Trash Found Weed Eater Leaf Blower - Can We Get It Running?

Here's another case of "why'd they throw this away"? I found this Poulan Weed Eater FL1500LE 23cc 2-Stroke Gas Powered Leaf Blower on the curb on trash day and decided to see if it can be repaired... For one thing, the pull start cord is stuck in the out position and won't retract. This appears to be a common issue with these. We'll have to fix that. And there may be carburetor problems too.
SUBSCRIBE TO CHANNEL 2: bit.ly/Guitologist2
SHOW YOUR SUPPORT
1: Donate via Paypal: paypal.me/guitologist?locale....
2: Buy Merch: bit.ly/GuitologistMerch
3: Send in Viewer Mail. (Contact Me for details at [e-mail] )
4: Purchase an ad! (Rate sheets available upon request at email above.)
5: Buy something from a sponsor and tell them I sent you.
6: Stand in the middle of the street naked screaming "LONG LIVE THE GUITOLOGIST!" Then when the cops arrive, tell them about my channel.
♠STUFF I USE
-5A Variac: amzn.to/2FNWthU
-Jameco Isolation Transformer: amzn.to/2PRv1Fa
-Fluke 87: amzn.to/2DwHjvr
-Yotec 936 Soldering Station: bit.ly/2JqB1Vw
-Sealody SSA51 soldering station: amzn.to/2DJTS7P
-Black and Decker Heat Gun: amzn.to/2DWpDhr
-Geekcreit® LCR-T4 Mega328 Transistor Tester bit.ly/2J9uLSA
-HT02 Handheld Infrared Thermal Camera bit.ly/2LXfLoD
-Solderless Breadboard: bit.ly/2stkVAq
-Breadboard Jumper Wires: bit.ly/2JowaEh
-Geekcreit® XR2206 Function Signal Generator DIY Kit bit.ly/2LYBvkb
-Contact Cleaner: amzn.to/2FVitro
-Max Professional Cleaner and Lubricant: amzn.to/37R3JY8
-Deoxit Fader Cleaner: amzn.to/2LPwtsE
♠RECORDING
-Sony AX53 Camcorder amzn.to/3MznuYp
-Canon HF M500 Camcorder amzn.to/3khlV5x
-Andonstar USB Microscope: bit.ly/2q8QIWz
-Articulated Boom Arm with Cam Mount: amzn.to/2Hlo2AX
-Shure Beta 87A amzn.to/2rNPnoW
-EV 635A Omnidirectional Dynamic Mic amzn.to/2pR8HQT
-sE Electronics VR1 Ribbon Mic amzn.to/3vkfMM8
-Tonor Q9 USB Condenser (for voiceovers) amzn.to/39fvmQp
♠RECOMMENDED BOOKS
-RCA TUBE MANUAL amzn.to/2GOBVqS
-DESIGN AND CONSTRUCTION OF TUBE AMPLIFIERS: amzn.to/2HSNMne
-Designing Tube Preamps for Guitar and Bass: amzn.to/2DK5tmt
#Repair #Trash #HowToFix

[@orionwarren4244]

You get a little of everything here - a little amp repair. A little guitar repair. Some small engine repair. And some conservative commentary. Hell Yeah!

[@Twobarpsi]

I'll drink to that 🍺👍!!

[@Superjet113]

Right on man!

[@MMMRCHPCTB]

Brad, its the ethanol in the fuel that breaks down the fuel lines. dont store them with fuel, and use ethanol free gas whenever possible

[@StillLivinginthewoods]

I had a 4-stroke Troy-Bilt weedeater (junk) do this years ago so I rigged to start with a cordless drill, and then managed to get another couple of years out of it.

[@TheGuitologist]

That'll probably be what I do when the cord breaks.

[@waynebake1123]

@@TheGuitologist Tip: You can tell a 2 cycle engine has good compression and is worth saving if you can feel the stuttering jerking feeling of the rope as you pull it out, where it gets hard, then suddenly releases, then hard, etc. So, it can be worth it to have the rope (which is replaceable) so you can get better feedback on the condition.

[@Chinaguitarsceptic]

Yey! Brad gets everything working 💪 👷‍♂️

[@TheGuitologist]

You know it!

[@yqwgjsg]

I could see the problem right off. You need to change all the electrolytic capacitors, replace the bad tubes, and do a fret job.

