Traxxas T-Maxx 2.5 Part 13 Engine Installation

[@vidalguerra8737]

Man loving the tubing tip I never thought of that! Camera looks great as always and audio has great quality just like your videos. Can’t wait to hear it run!

[@RcHelpDotCom]

Thank you Vidal for the update. We should hear it run soon, I hope lol.

[@NekroSilver]

ya said you were gonna play with the RC after you finished! where's that video?!?? Great vid btw. it was hard to see the lighting on the flywheel and the gear. but I understood what you were saying. thanks for making this vid! #1 on youtube in my opinion!

[@flintsmiley9595]

What if you dont have them 12 pins in the spur gear ?? Mine only has 6 ??

[@hendriegrimberg5016]

Big thanks for the serie it helps alot

[@mrsideways4574]

The camera looks great can’t wait to see the tmaxx running

[@RcHelpDotCom]

Seriously? This one was horrible lol. I think I would rather see the combing from the interlaced video lol. But definitely thanks for the feedback! The truck should be running soon, I hope lol.

[@trevorcheong4959]

Great work love it

[@RcHelpDotCom]

Thank you Trevor! www.Rc-Help.com

[@trentonmiller8255]

I been here threw the full build of this truck I love it

[@RcHelpDotCom]

And I thank you greatly for that! I know I'm having a lot of fun with this thing, but my cameras are having me banging my head against the wall lol.

[@trentonmiller8255]

RcHelpDotCom lol I bet but I thank you so much for your rc videos that u do I appreciate them and how many rc do u have

[@RcHelpDotCom]

Do I really have to put a number on how many RC's I have? Because I'm not exactly sure lmao. 40?... 50?.... Something like that lmao.

[@kylegeorge84]

really enjoy your videos.the camera and sound are great aswell.Do you have a video on how to tune these engines?

[@RcHelpDotCom]

Unfortunately I do not right now. That was the next step in this truck, and life got in the way and I was never able to complete the series. It is still in the plans, I just don't know when I will be able to get to it.

[@RcHelpDotCom]

so now we wait and see if the person that left the thumbs down will speak up and let me know what they didn't like about it....

[@rsracing-mb1tr]

I doubt it lol

[@RcHelpDotCom]

Yea, me too, but I thought it was funny lol.

[@flintsmiley9595]

Coward wont respond

[@flintsmiley9595]

Gooder enuf for me :) lol well done

[@genialambert5052]

So i got a tmaxx classic 2.5 stock should i do a light weight 40 mm flywheel with two pins for clutch or should i try to find a tripple clutch flywheel and does it really make a diff thanks

[@RcHelpDotCom]

I would stick with the stock flywheel if not a solid steel flywheel. The heavier the flywheel, the more rotating mass it has and the smoother and easier it idles. Two shoes are fine for this truck. If you turn them around backwards, it will grab like there is no tomorrow, but adjust your slipper otherwise you will start twisting the driveshafts as I have shown in previous videos. www.Rc-Help.com

[@rsracing-mb1tr]

So attempted to drill through the shaft one one of the trans shafts on the 4910 an man I wish they made the pins as hard as the shaft lol I'm trying to put the black revo shafts into the gray 2.5 trans lol it's a challenge so far

[@RcHelpDotCom]

Yea, these shafts are more than likely heat treated. Definitely hard to drill with a small bit.

[@rsracing-mb1tr]

@@RcHelpDotCom I'm sure they are it's a mission lol

[@mrcrowley12002]

i just bought the Tmaxx 2.5 should be here tomorrow.Can i break the engine in in 30 and 40 degree weather??

[@RcHelpDotCom]

As long as you get some heat in the engine, you should be fine. But since this is Traxxas, follow what they say on the break-in procedure in the manual. www.Rc-Help.com

[@tinfore]

Which SJCam do you have? Video looks decent.

[@RcHelpDotCom]

dis'n... www.banggood.com/custlink/m3G3c8BCLa

[@rsracing-mb1tr]

Hey man great vid as all ways an how thick is the 2.5 Chassis

[@RcHelpDotCom]

The chassis is 3mm thick.

[@rsracing-mb1tr]

@@RcHelpDotCom so is that considered a big block chassis

[@RcHelpDotCom]

Not real sure on that one. I wish I had my .15 with me still to compare it to.

[@rsracing-mb1tr]

@@RcHelpDotCom the 2.5 Chassis is 1/8 in thick an the 4910 is half that for sure it's thin cus I have the 4910 chassis on 3906 drive line an the 4910 trans an the gray one is the one in trying to put the shafts in an make it forward only an locked in 2nd an hey got a ? Is it the same theory in the trans an the pinion big small I wanna use let's say a 34 pinion an a 19 an maybe a 25 for a all metal trans I'm trying not to spend the money on it if I might be able to make it work but I might Grande my trans also

[@RcHelpDotCom]

I measured it out at 3.02mm. I figured the '.02' was the thickness of the anodizing layer, or oxide layer if you will. Just shy of 1/8" which is 3.175mm. As for your trans question, I'm not quite sure what you are asking. The same theory does play in regards to pinion/spur, larger pinion smaller spur equals higher top speed, but slower takeoff. Smaller pinion larger spur equals lower top speed, but much faster acceleration. www.Rc-Help.com

[@flintsmiley9595]

Thank you :)

[@sire162]

What's up Toooonny! Lol

[@RcHelpDotCom]

whatup!

[@sire162]

@@RcHelpDotCom You! Lol. Catch any snakes lately? Lmao. It's finally warming up in Michigan, lol. Been running my nitro circus basher 1/8 scale and my sabretooth basher. Learned one thing. Don't buy batteries with the burst speed. Takes off like a bat outta, but then they tend to slow waaaay down or just stop.

[@RcHelpDotCom]

No snakes. Lots of Mayfly's thought. They are like a mosquito on crack, and they bite lol.

[@sire162]

@@RcHelpDotCom You know t word! Lol. NOOoooope!! Lmao! Not doing that! Lol! I want one of those traxxas's sweet! With that 2 shock per wheel. Gotta be electric, they'd call the popo with the noise from that nitro motor, lol

[@RcHelpDotCom]

Just wait until I get the Savage up and running!! It's going to make this little T-Maxx look like a little B***H!!! lmao.