Transforming An Old Honda Civic Into The Ultimate Lykan Hypersport Supercar!

Source: tanna dhaval
Transforming an Old Honda Civic Into the Ultimate Lykan Hypersport Supercar!
If you are the owner or if you want to be featured please contact us at: [e-mail]
We will follow your request as soon as we receive your message.
Copyright disclaimer section 107 of the Copyright Act 1976. "Fair use" is allowed for purposes such as criticism, comment, news reporting, teaching, scholarships, and research.
We are not affiliated with the businesses whose products are shown in this documentary!

[@omgiamlmao9730]

Why do some people have to point out what their doing wrong or did wrong. At least they put in the work to make their dream a reality unlike people that didn't even try. Great work on what did with ur hands guys

[@ГеннадийСорокин-е9ф]

и да и нет. у кого то мечта - купить машину, а у кого-то испортить то, над чем думали лучшие умы из Хонды. Лично мое мнение, что ребята молодцы, но они ничего не получили, кроме дополнительного веса машины и снижения управляемости. Очередное индийское кино, лишенное смысла

[@Harvz78]

To make it better. 🤷‍♂️

[@Harvz78]

That's like twice the weight of the Honda Civic now. It's all metal.

[@TomHandmadeCreative]

@@Harvz78 thanks for watcing video

[@TomHandmadeCreative]

thanks 🥰🥰🥰🥰

[@EdWin-mw1br]

Wow. Everyone who touched this build is a master at the craft.. impressive build.

[@TomHandmadeCreative]

❤❤❤❤

[@tigeruppercut2000]

No it's not... he's using a fucking stick welder, which you cannot control the heat well compromising it's strength. Not to mention he fucked up every aspect of it's structure integrity by cutting off the roof

[@karenc5696]

Some people always think it’s all about making a car fast. Get outta here with that. This build looks LOOKS Fresh!

[@iancrozier8068]

Despite all the great work, design & attention to detail in this build, it is still a Honda Civic but I would guess heavier. No denying though, the dedication and skill to make a one of one cool looking ride. Well done guys.

[@ironhorsehero1988]

What you guys have achieved with rudimentary tools is nothing short of astounding, I know people are commenting on weight, drive, power etc but do you know what, who bloody cares, it looks fantastic. 👍🏴󠁧󠁢󠁷󠁬󠁳󠁿

[@ednan7]

Heavy build, great fabrication.

[@TomHandmadeCreative]

🥰🥰🥰

[@No_Transitory]

These guys poured their hearts into this build. Masters of their own craft! I'm surprised more people aren't special ordering these... Its a beautiful hand crafted vehicle.

[@TomHandmadeCreative]

thanks for watching video

[@nobass_stub1394]

Wow that was ummmmm... Yup I'm speechless :)

[@TomHandmadeCreative]

thanks

[@cloudpandarism2627]

@@TomHandmadeCreative i smell sarcasm. 😆

[@Mambafpv]

i am extremely impressed with the quality of work in the team. not your typical bangla banger cowboys, these are pros!!! well done

[@TomHandmadeCreative]

thanks for watching video

[@jaimeroberto2419]

No two are the same.... This is 1 of 1..... 👍👍👍👍

[@TomHandmadeCreative]

❤❤❤❤

[@natoagostini5082]

Maravilhoso trabalho parabéns 👏👏👏👏👏

[@rommelestrada-t4f]

Now in regards to Creative aspects you guys are totally on point,being that the Car is fwd and the Centre of Gravity has changed along with the Overall weight of the Vehicle I think DEFINITELY some forced induction IS needed. Can't be a Supercharger because of Space so Turbo with about 16-20lbs would be good running Power to Weigh ratio now

[@TheNorthernmunky]

Wow that is insanely beautiful and should be bought in to production for the market

[@TomHandmadeCreative]

[@yusufabrahams4179]

Creativity & Engineering to a next level.......

[@TomHandmadeCreative]

❤❤❤

[@Vinhhienvlog_1983]

Really like to see your rims..you do amazing car tuning.