[@wrenchhead6840]

Ha!!! Yes!

[@frigglebiscuit7484]

it has a cool tremolo effect wheel, too.

[@jonathanstrand2474]

You would love my neighborhood Brad, not one thing in my house was bought except music gear, a friend moved outa state, fridge stove freezer, but 80% of my furniture I paid nothing for, gadgets galore, Lady across from me runs a give away wall, people leave stuff, others pick it up, and I’ve got first grabs. When I drove delivery i found both my current set of home speakers and a top of the line 4 channel vintage Marantz receiver, 125 x 2wpc or 40 x 4 One man’s trash is another man’s treasure go Brad

[@TheGuitologist]

Dude, one of these days I'll do a video of my house showing what all I got for free from the trash or from the curb, or given to me by neighbors who didn't want to fix. It's a point of pride! You get it.

[@dontonnoconfagioli]

Bravo. That was a relaxing 20’ - and relaxation is a necessity for all us non-sleepy types. We need more Pokémon-themed loon pants in mechanical engineering videos. I want a leaf blower now, and I don’t even have a garden of my own.

[@brentstewart59]

Ethanol in the fuel just deteriorates and gums everything up. Those pj's are killer Brad. They steal the show

[@brentstewart59]

I'd watch him fix anything as long as the pj's stay lol personally I rock the beer mug pj's but you do you

[@anderslinde2030]

Thanks for the video. People throw away so many things that could be repaird. Keep up the good job!

[@TheGuitologist]

Thanks for watching!

[@waynebake1123]

Just this morning I ordered a 12$ Briggs/Stratton carb for my mower. Fired it right up. Gas power equipment is really easy to service if you realize they all use about a half dozen variations of fuel management parts. Gaskets and hoses typically degrade from the shitty ethanol gas these days. You can buy gasket, hose, and o-ring sets for these but it's usually easier to buy new carbs for not much extra. These little "box" style carbs you can get for around 15$ and it pays to keep a few on hand for equipment you've got around. Adding fuel filters to the lines also helps with dirt getting into the carbs.

[@michaelszarzynski8698]

Brads small engine repair 👍 Rig up a guitar strap, like a lanyard to minimize arm fatigue

[@TheGuitologist]

I have plenty of those. ;)

[@StillLivinginthewoods]

@@TheGuitologist I bet you'll be the only guy on the block with a brocade carrying strap on their leaf blower.

[@DetroitWrecker666]

If you use Marine Grade Stabil, you will avoid the fuel lines hardening and gumming up the way they do. It's the Ethynol in the fuel that destroys these things. And every other engine in your life. That stuff eats away at the vinyl parts. Marine Grade Stabil helps.

[@StillLivinginthewoods]

That will work,.. but I just run all my small engines completely out of gas every time I use them. Normally that is cheaper,.. but with the price of gas right now, the Stabil might actually be cheaper! A small in-line shut-off valve between the tank and the fuel line works great for that too, that is what I have done with all my riding mowers. Works great for motorcycles too.

[@frigglebiscuit7484]

i saw you the comments on a pressure washing vid yesterday, and now this. a man of culture, i see.

[@grumps75]

Good to see you, Brad.

[@TheGuitologist]

You too

[@jerrystephenson1172]

Brad, if you can find gas w/o alcohol, it will run better & the carb will not get gummed up. If you can't, use fuel stabilizer.

[@payday1963]

Good job Brad!!

[@bugsbunny3488]

Hey Brad; Nice score,it didn`t seem to need much and you got a nice blower out of it. As far as a lawn care video.Lawn care shmon care,it was a good small engine`s repair video. Were glad to have your experteeze and general know how in all your wizzardrey.

[@davidplatt8915]

Great job resurrecting that leaf blower, Brad. Mine happens to be a battery powered one but I freakin' love it for all the reasons you pointed out...especially in the garage! Well done.

[@Twobarpsi]

Love it! Another great find and fix 🤘

[@gbmillergb]

My wife gets on me about dragging things home like that, a while after we was married we was driving along and I saw an old TV in a vacant field PARTS!. If you use non ethanol gas it will run for years, I have an Echo weed eater I bought in 2013 that is still going strong.

[@TheGuitologist]

Wives…they put up with us because without us they’d all eventually starve, but not before they had to mow the grass with their teeth.

[@SeanDamonGreene]

We could all use a rabbit break once in a while. It's refreshing.

