Those brackets look awesome. Looking forward to seeing the exhaust and steering and really stoked to see the Travelall!
@RebeccaGriffin-b8n5 күн бұрын
Puddin Fab Shop definitely loves his Internationals.
@gregjobson48445 күн бұрын
Nice looking gennie bracket you fabbed Jordan even better when it can be made from scrap or offcuts, the Inter should be a cool ride and probably the only one down here as well. Cheers Greg ..... How did you go with Craig's job back home?
@bennettscustomsco4 күн бұрын
Yeah probably not very common that’s forsure! I’ll send you some photos of Craig’s
@slicedbread90033 күн бұрын
International Travelall is cool. What is cool about them is that they were just building trucks.
@johndavidson49743 күн бұрын
Loving your channel, loving your work, always interesting and informative. Well done Jorden, keep it up. Kind Regards John.
@bennettscustomsco3 күн бұрын
Thanks for the support and kind words!
@LightBranches5 күн бұрын
That generator bracket is another great piece of functional art...not basic at all, dude!
@dennisschickling22495 күн бұрын
Nice Video. Nice Work. I'm looking forward to seeing your & your New CNC. I know that there will be some Great work for that. #STAYSAFE #PHILLYPHILLY 🇺🇸
@bennettscustomsco4 күн бұрын
Going to open a whole new level of creative!
@dennisschickling22494 күн бұрын
@@bennettscustomsco You Got Right!!!
@DavidJenkins-m6n4 күн бұрын
Hiya I get all my hard wear from eBay I buy bags of nuts and bolts and just about every thing else from flap discs to cutting discs I've saved loads over the years .👍
@bennettscustomsco4 күн бұрын
Does seem like the best way!
@bruceschneider43595 күн бұрын
I agree with you about polished aluminum. It gets way overdone on a lot of hot rods. I prefer a satin finish. Hadn't tried the wax but I will, now. Thanx!
@rickmeisch6435 күн бұрын
Such nice precision work . The long bracket for the generator was the interesting one👍. Thanks for showing time consuming shop work you do a fine job.
@qdusen5 күн бұрын
Loved hearing about your 4x4 background and am excited to see the International project. My interest is mostly 4x4 stuff and I owned a 1969 Scout 800, 1971 Bronco, 1974 Bronco and a 1997 Land Rover NAS Defender 90. My current project is a 1994 80 series Toyota Land Cruiser. I love looking at hot rod and street rod stuff, but not really interested in owning or building one.
@bennettscustomsco4 күн бұрын
Definitely a good past line up! Hope you dig this future one!
@johnvanhal24505 күн бұрын
I'm in for the 4 wheel drive. I subscribed for that VW with radial engine, I'm not so much into the hot rod scene. So when that VW is finished, I'm gonna stay. It was my plan to leave after that originally, though I love the fabrication that you do. Just don't like those pre war cars.
@bennettscustomsco4 күн бұрын
Welll Hopfully the traversall will keep you around for a bit!
@murdoc65014 күн бұрын
The custom brackets are fantastic! Anyone can buy and bolt on, but bespoke pieces are what sets your builds apart from the rest! When your plasma table arrives, you're really gonna go to town! Ben's gotta be losing his mind, the roadster is so close! Go Bennetts Customs, keep moving forward!
@bennettscustomsco3 күн бұрын
Always nice to create pieces that are different from the rest! It’s getting really close now
@Dave.AtomicRatRods4 күн бұрын
Great video Jordan! You've given me some great ideas for my 31 Model A build. I love the Popeye drop axle shirts, please let me know when you have tall sizes! Dave
@bennettscustomsco4 күн бұрын
Will do Dave!
@airecraft14 күн бұрын
You may or may not use a hole enlarging taper reamer . We discovered them years ago I’m not sure what brand I have but it’s a game changer for enlarging holes in steel
@bennettscustomsco4 күн бұрын
Very true! I usually use those too!
@timferriss9055 күн бұрын
Nice work Jordan. Have you tried doing your own powder coating on small brackets and such? I no Lee on lg speed has a little oven for his. (Q) where do you get your tyres from. I ment to ask you on your last vid when you did your uncles car. Ugly ducking is nice as a people carrier. You will turn into a swan I’m sure. Cheers best wishes. Tim.
@bennettscustomsco4 күн бұрын
Hey Tim! They usually come straight from Coker! Free shipping usually too
@bennettscustomsco4 күн бұрын
I like the idea of powder coat once you know you will never need to modify something
@timferriss9054 күн бұрын
Cheers thanks for the reply.
@timferriss9054 күн бұрын
Jordan. If you go back six months on lee’s channel you will find the powder coat it’s in with the Fargo truck! All the best.
@timr.31084 күн бұрын
The International would be a great build.
@jorgemercatali931917 сағат бұрын
Beautifull build mate
@anthonypittaway28154 күн бұрын
great video as always lads, just be careful wearing gloves by the rotating equipment/ sanders. in no way am a telling you guys how to suck eggs, but I've seen my fair share of accidents from it! hate you see you guys have a down day from it
@bennettscustomsco3 күн бұрын
Thanks mate
@joecioe85664 күн бұрын
I enjoy seeing the pieces, parts and brackets being made by hand, I also can't wait to see you take it to the nest level with the fast cut. I love the international, I totally understand how you couldn't pass it up. Love the channel and always love seeing what's next.
@bennettscustomsco4 күн бұрын
Right! Thanks Joe!
@garyfairbrother55325 күн бұрын
Of all the creative and clever things you do your unique, custom, “Hot Rod jewelry” is always my favorite. You are never limited by unavailable parts for your visionary goals. Steel has never looked so good!
