Transfer Belt RICOH MPC 3502 3002 4502 5502 replacement

[@SuperFcbarcelon]

Merci beaucoup pour ce vidéo 👍👍👍👍👍

[@MrRicoh]

Thank You !

[@salman579]

Thank u its very useful

[@MrRicoh]

I'm glad you are watching my films about copiers. Hope the videos are helpful to you.

[@salman579]

Hello I have Ricoh mpc3003 machine when I give 1 print it's good but give 5 or 6 print continue its give double image print on the paper..can you suggest what's the problem

[@MrRicoh]

The Ricoh MPC3003 copier is a very good machine, but such a problem is impossible to diagnose from a distance. I can tell you that this problem may be caused by: 1. Drum unit 2. transfer unit 3. fuser unit

[@marcoguarnieri2029]

fixing problem or developer

[@salman579]

@@marcoguarnieri2029 That was transfer unit problem.

[@nanushaikh7040]

Sir what is resat code hp 436nda

[@MrRicoh]

Typically, there is no reset option on HP printers. You need to locate the fault and replace the damaged unit. After replacement, the printer will reset itself. There is no other option.

[@nanushaikh7040]

@@MrRicoh samsung k 2200 nd clear memory OR clear counter menu#1934menu Tech mode is open That type in hp436nd

[@MrRicoh]

I have to check it on the printer.

[@michaelandrews4783]

Never touch belt with bare hands wear gloves, finger grease will need to washed off with isopropol alcohol otherwise

[@MrRicoh]

You're right. I should wear gloves all the time during this repair. Nevertheless, the transfer belt to the cassette machine works fine after installation. I've already done 264,000 copies on the MPC3502 since the tape was replaced, and that's fine. I'm lucky I didn't damage my belt.

[@emadmodeye8207]

excuse me would you like to wear gloves to avoid finger print ? thank you!!!!!

[@MrRicoh]

You're right, it's important.