Traxxas Rustler 4X4 VXL | Differential Service

Рет қаралды 6,583

Red BANDIT Racing

Күн бұрын

Пікірлер: 33

@LilBITRC_Shady Жыл бұрын

Rustlers are easy to work on 👍🏻

@jesustierrafria2515 13 күн бұрын

Thanks just got into the hobby trying to learn as much as possible 👍🏼

@ferrisbueller1347 Жыл бұрын

Within the last 2 weeks I just replaced the diffs, re-lubed, and put all new driveline bearings in our maxx and hoss. Our rustler is on the new side so I havent done it yet. You learn alot more about your cars when you do something like this yourself. Ive also heard you say you like the rustler the most and I agree. They are all great cars but the rustler on 3s, sledgehammers, and the extreme kit it is so much fun and lively.

@redbanditracing Жыл бұрын

I’ve always said the Rustler is a beast, love it. Thank you for the comments

@redbanditracing Жыл бұрын

I hope this video helped those who needed it, it’s not a hard service to perform. I didn’t show on camera, but always lube the seals before installing so they don’t tear.

@Cfraj211 21 күн бұрын

thank you so much my rear diff was not working and this video solved the issue

@thebandit188 Жыл бұрын

The Rustler has a very simple differential, much like the Sledge. The Maxx isn’t that bad also.

@jameschho Күн бұрын

I take off all the seals and drop the housing and gears into the ultrasonic for 10 min to get all residual fluid and debris out then rebuild with fully cleaned parts.

@redbanditracing Күн бұрын

We have one from CowRC

@woodlakerc7047 Жыл бұрын

Great video dude, Just 1 small comment, @09:00 you say you wanna clean it all so that there is nog grease anymore. i think i would be better to just put a drop of 10.000 in there so the rubber seal has some lube and it wont burn on the metal while rotating and getting al crumbly. Just a thought, for the rest i completely love this vid. Keep up the good work

@redbanditracing Жыл бұрын

Good catch, I missed that. I always lube the rubber seals so they don’t tear. Thank you for watching

@woodlakerc7047 Жыл бұрын

nvm, at 20:40 you told us to grease it a bit hehe

@redbanditracing Жыл бұрын

No worries, I’m glad you know the correct way to rebuild a diff. Most people don’t take the time to learn this stuff.

@DevonHartigan 6 ай бұрын

First time builder here. I bought the 4x4 Stampede kit. It seems both my differentials has quite a high resistance when turning by hand. I disassembled and reassembled them both, tried not to overtighten the screws, but the resistance when turning still feels too high. The gear also feels somewhat grindy. How much resistance is normal? Edit: Might be due to the 30k oil. I still had to losen the screws more than i'd like or the resistance would feel to high and grindy'ish.

@redbanditracing 6 ай бұрын

Which kit did you buy, a differential rebuild kit?

@DevonHartigan 6 ай бұрын

@@redbanditracing A complete car assembly kit: 67014-4

@Ragnarok881 Жыл бұрын

hi great video was wondering what gear ratio you use with those sledgehammers ???

@redbanditracing Жыл бұрын

11/54, stick ratio. Works great, could go down to a 9/54 if you want.

@Ragnarok881 Жыл бұрын

cool thnx was planning to get some myself just wasent sure if stock gear would like the bigger wheels :) @@redbanditracing

@Disturb3dMnd 4 ай бұрын

If you want to do a deep cleaning what would you recommend using to clean the oil off to use a different weight?

@redbanditracing 4 ай бұрын

WD-40 does a great job breaking down the oil and grease. Then rinse off and air blow it dry, I use an air compressor. COWRC makes a great ultrasonic cleaner.

@Disturb3dMnd 4 ай бұрын

@@redbanditracing thank you! I appreciate you responding.

@BigDaddyAlien 4 ай бұрын

Not Qtip as it will leave little strands of cotton everywhere I can't believe he used them.