[@PhilipCockram]

Good job on the repair .

[@ZPDSurvival]

I have the same one. Need to replace the fuel line. Haven't worked on it yet. Now I will watch the video. Cool.

[@TheGuitologist]

$15 on ebay. Comes with everything including new spark plug.

[@TheUniversalEyes]

Thanks for making this video because it helped remind me that I have two of them in my shed that I found on the side of the road that need to fixed. The fuel lines disintegrated and the filters are rattling around inside the tanks. Amazon has the lines, primer bulb and filters for $10

[@TheGuitologist]

Keep one and sell one to pay for the parts.

[@TheUniversalEyes]

@Filthy Peasant Why would I want a toxic lithium battery powered leaf blower? You know it takes 500,000 gallons of fresh water to extract 1 ton of lithium?

[@DyablommeHaywood]

Cool vid. I have a few small engine projects waiting for me in the garage and this motivates me to get out there and tackle it!

[@bmt638]

Really enjoy this kind of video

[@CFH08]

I'm sure most of you know this already but only use non ethanol gas in small engines.

[@graxjpg]

You rule, my dad didn’t teach me jack shit about anything like this

[@jameshalbert181]

Brad I really think you need another channel this kind of stuff. I am looking forward to your next amp referb project

[@correawi]

great video dude. keep it up.

[@briancoonrod7224]

Nicely 👍done I also like watching small engine repair taryl fixes all and am guilty of watching Al Bladez lawn repair especially when it’s raining and I can’t mow my own yard … lol 😂 !!!

[@officialmetalwill]

Such an amazing and underrated amp!

[@RussBMCSGT]

I really dig this channel because while I personally am 100% guitar focused in my life right now (I also have a Harley, like to go to Bears games during football season, collect movies, music & music memorabilia as well etc.) it’s pretty cool to see a channel that goes over everyday items like this & isn’t politics or social commentary etc. be well & I hope some of the previous personal issues you’d mentioned have been resolved!

[@fintanoclery2698]

The pikachu pajamas are a nice touch.

[@gandichild]

In your slippers too love it dude excellent it's sometimes amazing what people give up on nice job

[@gregfinley5829]

They come in handy in the winter with getting the snow off your car.

[@bretthibbs6083]

I had the same blower and they are are always hard to pull start finally after a few years it have gave up and I had to buy a new one but I bought a homelite one and that one was awesome.

[@RedEyedPatriot]

Most of the time it's that Priming hose or the carb needs cleaned. Sometimes the drawstring gets bound up cause the return spring gets weak. Love the Jammys Bro 😂😎

[@TheGuitologist]

Who needs to get dressed? F--- it.

[@RedEyedPatriot]

@@TheGuitologist no doubt man. I wear alot of shorts and workboots. Lookin Hillbilly Fabulous 😂😎 Most of my clothes came from RagBags from the Friends of Paint Lick growing up.. A little donation place local to me. All the preppy kids like to make fun of me but none could whip me or out work me.

[@TheGuitologist]

@@RedEyedPatriot Appearances can belie reality. I'm ok being underestimated because of my manner of dress.

[@RedEyedPatriot]

@@TheGuitologist 😎🎸🤘

[@danielsaturnino5715]

That thing blows. Literally :) nice hat cam!

[@drewjohnson4794]

I got one of those off the curb also last fall. Literally the same exact one. Mine starts up but won't idle. It's crazy how much you and I seem alike. I bet your wife was like oh, more junk huh, that's just what you need.

[@paul2602]

Another success story.👏👏👍

[@dalesmyth7398]

I have a Stihl leaf blower, and use it to blow out loose hay out of the round baler, and square baler after baling season to clean them up. I also have an electric Homelite I think it is, that thing blows as hard as the Stihl, and no telling how old that thing is, it's a dandy, but have to drag a cord around. I used WeedEater brand weedeaters for years, the Feather-Weight models, but bought them used at pawn shops, or yard sales, and the thing that wears out on them, is the head. I just got to changing out the whole shaft, fixed for another year. I finally went thru about 8 of them, give them to the junk man, he thinks he can fix them, little does he know, all the motors gave out, I used them hard. I never use ethanol base gas, we got 100% gas down the road, use that in my Stihl saws, the blower and my Stihl weedeater.

