Transforming Old Ship Sheets Into Heavy Duty Truck Tire Rim |Easy DIY Rim Plate from Old Sheet Metal

Transforming Old Ship Sheets Into Heavy Duty Truck Tire Rim |Easy DIY Rim Plate from Old Sheet Metal

[@timmyfullarton2160]

Dude holding that chisel got balls of steel !!

[@user-fx2zf9oi1v]

... скорее сварщик имеет стальные лёгкие

[@captaingoody]

Nope... he's just very hungry

[@1BigDaDo]

​@@user-fx2zf9oi1vlmao

[@gordbaker896]

Indeed. Crap 'cold' welds that will peel away like that.

[@user-vy4xx2qp3d]

Nope... no brains

[@mugshock1234]

Ya this looks like a REAL EASY DIY rim plate job. Gonna try this tomorrow on my back porch.

[@desmondauffrey7823]

SAME HERE !!!!

[@amazingdecks1]

Excellent work! This is obviously a modern factory with the latest safety standards and material handling equipment. I just wish you'd shown the final steps of precision alignment after welding, balancing then painting.

[@OakLawnSpeedShop]

State of the art manufacturing technology…….

[@RossD8]

And the next time I pass a truck on the interstate, I'm hoping the rim was made by these guys!!!!

[@donaldhoot7741]

LOL! Any sarcasm here?

[@perropulgoso3351]

Glad to see them taking all the necessary safety precautions 😢

[@valentinsandu261]

lol good one :)))))))))))))))))))))

[@Brettmlyons]

They are wearing boots instead of flip flops. Thats a big step lol

[@FernandoFlores-xi3mh]

Yeah i am a HSE supervisor, and this is pretty cringe...

[@Demop_VW_garage]

life is cheap ;)

[@dadsvespa]

Strong men swinging those hammers too. Amazing to see the hull of a ship, being turned into wheels. Hard workers.

[@77gravity]

First time (in these type of videos) that I have seen someone in safety boots.

[@praetorianpatriot3267]

The Eastern Indian people are proof that a good work ethic pays the bills and develops a skills that last a lifetime. Blacks in America should take note......

[@BigBone4u-fn3dx]

Talk about getting along with your co-workers is a must. Damn.

[@sirjeralvilleda]

Guy cutting with a torch is gonna go blind in no time. Stay safe out there 🙏

[@envitech02]

I think the word safe is not in their vocabulary.

[@jpnphom5470]

Here come people watching, criticizing safety and crapy workplace and yet they refuse to leave and watch the German metal fabrication shops...addicted to watching this channel and here they are. I'm enjoying this 1940 style.

[@andrzejszyszo4284]

You mean 1840 I think...

[@timothygeiger8271]

The other comment was more accurate, 1840 style.

[@glenjamindle]

That dude has a lot of trust in the guys swinging the sledges

[@williamhudson3366]

Dam it's like working on the railroad back in the day

[@Ever443]

I was thinking the same thing. Whew not for the faint of heart

[@51-FS]

He gets to swing after lunch...

[@unclexeres]

One miss and he's a cripple.

[@user-jk9jg7nt9x]

That is how Real Men work. West used to have them, they became extinct in the West, right around after WWII.

[@mauriziograndi1750]

It is just amazing what they can do with what they got. Plus children hanging around there!

[@user-jk9jg7nt9x]

Very nice. Caution: Sissy men may faint after seeing real Pakistani Men at work, with Sandals and All. Not afraid of anything. Long live our Country of Pakistan. God Bless Pakistan. Pakistan Zindabaad.

[@user-yr6kc4fo1w]

Это лучшая серия из программы "как это сделано")))

[@maryfreeman2917]

We don’t need no stinking steel toe boots. We’re going to work in sandals. Weld in sandals.😂

[@gliderider7077]

How Americans used to work when we built this country, then came Unions and OSHA and nothing gets done now

[@alexandrej5066]

​@@gliderider7077 Agora é feito na China desse jeito.

