go to properties panel and change the Fill colour to anything you want.
@justinsolomita92833 жыл бұрын
You couldn't use the curvature pen tool?
@graphicsociety13 жыл бұрын
Good question! It’s not as accurate. It may or may not work for this shape but overall it gives you less control.
@DrukFilms3 жыл бұрын
Finally I am at right place
@graphicsociety13 жыл бұрын
🙏
@RezaPratamaR3 жыл бұрын
grazie
@alexdelarge20953 жыл бұрын
Results won't be anywhere near as good without a very thick stroke. The thinner the lines are, the sharper the passage point between each segment will be. Unfortunately this still isn't enough to make a smooth, thin tracing line.
@mgsdesigns223 жыл бұрын
whenever i make a curve, it automatically connects and makes a semi circle chape can anyone help?
@JahvisLoveday3 жыл бұрын
Thank the lords for you
@graphicsociety13 жыл бұрын
My pleasure.
@josiedudac17933 жыл бұрын
Hi when I hold alt my point doesn’t delete
@graphicsociety13 жыл бұрын
Sorry don’t know why. It does here
@thebokchoyboy922 жыл бұрын
that alt trick doesnt work
@ArifMd4 жыл бұрын
THIS VIDEO IS CURSED! IT HAS 666 LIKES!
@Dark-kb7mk3 жыл бұрын
Lol galat kar rahahe bhai tu
@spudspuddy Жыл бұрын
i cant do it, everytime i click on the anchor point it deletes it, i hate the pen tool