[@musclecarmitch908]

My brother in law gave me one of those weed eater leaf blowers just like that! A mouse had built a nest in it and chewed some of the blades off the impeller, I cleaned it out and it worked, just didn't blow as hard as it used too. I gave it back to him after I bought a new one and he still uses it!

[@TheGuitologist]

Put some epoxy on the impeller blades?

[@musclecarmitch908]

@@TheGuitologist I should! Great idea! Thanks!👍

[@frigglebiscuit7484]

i second the jb welded fan blades.

[@jcwear89]

I agree with you wife on the hating leaf blowers too, but leaf suckers, they are way better, gathers all the debris into a bag which you can put in the compost 👍 Cool repair video of non guitar related stuff , quite like that you are repairing and doing your best not to see stuff go to landfill 🙂

[@stu-j]

New lines and a clean would have fixes it Brad.. I do this all the time in the spring when people can't start them because of left in fuel or brittle fuel lines ( ethanol kills the lines) and I sell them for summer beer money. If you need any tips on the small engines drop me a message anytime I'm happy to help. You guys in the US can get what's called race fuel in cans and its perfect for small engines as its ethanol free.

[@TheGuitologist]

This was an early spring pick. I think I misspoke and said fall.

[@phillipbainbridge9107]

Yes, it's engineered fuel and has no ethanol or olefins. Up to 10% blended ethanol fuel is fine to run in small engines during the season as long as they're stored with engineered fuel.

[@kenzingzong6704]

Man it's that time of year again. Just got out my lawnmower and the engine felt stuck. Took the plug out and sprayed a bunch of carb cleaner. I don't know shit about engines, electronics are my thing. Got it running but it still wants to give me bullshit. The fun of lawns :D

[@timothyb1559]

Cool. All that's missing is, "Also sprach Zarathustra" playing in the background. Helmet-cam is pretty sweet. Are you able to monitor what's being filmed?

[@TheGuitologist]

Can’t see a thing when its on my head, but i can take the cap off and just point the hat around when i want to monitor.

[@Araye]

Gotta catch'em all!!!

[@heywoodjablohmei5324]

Flawless Victory.

[@54fighting5]

Good save. Action seems a little high but it's got good tone! But does it djent? Seriously I use ethanol free in my small engines and it really seems to make a difference. It's stupid expensive (but not as bad as diesel yet) but I don't need 20 gallons at a time. Also there's stuff called Mechanic In A Bottle (get at Wally World or Home D for 6 or 7 bucks) that works wonders on gunky small engines to clean them out. Just add in gas and run engine. A little goes a long way.

[@DellFargus]

You can fix almost any junked 2-stroke with a good carb clean or replacement... and punching a giant hole in the spark arrestor screen over the exhaust that always clogs solid.

[@charleschucktaivalkoski4007]

Not sure if you get snow but I'm in Iowa and we get a few inches occasionally.lol Anywho the manager of our apartment complex uses a leaf blower to shovel (?) the snow. Genius. Work smart not hard.

[@TheGuitologist]

For light snow, I can see that working if it hasn't been stamped on and packed down.

[@tolerbearALTII]

Brad, I love your videos. I've been a subscriber for years and have learned a lot about guitar vacuum tube amplifiers from you, Uncle Doug, and Mr Carleson. Could you offer a video on about a 12ax7a vs a 12ad7? With a tube swap? 12ax7a, then 12ad7, and then a mixture of both? There's nothing on the 12ad7 vacuum tube on KZbin. Thanks if you do it.

[@Curtislow2]

BRAD, Next time you want lock the crank shaft, take out the spark plug poke about 8 inches of 1/4' rope in the hole. then when you try to get the nut off the crank it will lock up on the rope. Easily pulls out afterwards.

[@TheGuitologist]

That works?

[@frigglebiscuit7484]

@@TheGuitologist yessir. works great. its how alot of people change valves on an engine with the heads on. just stuff rope in the plug hole, rope wads up and stops the piston. pull it back out when you are done.

[@Curtislow2]

@@TheGuitologist yes sir

[@ericzajac5237]

Use the pre-mixed fuel, no alcohol. That shit ruins everything, especially carbs. I also recommend Joe Gibbs Racing fuel treatment for pump gas. That stuff is the cats meow.

[@TheGuitologist]

Thanks for the recommendation.

