Trapping - Making Pogo Anchors

[@georgezustak8435]

Another informative video. Thanks for posting. Could you show us your driver and how you make it?

[@CoonCreekOutdoors]

+George Zustak I have a video on it posted already

[@Larry342516]

You made it look easy and quick. Do you leave these in the ground or try to pull them back out? Thanks for the video.

[@CoonCreekOutdoors]

+Larry342516 no all these get pulled. many have been in use for years

[@hartfordboothe7466]

Good video, thank you. As for cutting the cable and those 20d nails: Knipex 71 01 200 cutters. Very capable for cutting wire cable, nails, fencing wire and clips.

[@markhess2686]

I've used your idea for a while , but I did mount the bolt cutter to my bench with a u bolt and it works great....just a tip....trap on

[@CoonCreekOutdoors]

+mark hess thanks

[@pigman571]

What's the thickness on them fender washers? I know there 1/4 hole, 2" od. I just need the thickness.

[@brycesnevadatrapline3712]

How do you get your pogo in the ground?

[@curtiswjackson9916]

What do you use to drive the pogo in the ground

[@stewartfrerotte7227]

Nice job. I will have to try that instead of buying anchors.

[@CoonCreekOutdoors]

+Stewart Frerotte thanks

[@markhess2686]

I'm having trouble when I'm driving the pogo in my driver slipping of about half way down and then trying to get it out and start over, any suggestions????

[@CoonCreekOutdoors]

+mark hess make sure the notch that the nail sets in is deep enough

[@ryanfurnari7610]

That's cool your using a Bob Custer j hook tool. Bob was my shop teaching in High school years ago he had one in our shop that I always used.

[@arnoldcottrell3561]

thanks for vid. been trapping a couple years love your Vid. have leaned a lot on fur prep. I'm in Ohio with a numb knee right now . keep up the great trapping

[@davemoulton8051]

What diameter cable are you using

[@johnlord8337]

Tx for doing great vids on trapping/snaring. More YT vids should be out here - of high quality vidding, and instruction.

[@CoonCreekOutdoors]

+John Lord thanks

[@tgh223]

how u get themin the ground im just getting started

[@chinchudo]

Framing nails from tractor supply and washers from F&T Correct?

[@CoonCreekOutdoors]

+chinchudo 20d nails and fender washers

[@kennethwagner6311]

I love your videos are so very informative and I really enjoy watching them up there to you

[@SJ-md6dm]

I just saw the same question from last year about removing the pogo. Sorry. What do you use to pull them?

[@phattdawgtrapping3640]

as always an informative video. thank you, keep them coming.

[@CoonCreekOutdoors]

+PhattDawg Trapping thanks

[@davidflory3156]

I made theses last year but when I put them in the ground the j hook rips out any suggestions. and I love ur videos lern a lot every time I watch them thank u

[@CoonCreekOutdoors]

+David Flory make sure that the driver is grabbing both sides of the nail and that your using 1/4'' washers and at least 20d nails

[@NSTRAPPERHUNTER]

Nice job with the video and thanks for sharing.

[@CoonCreekOutdoors]

+NSTRAPPERHUNTER thanks

[@seller559]

Great work. Nice set up.

[@CoonCreekOutdoors]

+seller559 thanks

[@merlefunk4032]

How do you get them in the ground

[@andrewbragg7187]

did you make a homemade driver or buy one?

[@CoonCreekOutdoors]

+andrew bragg I made one

[@bobhastings8260]

Do you have a video for making the driver?

[@davemoulton8051]

What kind of steak do you use to set your pogo anchors

[@BrettDeemer]

Very informative video thanks man!

[@Jeffrich308]

Could you do a video on your anchor puller? Thanks for the video!

[@CoonCreekOutdoors]

+Jeffrich308 yeah

[@benjaminrae89]

just leave them in the dirt. I used these last year and damn near gave myself a hernia trying to pull them out of the bean field.

