TRAILER VALET Drill Powered Trailer Jack REVIEW

HEY KZbinRS!!!! THANKS 4 WATCHING!!!!! PLEASE LIKE & SUBSCRIBE
Here is the link to TRAILER VALETS website-------- trailervalet.com/
The Trailer Valet JX 5K Center is a manual hand-crank jack that has the versatility and capability to be powered by any 18-24V compact drill with the Trailer Valet Drill Attachment. It has a lift capacity of 5,000 lbs and its patented gear material composition delivers maximum efficiency while reducing heat retention. The JX 5K Center comes with weather-resistant shield protection, and is topped with our signature wrinkle black powder coating so that you can go further, longer. It’s time to MOVE FORWARD and replace the standard manual jack on your trailer! Power it up and save time, effort, and hassle and get to what you love most.
Comes standard with foot plate and a Trailer Valet Drill Attachment, Wheel Caster option.

[@Jays1ndone]

Why did I come across this….now I need one 😆 Also another layer of protection as if you don’t have the handle on it then it makes it harder to take. Thanks for posting!

[@lunasmovingcompanymovingst6152]

I don't see this on their website I have ridgid tools only. I wonder how the x5 octane drill and impact driver would do. Fast up/down = awesome.

[@matthewmeltonTEAMMELTONFISHING]

All I'm using is a Ridgid 18 volt drill and it does a great job! Do a Google search on TRAILER VALET and it will pull it up. Thanks for watching, please LIKE & SUBSCRIBE :)

[@Prokutzlawncareandlandscaping]

Great video ! They need to sponsor you!

[@PnwOnTour]

That Napa tool kit is old school, when gearwrench launched, nice flex heads with plain sockets for a promo 🔧

[@ericbradley5228]

Thanks man very informative. Keep it up!

[@matthewmeltonTEAMMELTONFISHING]

Thanks Eric, I appreciate the kind words my friend! Please like & subscribe I need all the help I can get. Lol

[@sdhomegrown760]

Saw this and now I just bought one

[@matthewmeltonTEAMMELTONFISHING]

Thanks for watching, please like and SUBSCRIBE. Hope you like it!

[@andersonjimmy1691]

Good video! Thank you. Are you still happy with it since your initial set up

[@matthewmeltonTEAMMELTONFISHING]

So far so good my friend it still works great! Please like and SUBSCRIBE 😊

[@markrankin3297]

My tailgate hits the top of my current jack, any problems with like that with this one?

[@matthewmeltonTEAMMELTONFISHING]

Its gonna depend on the tongue length of your trailer and where the jack is mounted because they are all made different. I haven't had any problems with clearance on mine but I have a big tex 5x12 trailer.

[@markrankin3297]

@@matthewmeltonTEAMMELTONFISHING Thanks Matthew! Happy Thanksgiving! :)

[@geneogden8470]

Good video. Just wish you would have maybe talked about the maximum height that you could extend the jack. I'm thinking about buying this same one and the website says 37 inches extended height. Seems very high, which is what I need, but just want to confirm it actually can go that high (from ground up to mounting flange).

[@matthewmeltonTEAMMELTONFISHING]

Hi Gene, I just went and measured it for you and with it fully extended from the mounting flange to the ground it measured 23 inches but you can put a wheel on it and gain probably 6 more inches of height. Hope this helps you out. Thanks 4 watching and please like and SUBSCRIBE. :)

[@geneogden8470]

@@matthewmeltonTEAMMELTONFISHING So awesome that you did that for me! Thank you! I'm baffled why on their product info they say this: "Retracted height: 23in ; Extended height: 37in" I wonder if they are considering the extended height to be to the top of the jack, which would be weird. Anyway, I suppose I can just add a wooden block to the bottom like I'm doing now. Anyway, thank you so much!!

[@matthewmeltonTEAMMELTONFISHING]

@@geneogden8470 you are welcome Gene, glad I could help!:) please like & SUBSCRIBE

[@pavelkolp]

@@geneogden8470 37” is probably from the mounting point

[@miklomorales4768]

That's why you use an impact and not a drill lol Good vid !!!

[@7eis]

Setting the drill clutch on a high setting instead of just drill might take a bit of the surprise out of it

[@cheftommy]

looking for a way to pull out a stump

[@miket2172]

I need this in my life

[@matthewmeltonTEAMMELTONFISHING]

Its alot faster that's for sure. Thanks for watching, please like and SUBSCRIBE. 😊

[@miket2172]

Done thanks for the help finding

[@LuxuryZoneProductions]

Ridgid tools our the bomb 💣

[@timslawncare5904]

I have one, when you have weight on your trailer, a drill will not work, you have to use a impact wrench

[@H2OTOYS-90]

And that is with how much tongue weight?

[@markchavez7707]

Im using a Milwaukee 18v it has a hard time when it’s almost all the way up

[@douglasbattjes3991]

you need to move the jack 45 degrees or your going to hit your tailgate, right or left side usually drivers side

[@johnlim123]

i see that product doesnt have anywhere to keep that attachment for the drill i know i will lose it.

[@matthewmeltonTEAMMELTONFISHING]

I keep mine inside my tool box on my trailer so I don't lose it, but it would be a great idea if they offered a place to store the socket attachment. Thanks 4 watching John, please like & subscribe. :)

[@frenchfryfarmer436]

Gonna weld up a 1/2" socket female onto my old jack stud after I cutting off the handle. Then all I need is a standard adapter. (or a ratchet from my tool kit, if lose charge in my drill)

[@capri8225]

🤟

[@Dream-dz8uv]

It will last about as long as toast in the rain

[@matthewmeltonTEAMMELTONFISHING]

Mines been out in the rain since I made the video and I haven't had any problems so far. I know it makes using the trailer just a little bit easier. Thanks 4 watching, please like and SUBSCRIBE

[@bus-fun-addict]

Knock you for a flip 😮

[@captainscottlum2371]

I like this idea but it doesn't look like it will hold up the rigors of my fishing charter needs, I think I'll wait a year or so and revisit the reviews also maybe by then a known company like Fulton will have come out with a saltwater version.

[@matthewmeltonTEAMMELTONFISHING]

Captain Scott Lum thanks for watching man I appreciate it! If I run across a saltwater version I'll try and remember to yell back at you. Please like & SUBSCRIBE. :)

[@cowboyup6438]

Use Nylock's to reduce trailer jack theft?? You have a problem in your area with trailer jack theft??? Probably those catalytic converter thieves branching out...

[@fdaav]

Geez man, I just want to see how fast it was with a drill. I bounced a around for 6 minutes and gave up. I guess some people are clueless but this was 12 minutes of worthless info.

[@matthewmeltonTEAMMELTONFISHING]

At the 4 min & 30 second mark you can see it hooked to a drill. Some people just like to whine about everything. While the information was useless to you I'm sure the other 28,000 people who watched it appreciated the more detailed review. Have a great day try not to be such a Richard next time in the comments. Thanks for watching! :)