[@cyranodemylakai9145]

You play a pretty mean lead blower, but it's keep my other gig of I were you. Next thing you know you'll be cuttin' heads with your neighbor in a lead blower solo. Great job. I enjoyed your job. That's my interest.

[@TheGuitologist]

I’ve been working on my sweep blowing.

[@cyranodemylakai9145]

There is definitely a technique to it. Organizing & herding the material efficiently. It's satisfying.

[@RickDrift]

The Leafblowerologist

[@peterburi2727]

Replace all of the rubber and plastic parts. Ethanol just eats that stuff alive. Primer bulb, fuel filter all the hoses.

[@WarrenBey]

Is there anything you can't fix? You ever do any DSP programming? Seems like the tooling is getting better.

[@WilliamLithgowGuitars]

LOL "lawncare" or "gardening" as us Brits call it! I do miss mowing the lawn. I`d be out most of the day like Forrest Gump(and the stupid expression on my face probably)

[@damygeebo]

That thing looks like it can only blow died up grass clippings.

[@sgriffith2941]

Buy a can of Blaster at auto parts store it is a excellent product works great.

[@sgriffith2941]

You can buy blaster at tractor supply best also change fuel line let it soak

[@R3TR0R4V3]

Hell yeah, dude! Gotta love free shit. Wish I could comes across one of those.. I'd fix it up too. 😎

[@TheGuitologist]

Why not, right?

[@richszmal1653]

One mans trash is another mans treasure.

[@darrellkelly7614]

Buddy your shop pants are killer......Pikachu rules

[@Twobarpsi]

Easier than fixing a Mesa 😃

[@TheGuitologist]

Yep.

[@lvonh9388]

Come for the repair stay for the pokemon pant.

[@thedogefather]

Nice pants bro. I also am a kentucky man who you might find fixing shit on his porch in pokemon pants from time to time hahahahaha

[@TheGuitologist]

We Kentucky boys stay dressed in Wal-Mart dress code 24/7.

[@JackNance22]

I miss the sound of people using rakes and brooms, leaf blowers are pure noise pollution.

[@JaniceLalla]

I got a rabbit in my yard and my dog goes nuts!

[@TheGuitologist]

We have babies!

[@comput3rman77]

I have a rabbit that comes into my yard and chases the squirrels.

[@JaniceLalla]

I got a bunch of stuff you can work on!

[@TheGuitologist]

I don’t need another wife, Janice! 😅

[@JaniceLalla]

@@TheGuitologist just kidding!

[@peterburi2727]

Now you need to find an edger.

[@TheGuitologist]

Just waiting for one in the neighborhood to break.😊

[@peterburi2727]

@@TheGuitologist You've been pretty lucky so far so keep those eagle eyes peeled.

[@laudnivek-k9]

Pull it man pull it lmao 😂

[@jstro-hobbytech]

That tiny blue handle looks like it's a 3d printed replacement

[@Deus_Ex_Machina.]

LOL! My first thought is that you should put it back in the trash, because the whole thing was designed to be trash. I'm angry because I borrowed one of these and the blue plastic choke lever broke off while I was carrying the blower. You can buy a replacement for this cheap flimsy $0.05 lever for $15! Did they design it to break so they could make $14.95 pure profit? What was the value of the reputation of their name brand? Stilh would NEVER do something like this. And now the fuel line broke? I see that replacing the whole carburetor is also a hot retail item. All part of our throw away business model. For shame!

[@jimbeaux4988]

Dang they threw that out because of one broken line.

[@TheGuitologist]

And sprung pull cord. Yep.

[@davidmurray9193]

If you ever get a forge you have a blower for that too 😁😁😁😁😁😁😁😁

[@TheGuitologist]

I'm looking into it. I gotta smelt all the old tubes into ingots.

[@davidmurray9193]

@@TheGuitologist it won't stop their some rail spikes and you can make some knives, and other wonderful stuff, (hard to get the spikes in the UK) I gotta fix my blower as it keeps cutting out lol, I have a bucket of brass I need to smelt as I'm hoping to make a trench knife with leaf spring and built in knuckle duster and then fix in a glass cabinet for display purposes only,. If you get to smelting I'd be interested to see how it goes well cool,. Look forward to your content as it's so varied

[@CalebePriester]

Pokemon pants? lol Brad! You are awesome! Women don't know shit, actually they do know one thing which is how to spend their man's hard-earned money.

[@cookingGuitarist]

Different, we like different don't we?