[@parkert2710]

Drill a hole in the side and wire that up then pull the wire and cable at once

[@CaptianConstruction]

Hey buddy, as always, love the videos. Still waiting for some follow up to your tanning. You spoke of maybe doing some garment and hat making; really interested in seeing that. I have a roll of 1/16" aircraft cable; I think it's a 7x7 twist, pretty strong, decently supple. Will that size work for pogos or is 3/32" the smallest you would recommend?Jason

[@CoonCreekOutdoors]

+CaptainConstruction hat videos are coming. you can make the out 1/16'' but you may run into problems breaking if your going to pull them and reuse them

[@ignaciogrant2226]

i know im asking randomly but does any of you know of a tool to log back into an Instagram account? I was stupid forgot my account password. I would love any tricks you can give me.

[@ameerrocco2679]

@Ignacio Grant Instablaster ;)

[@ignaciogrant2226]

@Ameer Rocco Thanks so much for your reply. I found the site thru google and im waiting for the hacking stuff now. I see it takes quite some time so I will get back to you later when my account password hopefully is recovered.

[@ignaciogrant2226]

@Ameer Rocco it worked and I now got access to my account again. I'm so happy! Thank you so much you really help me out :D

[@SJ-md6dm]

Do you remove your pogo at the end of the season or just leave in the ground?

[@CoonCreekOutdoors]

+Scott Jantz I remove them all and reuse

[@yomamma6756]

Mint

[@2bonosc]

Gauge wire? 32 ?

[@soulhunter6929]

Do you have problems driving pogos in frozen ground?

[@CoonCreekOutdoors]

+Soulhunter pre drill first. no problems

[@soulhunter6929]

Where do you get the 1/4 x 2" fender washers? I could only find the 1 1/2 inch versions at Lowes and HD. So far I love them in the soils I have trapped this year. Thanks for the great videos!

[@rustedrevival7836]

How do you pull them out of the ground, if you do that is?

[@CoonCreekOutdoors]

+Wyatt Risa I made a stake puller that pulls them

[@pioneerfoodstorage]

Not needing to spend on tools - could you sell a pogo driver?

[@marioLopez-kg3le]

Your videos are great . i would like to know how you would make a gadget to pull them out dont need to be fancy .. I really thank you for iy

[@davidthomas3937]

What is the inner diameter of the hole in the 2" fender washers?

[@CoonCreekOutdoors]

+David Thomas 1/4''

[@danielsbackforty8094]

Can you illustrate setting this

[@davidthomas3937]

How do you go about pulling the pogo anchor out?

[@CoonCreekOutdoors]

+David Thomas I use homemade pullers. im going to try to get a video up on them

[@channels03]

Frozen ground?!? Will they work

[@CoonCreekOutdoors]

+mario roberto if you pre drill they will

[@benjaminrae89]

is that 7×7 3/32 cable?

[@CoonCreekOutdoors]

+Benjamin Rae yes

[@adamsinclair2784]

great video as alwaya. thanks

[@CoonCreekOutdoors]

+Adam Sinclair thanks

[@chrispaullowe]

same idea as a earth anchor?

[@CoonCreekOutdoors]

+Chris Lowe yeah just a type of earth anchor

[@s10smitty]

Enjoy your how too's

[@CoonCreekOutdoors]

+s10smitty thanks

[@andrewbragg7187]

how much is it costing you per pogo?

[@CoonCreekOutdoors]

+andrew bragg bout $0.30

[@sethbrissette4787]

what size cabill

[@REAPERMILITIAOUTDOORS]

sweet

[@mikejones-sr4zn]

How long dose 1 pogo last you and my pogos are bending at the finder washer

[@CoonCreekOutdoors]

I've had last for many seasons. A lot depends on your ground conditions

[@NovaDexter]

You don't know the worth of your content. Have you considered selling a dvd/download of you content for newbies?