[@robertevans9354]

If you lived there in their country driving the roads it would be the perfect supercar . None better due to low cost high profile status it offers , rough daily driver from the start . Best car in the world under those circumstances, bravo to all involved , I am gobsmacked by it , simply mega as Scheme would say .

[@IanLoughorClarke]

Well done guys. I love it. You did a fabulous job. Where did you get the head lights? Did you do a drawing on sketch up or Autocad first to get the measurements correct?

[@SheikhWasif-p9x]

With a proper base and resources god knows what they could do.❤ keep it up guys. Great work🎉

[@That1PinoyDIYdude]

Awesome craftsmanship skills. Now just needs a built turbo K-series and AWD conversion in that Civic chassis to back up the looks. 🔥👌❤

[@cesarcalado6810]

Congratulations! Very talented and creative team.

[@nicholassoon1137]

Great video of putting your creativity to limitless… I enjoyed watching this video… thanks for sharing…

[@peterbowling2410]

It’s an amazing piece of engineering but I had the urge to send them a MIG welder. Doing all the panel work with a stick welder is pretty keen. But very well done.

[@pashmak_pishi]

اسکاربه این کارگران که باکمترین تجهیزات توبدترین شرایط بهترین راساختن👍

[@barokahnursery]

Amazing hardwork

[@Uswesi1527]

Indeed, a unique masterpiece

[@TomHandmadeCreative]

thanks

[@user-wc1bc1yf8t]

Great job, it doesn't matter what base they used. That's their choice using what they have. Just my point of view.

[@TomHandmadeCreative]

thanks

[@viralsvibes2418]

Proud to be an INDIAN🇮🇳🇮🇳 He is from India🇮🇳 He also made a Lamborghini terzo at home He have a handmade Lamborghini terzo

[@lucianofinardi7222]

Looks great. I hope the car kept its structural integrity.

[@TomHandmadeCreative]

[@karenc5696]

Awesome build!

[@TomHandmadeCreative]

thanks

[@pngweeklywildnews7151]

From all DIY car Transformation, this guy's a heavy

[@hardikpatel7550]

Tanna dhaval from india gujrat...proud moments bro🎉

[@TomHandmadeCreative]

😍😍😍

[@BayuIriantoBayuIriantoAmbawaRa]

Wow....creative job

[@karenc5696]

Great job guys!11 ❤

[@vertstang123]

Very impressive craftsmanship, but at the end of the build you have a Honda Civic with two two tons of metal work welded to it.

[@magnetic480]

This is a honda Civic. It's more of an art than a supercar, great work, tho.

[@PaulRuttiman-sh5rv]

And abracadabra you still have a Honda Civic, only a SLOWER version..😂😂😂😂😂

[@ChicoBarz]

Literally 🤣🤡💯

[@TomHandmadeCreative]

[@gerardomusano6919]

This looks like watching the chop shot on tv 😂😂

[@fyathaphenom]

i fell out when they added the flames🤣 this thing sounds like a dirt bike. All that extra weight its gotta drive like a boat.

[@geja8708]

Well done

[@user-dx2wr3mu1t]

Nice job, keep it up guys.

[@TomHandmadeCreative]

🥰🥰🥰

[@METEORA_47]

If them have enough modern machine,we will know what will happended next...Master

[@americanakita]

Awesome but I do wonder if those cars are save to drive in? What happens when they get involved in an accident?

[@kamielbuize4048]

painting without a mask... smart very smart 😱

[@jameelali1266]

These guy have talent and ambition.. others only procrastinate because of their lack of ability and ambitions.. not everyone is an Elon

[@sonnyscibilia4874]

I can't wait to see next video when is ready to be lifted on the dyno machine and How many horses they put on front the car

[@TomHandmadeCreative]

thanks for watching video

[@DiscoveringSpain]

Fine example of your skill well done, invest in a mig, less panel warp less filling

[@bdcarroll415]

These guys are masters. Great designers😊👍💥

[@TomHandmadeCreative]

😍😍😍😍

[@Travelwithvikas]

Made in India.....by Tanna Dhawal....Gujrat❤❤

[@laszlo5828]

Nice👍👍

[@TomHandmadeCreative]

🥰🥰🥰

[@nobertalino5383]

How many day, for this project?