[@TheGuitologist]

Yeah, I've been moody lately.

[@Superjet113]

Ok Brad, dont you have a work bench in your garage :)

[@TheGuitologist]

Nope.

[@sadowitz8390]

Trash Found Bottle of Milk - Will it give Brad the runs?

[@godddamnit5868]

Oh no one of those green piles of trash... They just don't last

[@TheGuitologist]

Seems like most of the negative reviews I've seen were due to the issues we addressed here - rotting fuel lines and sticky pull start.

[@blkjckgtr3075]

Great find Brad,if the women dont find you handsome at least they will find you handy,taken from Red Green,Cheers!

[@srtamplification]

The last video sucked and now this one blows.

[@thomasputnam4491]

You don't even need to take that off all it needs is a new gas line kit and a prime button installed..and it don't need a carborator.iv done lots of them your wasting your time and money because you don't know what your doing..your going to break the rope jerking on it then your in for a real job fixing that..

[@JR15A2]

Ha, those Walmart-bought homeowner-grade units are so cheap and shitty. They wouldn't last a week with a commercial lawn maintenance crew. Redmax or Stihl for the win, they will last the average homeowner a lifetime. They're obviously much more robust, but the difference in performance is night and day as well. The future is electric with this type of stuff, though. Stihl is doing pretty well in that market at the moment. I may have heard the sound of millions of Weed Eater brand blowers and trimmers crying out to you for help from dumpsters across the nation while watching this video. It's scary that so many people aren't smart enough to fix something so simple. The ubiquitous "Oh brother...throw it in the gutter, and go buy another" mentality.

[@comput3rman77]

No love for Husqvarna?

[@JR15A2]

@@comput3rman77 No way man! Husqvarna and Jonsered are definitely good to go.

[@TheGuitologist]

I know. I could probably take this entire thing apart down to the screw and reassemble in a afternoon. Not much to them.

[@JR15A2]

@@TheGuitologist Yep, when I was a lot younger and a lot dumber, I was a part-time small engine mechanic at a True Value hardware store while going to school here in Georgia. As long as some dummy didn't run straight gas in it, I could usually salvage them with a new spark plug and a refurb kit with diaphragms/gaskets/needle valve for whichever Walbro carb they were running. It's usually the ethanol in the gas that kills them. Fuel filters, fuel lines, and tiny constant velocity carbs don't like that stuff. Good video; it brings back memories of simpler, more care free times for me.

[@ianmism]

Capital.

[@davidmolina3520]

🐇

[@filonome]

hahaha, weed eater (leaf blower*).

[@nickdevriese]

That’s the brand.

[@phillipbainbridge9107]

@@nickdevriese Thank you CPT Obvious

[@TheGuitologist]

Where i grew up we always called a trimmer a “weed eater”.

[@jimirox1928]

That does it. Brad finally jumped the shark..... This once great YT channel is now officially dead to tube amp builders/amp repair, etc. Good luck with your weed wacker..........

[@TheGuitologist]

Goodbye.

[@mitkothemacedonian]

Wow, you'll go to bed with those same pajamas later? And walk over the carpets in those same slippers? Would it be too much of an effort to don some everyday clothing after you take the morning leak? Is it too much of a hassle to keep a pair of flipflops or sandals near the door to put them on in case you go outside? Your wife must be very tolerant. Or has maybe grown indifferent.

[@TheGuitologist]

I don’t wear shoes in my house

[@65dougk]

Worst...sounding...amp...EVER!!

[@TheGuitologist]

Got a massive hum. Probably needs caps.

[@elkaszenith7875]

For the sake of joe biden can you stick to repairing amp videos. If your trying to appeal to more diverse viewers or likes it is not working. although some may like seeing you finger this crap in your Pokémon sleep wear it’s a waste of time and I’d be willing to bet it is not dramatically affecting your KZbin numbers. You might as well be pulling a muddy stereo receiver from the river and restoring it to new. Jesus Christ are you a plant?

[@TheGuitologist]

You think i wore those pants on purpose?😅

[@54fighting5]

@Elkas Zenith So...can we count on you for a donation to Brad's channel?

[@54fighting5]

Hey Brad have you thought about doing a video on rescuing an abandoned puppy? Those seem to get a lot of views!😁😁

[@anthonyg1968]

What gas line did you place the filter on? That's the issue I'm having