[@TheSlystefan]

No welding sparks will get caught in their saddles 😂 boots are to dangerous

[@dunk5647]

At least they are wearing that much in their feet

[@papuadiwakar6635]

​@@alexandrej5066😢

[@frankbullitt4556]

Incredible way to remove welds. Very trusting buddys. You men are well skilled engineers.

[@gordbaker896]

Those are 'cold' welds or they would not peel away like that.

[@xXRedyzXx]

"Are they just hacking the welds away?? really??"

[@SixGunTodd]

Love those clean metal welds 😮

[@mbsnyderc]

it's clean were it's getting welded.

[@calvinhaygood292]

For those concerned about the true on these wheels, remember that they run on terrible surfaces anyway, rarely getting over 50 mph for any length of time. I doubt one could tell the difference between one of these and a Freightliner or Peterbilt,,,taking into consideration the condition of the roads there.

[@hktundra]

the truth about these wheels can be seen at 8:21

[@davidjacobs8558]

@@hktundra those are the OEM's. they used much thinner material.

[@xy_iron]

i just hope they dont export those wheels anywhere

[@phuturephunk]

@@xy_iron I would bet all the money I got that they end up at the local marketplace and are bought by locals. Same with all the stuff you see in these vids. These are local people working for other locals in their own area.

[@donaldhoot7741]

They make junk! Stop making excuses for this rubbish!

[@theotheleo6830]

I can't believe the guy was just eyeballing the hole and bolt-hole patterns, instead of measuring. This means that each rim is different, and some will not fit properly, if they fit at all. Not to mention that this causes the rims to be unbalanced. Then, they use a destroyed rim to weld onto the unbalanced piece without checking for defects. Whoever is buying from this business is putting lives at risk.

[@jefftoll604]

I think there is line up mark on jig.

[@earlbrown]

I like how the bolt pattern was punched relative to the punched I.D. Then, on the lathe, they turned a new ID to match whatever the 4-jaw chuck was set at (with no dial indicator). ...and not any kind of precision measuring tool in sight.

[@nisfunc4]

real man welding without gloves

[@MA-iv7ol]

How the heck were the lug stud holes aligned, don't tell me he did it by sight! Amazing work, would love to know the psi of those presses, wow!

[@safdariqbal567]

8😅😅k99

[@steffen7478]

I was wondering the same thing

[@timothygeiger8271]

My guess is they had the holes marked off camera.

[@Abbamonto]

There had to be a jig

[@markmonroe7330]

Looks like he was using a dividing head and rotating to each "click" on the rotation.

[@TS-1267]

... "… WHERE'S THERE 'MUCK' THERE'S MONEY…"…Brilliant Video 🖖🏴󠁧󠁢󠁥󠁮󠁧󠁿🥸

[@rentonarc]

The aim with the sledges were amazing

[@chrisg5894]

Always nice to have kids walking around a metal shop with flip flops on

[@turtle5050]

First minute of this video would make any OSHA inspector have a heart attack. Head, hands, and feet all in the path of possible destruction.

[@unclexeres]

Safety first, I mean last. I'm in awe of their accomplishments being that their bodies are being used up for every item they make.

[@mrsqueakthecat.8061]

Well, it is a job you will never grow old in.

[@getchasome6230]

Safety fourthst

[@Francois0810]

Эти парни если что, так и космический корабль отремонтируют. Причём в шлепанцах и без защитных перчаток! Запчасти если что, найдут на ближайшей свалке металлолома!

[@garystarkey6255]

Gotta love that the dude is stick welding with no gloves, no welding jacket, sandals on and a flemsy shield he has to hold in front of his face. Thats rough.

[@sautorresperez9014]

الأصدقاء يقومون بعمل ممتاز مبروك عليكم من المكسيك

[@paulday-lh5mx]

Wow. Incredible, and wearing flip flops.

[@gdelfs6942]

Dang these men get some work done! Bet they sleep well at nite

[@QlipsGuimel]

Increíble labor de estos camaradas.

