Tractor Brake Leather Replacement & Brake Disk Resurfacing | Fiat Tractor Brake Adjustment.

#brake #leather #replacement #brakeleatherreplacement #disk #resurfacing
#adjustment #fiattractors#workshop #howtosolvethisproblem
#### Brake Leather Replacement
1. Safety First: Before starting, ensure the tractor is on a flat surface. Engage the parking brake and place wheel chocks under the wheels to prevent any movement.
2. Remove the Wheel:
- Lift the tractor using a hydraulic jack and secure it with jack stands.
- Remove the wheel to access the brake assembly.
3. Access the Brake Assembly:
- Locate the brake drum and remove it by loosening the retaining bolts.
- Carefully detach the brake drum to reveal the brake shoes.
4. Remove the Old Brake Leather:
- Detach the brake shoes from their mounting points.
- Remove the worn-out brake leather from the brake shoes. This usually involves unclipping or unscrewing them.
5. Install New Brake Leather:
- Clean the brake shoes and ensure they are free of any debris or rust.
- Attach the new brake leather to the brake shoes, securing them properly as per the manufacturer's specifications.
6. Reassemble the Brake Assembly:
- Reattach the brake shoes to their mounting points.
- Replace the brake drum and secure it with the retaining bolts.
7. Reattach the Wheel:
- Mount the wheel back onto the hub.
- Lower the tractor from the jack stands.
#### Brake Disk Resurfacing
1. Prepare the Tractor: Similar to brake leather replacement, ensure the tractor is securely lifted and supported.
2. Remove the Brake Disk:
- Access the brake disk by removing the wheel and brake caliper.
- Unbolt the brake disk from the hub.
3. Resurface the Brake Disk:
- Inspect the disk for wear and damage. Measure the thickness to ensure it meets the manufacturer's minimum specifications.
- Use a brake lathe to resurface the disk. This process involves removing a thin layer of the disk surface to create a smooth, even finish.
- Ensure the disk is resurfaced evenly to avoid any imbalance.
4. Reinstall the Brake Disk:
- Place the resurfaced disk back onto the hub.
- Reattach the brake caliper and wheel.
#### Brake Adjustment for Fiat Tractors
1. Initial Setup: Ensure the tractor is on a flat surface and that the wheels are securely chocked.
2. Access the Brake Adjustment Mechanism:
- Locate the brake adjustment access, typically found on the brake linkage or near the brake pedals.
3. Adjust the Brake Linkage:
- Loosen the lock nuts on the brake linkage.
- Turn the adjustment screws to increase or decrease the tension on the brake cables or rods.
- Adjust until the brake pedal has the desired amount of travel and resistance.
4. Test the Brakes:
- With the tractor still secured, press the brake pedals to ensure they engage smoothly and evenly.
- Make fine adjustments as necessary to achieve balanced braking on both sides.
5. Secure the Adjustments:
- Once the desired adjustment is achieved, tighten the lock nuts to secure the adjustment screws.
- Double-check the brake operation to ensure everything is functioning correctly.
6. Final Check:
- Test drive the tractor in a safe area to ensure the brakes are responsive and effective.
- Listen for any unusual noises and check for consistent braking performance.

[@ustadhanif2498]

Mashallah zabardast video ❤❤❤❤