No plans on making money, but I need to tell you that your form of teaching is also the best I've found for my personal learning.
@TheLouisianaHobbyGuy3 жыл бұрын
Wow, thank you! Sometimes I feel like it's slow and rambling, but I don't want to miss explaining any steps like most videos do. I'm really glad you like it! Thank you!
@TheLouisianaHobbyGuy3 жыл бұрын
By the way! If you put the cutting board rectangle on a Tool Path (T1 or T2), you can set the letters to fill!
@hulabird2 жыл бұрын
Thanks for your smooth and calm delivery to my chaotic brain! I forget who sent me here but 1000 thanks!
@TheLouisianaHobbyGuy2 жыл бұрын
Glad you're here Debi!
@glenmanning63732 жыл бұрын
Blessings upon you my friend. I grew up in Slidell. I share your link all the time.
@TheLouisianaHobbyGuy2 жыл бұрын
Much appreciated Glen! Thank you! 👍
@_Darrell_2 жыл бұрын
Thank you for all the videos. I have learned a ton from them!
@TheLouisianaHobbyGuy2 жыл бұрын
Glad you like them Darrell!
@karenlynn583 жыл бұрын
Have you done a video that shows how to get rid of lines on a recipe card? Your videos are amazing by the way.....so easy to follow. Glad I found you Sir!
@TheLouisianaHobbyGuy3 жыл бұрын
I did one, but it didn't have lines. The process is the same except for tracing. scrub the sliders until the lines go away. Have a look: kzbin.info/www/bejne/ipWUYoKsjr1lqdU
@karenlynn583 жыл бұрын
@@TheLouisianaHobbyGuy Thanks Pal!
@kohle652 жыл бұрын
Hi, nice video. I am a beginner and what I miss a little is how you tread the plywood, mdf .... after the laser work. Maybe a suggeston for some videos.
@TheLouisianaHobbyGuy2 жыл бұрын
Do you mean treat? It depends on the job and what they're used for. This one is decorative, so I treated it with Shellac.
@bigdaddy1110582 жыл бұрын
I engraved a cutting board with text. Worked fine. Then I added a second line of text on another go around and it engraved it backwards! Job origin did not change (center). Device origin did not change (lower left). Does anybody have an idea as to why this happened?
@TheLouisianaHobbyGuy2 жыл бұрын
Something changed, no idea what, but Lightburn doesn't invert anything on its own. Never hear of this happening before. The only way I can see it happening is if the device origin changed, but you said it didn't. Might be a question better suited for the Lightburn Forum.
@jilldecastro77803 жыл бұрын
These are the kinds of videos I’m looking for! Thanks!
@TheLouisianaHobbyGuy3 жыл бұрын
Thanks!
@jimporter70633 жыл бұрын
"Pie yay ya" is how my Spanish mother pronounced paella.
@TheLouisianaHobbyGuy3 жыл бұрын
🤑 I can never pronounce it Jim! I say it different every time!
@lindaackroyd31153 ай бұрын
Could you do these recipes on a plastic cutting board, or would it melt?
@TheLouisianaHobbyGuy3 ай бұрын
You could with a fiber or UV laser Linda.
@markhall72223 жыл бұрын
Thanks, Love your video
@TheLouisianaHobbyGuy3 жыл бұрын
Thank you too for watching Mark!
@RaviPatel239 Жыл бұрын
Bro. You can also select he mistake your wife made and delete that part and move the rest closer to make it look like mistake never happened. ;) Thanks for the great video.
@TheLouisianaHobbyGuy Жыл бұрын
I wanted it in there Ravi.
@RaviPatel239 Жыл бұрын
@@TheLouisianaHobbyGuy oh I see. 👍
@jessetutterrow43203 жыл бұрын
I wanted to purchase some of these cutting boards before the price goes up (news media says Dollar Tree will raise prices to 1.25 starting next year) but I can't find them on the Dollar Tree web site. Do you have a link that will take me to the boards?
@TheLouisianaHobbyGuy3 жыл бұрын
Sure don't... the manager at the store told me that the supplier from China discontinued selling them to DG because of the new tariffs that started in Mar of this year. I'm guessing that they won't be available anymore.
@jessetutterrow43203 жыл бұрын
@@TheLouisianaHobbyGuy Yup, I tried two different Dollar Tree and the workers never heard of the cutting boards, so we are need to find another supplier. What do you think of Balsa plywood?
@TheLouisianaHobbyGuy3 жыл бұрын
@@jessetutterrow4320 Problem is, Balsa is not a dense wood, bamboo is. I'm going to be buying 8" boards from a local lumber supplier and cutting them down in the woodshop for my use. That's the only way I can even get close to the price DG had.
@michaelmcdonough19893 жыл бұрын
Dollar Tree does not have the cutting boards on their Web site
@TheLouisianaHobbyGuy3 жыл бұрын
Not anymore Michael. They lost their supplier in China.
@Perseids64 Жыл бұрын
FYI... They are back Bought a case tonight $1.25 ea. Free shipping to store
@veraigic65883 жыл бұрын
Thanks for the video, really helpful!
@TheLouisianaHobbyGuy3 жыл бұрын
Wow, my very first like! I'm glad you liked the video! Thank you so much!
@dbwhitted3 жыл бұрын
Awesome instructional video
@TheLouisianaHobbyGuy3 жыл бұрын
Glad you liked it! Thank you!
@QuixoticEnt3 жыл бұрын
Just a friendly correction: the reason the preview was all black is because of the rectangle. Setting it to line will give you outlines of the letters. After you deleted the rectangle you can put it back to fill and it will preview, and burn, correctly. BTW: your videos are better than Lightburn's own tutorials.
@TheLouisianaHobbyGuy3 жыл бұрын
Thanks for the comment! I had already done a few of these in fill mode and they were okay. Line mode has a much crisper and more detailed burn. I even tried Fill + Line, but I like line the best. Thanks so much for watching and the great comments! 👍
@edecastro9153 жыл бұрын
Nice tutorial!!!!
@TheLouisianaHobbyGuy3 жыл бұрын
Thanks a lot!
@Gino_5043 жыл бұрын
thanks! very indepth
@TheLouisianaHobbyGuy3 жыл бұрын
Thanks!
@stepz22883 жыл бұрын
Nice video grandpa
@TheLouisianaHobbyGuy3 жыл бұрын
Thank you Grandson!
@MrRobin44443 жыл бұрын
You can get rid of that Border by assigning it to the Layer 'T1' or 'T2' They will never be burned. U can choose to frame or not.
@TheLouisianaHobbyGuy3 жыл бұрын
I usually do that Robin as you'll see in some of my other videos, but I like to show more than one way to skin a cat!
@MrRobin44443 жыл бұрын
@@TheLouisianaHobbyGuy Yes I see 👍 I just started with laser engraving. Love ur videos they are a great inspiration.
@TheLouisianaHobbyGuy3 жыл бұрын
@@MrRobin4444 Thanks Robin! Welcome to our world! 😎