[@martial5899]

i'm curious to know how much does the car weigh !

[@xeff01]

Good work.. but for me you should have use fiber glass it is more lighter than sheet metal..

[@Karpofcarp]

I agree, but I also don't care cause it looks sick

[@andresdia968]

but you didnt ...prolly never will

[@fernandop.3883]

what sheet metal? those where metal blocks :P

[@TomHandmadeCreative]

thanks for watching video

[@nova16543]

Original tannah dhaval video

[@ayetreybetrippn8064]

WHEN U BROKE/POOR BUT WANT THE FINER THINGS IN LIFE LOL NICE WORK I HAVE A HONDA DO ME NEXT

[@Nova-m8d]

It's a Hondugatti

[@panduan_hme]

That'll be so heavy that probably it won't reach 90kph.

[@andresdia968]

make one that will.....well be waiting

[@TomHandmadeCreative]

190km/h :))

[@waynesmith-r8c]

it looks like a super car,but it certainly will not perform like one

[@satyajitdas3373]

Wowwwwww outstanding bro ! Customisation expenses ???? I only know,s about one and only single LYCAN HS FROM FAST & Furious Franchise!

[@TomHandmadeCreative]

thanks for watching video

[@sarahthompson1160]

What sort of high speeds are they dreaming of in a Honda civic?

[@TomHandmadeCreative]

car for display only :))

[@davidshurterfoundermembero2885]

Honda civics are actually one of the best tuner cars with an unbelievable amount of aftermarket mods and the Type R engine is a masterpiece which revs really high. The first fast and furious film shows civics being tuned like this as they are the cars used for the hijacking.

[@robertevans9354]

The passion the quality they all leave me amazed excited and envious .

[@rafalfilipiak1021]

love those painters! 😆😆😆

[@slartybartfast5368]

Honda Civics are mega slow already, and you’ve added much much more weight….it must be hilariously slow now….

[@AndRe-rw4rr]

agak Laen prindavan ini 👏🏻👏🏻👏🏻

[@Kushmosha]

Regardless of the disasters workmanship i commend them for the Everett

[@peterdur5596]

😮😮😮Perfecto from Ausria...

[@TomHandmadeCreative]

🥰🥰🥰

[@arsadhussin1002]

This is the most heaviest sport car ever made i've seen so far hahaha...

[@sierracoswort]

Ovviamente tutto omologato😊

[@abdulmunafshaikh26]

YOU HAVE LEFT THE VEDIO IN COMPLETE AS TO BE CONCLUDED, WHEN WILL YOU CONCLUDE GIVE DATE PLEASE.

[@Bylly-e2w]

Awesome team and the car looks fantastic, congratulations on the work, Brazil 🇧🇷🇧🇷

[@TomHandmadeCreative]

thanks

[@ezekieleffiong2095]

Nice job guys 👍 what's the millimeter of the pan you use for the car body.

[@fernandop.3883]

probably 10mm +- :P ( armour plating )

[@zayyin-ul-quran8423]

How can I contact you? I also have a Honda City Car. I want to modify him.

[@thecapedgremlin0001]

8:59 there's a reason why a supercar costs a minimum of just under a million dollars when the right materials and drive-train are used...!...I do clap your blokes efforts...!

[@TomHandmadeCreative]

thanks bro

[@dennis-ju1gm]

That body work is amaizing. The flames though🔥🔥🔥🔥

[@TomHandmadeCreative]

ok

[@arthurgroncki8993]

At the end of the day it’s still a Honda civic

[@michaelb.42112]

I love the trend of turning average, super reliable Japanese cars into works of art. I'd rather own one of these as a driver than a real super car because they are notorious for having problems if you don't drive them, and it's just impractical to drive a super car as a daily driver, not to mention I'm broke, LOL.