[@gizzync1525]

this is the first 1 of these types of videos i've seen where they are wearing actual boots

[@bendenisereedy7865]

I've twice visited Gadani Beach where they cut ships into pieces. The steel gets used for various products including rebar for building. Each breaker has a big shed full of all the valuable stuff like brass, some of which is sold to tourists in Karachi.

[@D-B-Cooper]

First time I have seen boots.

[@rlprgp62]

Load rated and D.O.T. Certified....Nice work though. Great to see those old ships repurposed.

[@pandiindjenatanaeld621]

Hand and arm vibration on a different level.

[@mrsqueakthecat.8061]

Well, this rather explains why my truck wobbles going down the road.

[@METALxMASSACRE1]

Yah this video fully explains why Your truck wobble down the road…..

[@mrsqueakthecat.8061]

@@METALxMASSACRE1 Yes. Because the rims were fabricated from junk ship parts by hacks.

[@BigEightiesNewWave]

Amazing that a blind man is able to cut out those circles

[@Grishko_Plutishko]

Мля, у меня пальцы на ногах сжались пока начало смотрел 🤣

[@user-jk9jg7nt9x]

That is how Real Men work. Not afraid of getting hurt. West used to have them, they became extinct in the West, right around after WWII.

[@tomaszdudek8090]

Król bez plusa I minusa.Walczcie o prawdziwego minusa I wsparcie maszyn.

[@littlesquirtthefireengine5478]

That punch is brutal

[@pardalbartz]

They use Old, BROKEN steel rims (possibly due to fatigue). And "renew" them by welding "new" hubs made from ship scrap plates (some visibly severelly corroded and unknown fatigue cycles, not to mention which material should be). Looks like they are keeping their business! Can use them again some years afterwards!

[@wollywolly2734]

OSHA IN DA HOUSE !!

[@sautorresperez9014]

Congratulations friends you do an excellent job greetings and blessings from Mexico

[@joegilly1523]

Hard working guys.

[@Arifinsyahpratama]

Becarful at the work

[@spencersandman6728]

Akin to the type of work British women were undertaking in factories during the 2nd world war. Without them we just might have lost!

[@carloslopez-qr4sd]

I like your Videos Vato 👍🏽

[@mikescaffo4850]

That dude holding that tool while they swing those sledgehammers has balls the size of cantaloupe

[@hofthomecrap9534]

One screw-balled video w/ MAJOR jump from 08:20 - 08:21!

[@swaran5454]

Bahut acha kaam kiya hai bhagwan apko khush rakhe. Watching from India

[@DontCallMeGarage]

holy shit!! someone is wearing shoes!!

[@CaptHollister]

Working conditions straight out of the industrial revolution of the 1700s.

[@richardfitzwell6579]

I'm sure those will balance out fine

[@Shanidar1]

You will never find out.

[@CaptHollister]

...and thanks to the retreaded Chinese tires that will be fitted to these rims, comfort and safety are guaranteed.

[@meandmyself3007]

They never waste an old broken part

[@alantaylor353]

Now that's MANUAL LABOUR.!!!

[@edisonromero7413]

Muy bien lo q hacen les felicito

[@briant1319]

Big pile of dirt in the rim when the weld is being finished. No problem, I think I recall that dirt reinforces welded joints

[@steffen7478]

people talking about the guy holding the chisel. Nah, its homie in the purple pants. thats his leg in the line of fire. if himself or the other guy swinging the sledge misses, that shin is ruined

[@Nza420]

When I watch videos like this, I am thankful for my existence.

[@AdventuresOutdoors]

That all looked OSHA approved.😂

[@chiprenner3800]

Very good I like the shop sounds

[@JoeBaR-202]

According to the clickbait picture ,they make aluminum wheels outa steel plate 😂

[@guerranapaz6246]

Admiro o trabalho de vocês, parabéns!