@bennettscustomsco4 күн бұрын
Thanks so much Gary! It’s always fun turning scrap steel into something that’s both eye catching and functional
@animal_engineering5 күн бұрын
Internationals are Definitely not ugly, well the Metros anyways, HA HA
@bennettscustomsco4 күн бұрын
Hahahah
@daleking85294 күн бұрын
Simple but elegant on the mounts! Looking forward to the Binder series! Take care.
@bennettscustomsco3 күн бұрын
You and me both!
@rustyrodgarage26864 күн бұрын
Nice work.now that you have the new CNC machine it should make easy work of these brackets
@bennettscustomsco4 күн бұрын
That's the plan!
@billthomas90365 күн бұрын
Love the binder!! can't wait!
@JimGalley-l3k4 күн бұрын
Are the valve covers and coil mount made in magnesium? Sure looks like it.
@bennettscustomsco4 күн бұрын
That’s the look we were going for! Aged aluminum
@tradrodsandcustoms5 күн бұрын
You neee a rotobin! As far as filling it, i always keep an eye open and buy CHEAP
@andrewlitchfield48433 күн бұрын
The International Copper Kettle will be cool, will look ace on 900 x16 and be a cool tow rig, camping and off road vehicle! Please say it's going to be diesel swapped too!!❤
@bennettscustomsco3 күн бұрын
At this stage I believe it will be!
@andrewlitchfield48433 күн бұрын
@@bennettscustomsco Cummins 6bt by any chance?
@stevetowers82825 күн бұрын
looking awesome...need a Popeye T...when are they for sale?
@bennettscustomsco4 күн бұрын
Next week!
@bryceonysko64794 күн бұрын
You go man it looks cool😇😇😇😇😇😃😃😃😃😃
@mikedaniels16974 күн бұрын
You do awesome work looks really good where did you say you got that router tool from?
@bennettscustomsco4 күн бұрын
Temu
@michaelanderson37715 күн бұрын
The Caswell black oxide kit to protect and treat the metal brackets is a great option also for protection of those cool looking braces.
@michaelanderson37715 күн бұрын
With regard to hardware and std imperial and metric fasteners, speak to Wurth and see if they will run a KANBAN replenishment system for you. Weekly or fortnightly resupply of stock items nuts,washers, O-rings and bolts screws set screws etc as well as PPE and hand cleaners and sprays
@norego62375 күн бұрын
i worked in a place that used worth bolts , i dont rate em pretty easy to snap .
@michaelanderson37714 күн бұрын
@@norego6237 they sell bolts from many manufacturers not just their own made product. They offer a KANBAN replenishment at a very reasonable price including PPE and sprays and lubricants. I used them at my last factory for o-rings and some fasteners but had a bolt manufacturer in Dandenong and Adelaide bolts make some after Ajax went bust in 2019. BCS also did the same.
@glennstatham9605 күн бұрын
Hope the Axle Dropping T-shirts are $40, I'll buy one!
@Dirtbagoutdoors-qh4nk4 күн бұрын
Super clean work as always
@davidhyson99103 күн бұрын
"Built not bought" ✅️
@akm06144 күн бұрын
Those 3-bolt carb spacers are sick! Do you mind sharing where you got them?
@bennettscustomsco4 күн бұрын
They are from Pete’s Speed shop hand here in Australia- he does ship all over the world.
@akm06143 күн бұрын
@@bennettscustomsco Dude, awesome! Thank you!
@garysargeson25394 күн бұрын
Very tidy mate, your detail is “Killa” 😎😎😎
@bennettscustomsco4 күн бұрын
Thanks Gary!!
@floridian71434 күн бұрын
Thanks for sharing, nice design and build. It doesn't look like you have very much adjustments in the belt due to pully's being lined up from this view?
@BoxcarsGarage5 күн бұрын
Where did those cool plug wires come from? Love the old school detail applied to that 302!
@timferriss9055 күн бұрын
I have them on my triumph. I don’t remember who I got mine from it was at a show in England . So what I’m saying is there must be somebody trading them near you.
@bennettscustomsco4 күн бұрын
Noble speed equipment. Talented man and very nice to deal with
@BoxcarsGarage4 күн бұрын
@@bennettscustomsco appreciate that
@seanmcconomy7113 күн бұрын
I have a Wurth rep that visits the shop next door and checks in to see what I need. To be honest the quality of their fasteners has honestly down in my opinion. A pet peeve of mine are washers that don’t fit. I have had good luck with McMaster Carr, don’t know if they are down under or not.
@CobwebGarage5 күн бұрын
Great video. I'm interested in the windshield posts on this roadster, which seem to have changed. 😉Will that be in a future video?
@bennettscustomsco4 күн бұрын
You bet! Keep your eyes peeled
@billthomas90365 күн бұрын
Very Very nice!!
@deltan9ne3062 күн бұрын
Too many speed holes for me. I sure do appreciate your work and the effort you put into filming your work though!
@eddydelatorre19934 күн бұрын
Copper kettle!!! Fuck yeah!! 👍🏼
@bennettscustomsco4 күн бұрын
Yup!
@johnkranz40044 күн бұрын
Nice work Jordan Kool international
@bennettscustomsco4 күн бұрын
Thanks!
@norego62375 күн бұрын
got a link for the router i think i need one
@bennettscustomsco4 күн бұрын
Temu - air router
@noblespeedequipment4 күн бұрын
Simple and clean great job man !
@bennettscustomsco4 күн бұрын
Thank you my man!!!
@William-z8tКүн бұрын
Those air cleaners though! Where'd you find those?
@baconcreek6092 күн бұрын
Another channel I need to watch for education purposes