[@jeoffreymatake8288]

Same here. No high maintenance costs. You leave an impression without the fat pockets and it's a cheat code for us who can't afford.

[@TomHandmadeCreative]

@@jeoffreymatake8288 thanks

[@michaelb.42112]

@@TomHandmadeCreative Thank you !!!

[@Guidoc73]

The car looks amazing and you guys are fantastic workers. 1) Next time try use light components 2) More powerful car ( in Italy you can buy 4.5 liter Mercedes engine for a couple of euro. 3) Create something that can be street legal. Bravi anyway.

[@TomHandmadeCreative]

thanks bro🥰🥰

[@anthonysullivan4311]

Should have J swapped the chassis before making the body. Thats some major weight added.

[@fariqzura]

Im watching at 2.0 speed..u?😅 Salute for the spray painters they didnt had mask on .

[@laurent69]

Magnifique job

[@TomHandmadeCreative]

😍😍😍😍

[@Kustommotoz7044]

Tanna dhaval bhai video 😂😂😂

[@jarnosaarinen4583]

Great Job!!

[@TomHandmadeCreative]

😍😍😍

[@UNlKby]

It's strange that you didn't weld the mirror housing from reinforcement🤣🤣🤣🤣

[@alangriffin598]

I cannot believe nobody even mentioned that it is two different cars the first was a left hand drive the last one a right hand drive also it went from exhaust pipes on the outside to middle and then back to outside but at least it did look good at the end

[@TomHandmadeCreative]

it is a car

[@kuzzfanai8669]

Nice🎉

[@foxpicchannel7869]

Poor craftman especialy on body work😂

[@97sirdelsol]

no mask while painting in the boot is wild

[@sergioa.s.5771]

Bro, they are moving sheets of steel while wearing sandals.....

[@TomHandmadeCreative]

[@simontuffey6655]

The body filler must weigh as much as the sheet metal! don't it would do too well in a crash, bloody good vision and does look amazing

[@TheSavageRepairman]

Beautiful craft! It would seem with all that metal though that it would be very heavy. Great video. Can't wait to see the finished product. Well done.

[@bOOmbOOmProd]

Ok so yea like good on you for doing something but not all things are worth doing. Case in point. There is 0 chance that thing is not shaking apart going at highway speeds.

[@tolgashn3294]

0-100 45 dakika arabanın toplam ağırlığı 5 ton oldu :) :)

[@TomHandmadeCreative]

[@adamw4023]

Cool, but why is the base so crappy - take a V8 BMW or Mercedes, not a front-wheel drive Honda

[@breakshot7451]

boooyy, i love the , i make it from scratch ,or not be scared of any kind of work, but you really can argue about the end result. have to laugh about, that i ve been told, what i have to see and i see that there is nothing as i ve been told;))

[@rollieb8944]

Cost would be the greatest issue

[@andresdia968]

you shoyld do it w a better base and show em how its done

[@jerm215]

It's cheaper

[@DiscoveringSpain]

LS V8 not a crappy Merc or bmw

[@peterkelly7226]

😮 wow amazing

[@TomHandmadeCreative]

😍😍😍

[@aldiaz8547]

Heavy as tank

[@TomHandmadeCreative]

thanks

[@MusicMAN-lr9pq]

this is one heavy car,, heavy as a tank..

[@andrewatson7885]

@ throtl. What do Mickey and Quin say to this idea?

[@gentelal8113]

And the problem continues. These countries neglect the issue of the security and safety of workers and do not use any equipment for it

[@TomHandmadeCreative]

🥰🥰🥰

[@JuanLuis-z9n]

Beautifol werc guys profesional

[@Travelwithvikas]

Whole project is uploaded on india youtuber Tanna Dhawal's channel

[@yruslan]

Fake radiators is a icing on the cake.

[@UNlKby]

Кто-же делает выхлоп последовательно, выхлоп делают параллельным.

[@farhanzahari9590]

0 to 60 in 3 business days

[@ChicoBarz]

🤣🤣🤣🤣