[@sirleilima-cm9ls]

Eu queria ir para teu país aprender trabalhar com perfeição assim que nem vocês. Aqui é Brasil.

[@alexandrej5066]

Os caras são fera, fabricam de tudo. Além de não serem dependentes do estrangeiro isso deve movimentar a economias local. Que Deus abençoe quem trabalha.

[@user-on7bp1yz1y]

ประเทศเจ้าทำได้ทุกอย่างจริงๆ

[@jaberab1277]

Wow very accurate and safe I won't take these things for free

[@GreatSkills8]

Most Beautiful Video #Greatskills

[@Wildbill980]

Not a measuring device to be seen anywhere

[@joseaugustoalves7461]

Vocês são os melhores ❤

[@martynjames5963]

Being surrounded by wheels, wouldn't be hard to create a truntable for welding.

[@mikesahle1193]

Thank you 🙏 for hard work 😓 small but effective 👍☝️and 👍🎥👏👏👏

[@CleanenvironmentforPalestinian]

He so brave to trust others to hit the hammer 🔨 when he holds it ❤

[@wilcals5294]

0:22 damn, this is intense

[@EnemyWind1]

The man holding the chisel should wear ear protectors.

[@paulmcnamara6325]

Great people! Just get on with the job!!🎉

[@jaymatadecorhouse9291]

These are master mechanics like Machine and more then engg.bravo men.

[@user-wc2di1tk8c]

Уста деп ушуну айтса болот ийгилик Кыргызстан салам 🇰🇬🇰🇬🇰🇬🇰🇬🇰🇬

[@jessonsalas3513]

Nice work guys.. I love this work 💪💪💪 watching from phillipines

[@boyaboya1605]

ابهرتموني تبارك الله عليكم

[@fernajo6987]

Fabuloso. Ese tipo agarrando el cincel me ha impresionado, tiene valor de acero.

[@arthurtomczak8474]

At least he has boots instead of sandals .

[@Vladimir-re3lp]

Welded rims. Sounds safe. Not even in Russia I see such crazy stuff

[@diandrarahma7709]

Not modern but full of skill

[@Someguy6571]

And death wishes. Don’t forget that

[@shortwidgets]

Every one of these rims is different and probably won't fit right. Some won't. And just welding with no prep and dirt all in the welds. 😂 Gawd

[@buddah5894]

You need to get along with your co workers at this job.

[@gonzalogochicoa6815]

Respect Mrs.

[@user-qf9th1mm5w]

0:37 У этого парня, видимо, много запасных рук))

[@user-xr8rb7wy7z]

У всех парней из видео своя техника безопасности

[@Cepera03]

За воротами просто много желающих!

[@chriscoralAloha]

Safety is number one priority.

[@bigred1247]

Thats one trusting brave sob😊😊😅

[@Colenuiogyrez]

Сталь хорошая должна быть , корабельная

[@user-fp5jy3gh6m]

Они разобрали стары корабли танкер, по этому этот мужик со стальным яицами держит зубило и 2 херачат понему😂😂

[@manhoot]

Was it done this way in the motherland?

[@williamcunningham1448]

These are the old split rims which are 100% illegal here in the USA

[@petersipp5247]

Looks like 5/8" material. Nice work guys. Bet they are tired at the end of the day.

[@raw4x]

It old ship

[@ragnarocks9121]

Wheely tired

[@nkwelder1386]

Skil dan peralatan perkakas yg hebat

[@WilliamTGM]

Wie did it like this in Germany in 1920

[@robertwilder4425]

so nice video this guy work hard and amazing jod they do , I love what they do.

[@MrVolodus]

I get it, it works but geez, when you look at some modern rims manufacturing ... it's not that there are some super futuristic tools, it's just bit of measuring, cleaning and safety added. Basically just some more advanced process. And except wages, it is maybe even cheaper. This guys got it working and stopped improving, they are ok with "good enough" - which is ok, but ffs at least that safety!

[@dalehussey2]

Safety squint for the win