TRAXXAS TRX-4 Sport - FIRST RUN - Proline Super Swampers and Proline Raptor F-150

[@richduperbash2966]

Amazing video my friend 👀!!!! Body and tires look Killer 👌. Great close-ups and angle shots. Loved the root bounces. This TRX looks super scale. 🍻🤘🤘😎💪👊👊

[@RoosterRC]

Rich you are watching crawler/scaler vids? I am shocked :D :D :D No 100ft jumps there ;) Thanks alot man for keeping giving feedback - this is the kind of support that pushes me the most do do that videos!

[@wesleemiller]

Great video and a cool rig.

[@RoosterRC]

Thank you very much!

[@wesleemiller]

@@RoosterRC you're welcome.

[@MarkBryanRC]

I Love the job you did with the Raptor body, Markus! That is one cool truck - great ascent and a beautiful scenic shot at the end - thumbs up dude! :))

[@RoosterRC]

Thank you so much for the feedback! Appriciate it!!

[@MarkBryanRC]

@@RoosterRC My pleasure mate!

[@rccrawlerextreme]

Awesome crawler and crawling skin bro! Video is very well taken!

[@RoosterRC]

Thanks man! Appreciate it!

[@demomicrocrawlerclub]

Nice vid. +1 sub ;) Do you prefer these tires over canyon trails?

[@RoosterRC]

Every day of the week!!! Thank you!

[@demomicrocrawlerclub]

@@RoosterRC thanks. Just bought them :) well the proline rims with dual stage is also a different world vs a simple metal beadlock.... My foams are in place finally. Like the compound so far. Will test Saturday. Thanks again

[@gigilandrc]

Really Nice truck! First video I see of a trx4 sport with a proline raptor body! Was the fitting and adjustement to fit the chassis hard to do? I would love to go with the raptor body! It’s hard to see on the video if the bottom of the body fit in the rock sliders....?

[@RoosterRC]

gigivr6123 hi thank you for your question! no it was not hard. the body fits the rock sliders perfectly! the only real work is, because the body is shorter than the stock one, you have to trim the chassis rails. other than that its a good tight fit! 👍🏼😁

[@gigilandrc]

@@RoosterRC thanks for your response, trimming my chassis rails is a no for me :) Thanks again! I'll put the money somewhere else... hehehe

[@roadrunner5257]

Diameter from the tires please.Awesome video my friend!

[@RoosterRC]

thank you! i dont have them anymore. check proline hp! 🙂

[@LvDirtJunky]

Bad ass truck , my trx comes tomorrow . I can’t wait ! What song is that in the beginning of the video ?

[@RoosterRC]

Trank u! I honestly cant remember 😅

[@LvDirtJunky]

@@RoosterRC that sucks , I’ve been hearing it alot lately and can’t find it anywhere 🤣

[@RoosterRC]

it is from the free yt library, that is for sure i believe

[@felixotero1]

Nice paint job awsome SLO MO action video cool view at the end

[@RoosterRC]

Thanks mate for sharing!!

[@TheTruthHz]

Hi, I've just got a trx4 builders kit with the full electronics and wheel fenders. Will this fit over the stock fenders too? I see you've removed yours in this video.

[@RoosterRC]

I did not have fenders the time I made that video (TRX Sport RTR had none). Now I have em and they fit great!

[@TheTruthHz]

@@RoosterRC thanks for the reply. Which fenders did you get, can you remember? I think I have the wide set on mine which is making it a pain to find a body that fits. I don't really want to start cutting up my new kit and the narrow set are hard to track down in the UK as the only narrow ones available seem to be the ones for the new clipless Bronco body.

[@RoosterRC]

@@TheTruthHz Sorry I can't remember.

[@joerutkowsky3261]

I love that truck. Your videos are awesome. Liked and subed.

[@RoosterRC]

Yes its a very capable truck. Thank you and welcome to my channel! 😊🎈

[@robbrcnstuff4220]

Great looking rig, I like the proline super swampers with the 2 stage foams, they have a good scale look and lots of traction. I just subscribed to your channel.

[@RoosterRC]

Absolutely!! Thank you and welcome to my channel!

[@rdpancake]

how you know it had 2 stage foams?

[@robbrcnstuff4220]

@@rdpancake that's what I have in mine.

[@wesleemiller]

Hey I just subscribed.

[@RoosterRC]

Thank you and welcome to my channel :)

[@jezedwards190]

Brilliant... Thanks 👍

[@RoosterRC]

Thank you very much! 😀

[@sprather84]

Awesome vid my RC friend 👍 SUBBED

[@RoosterRC]

NICE! Welcome!

[@timnoe50]

Would you see any potential clearance issues running this body with the Traxxas Narrow fender wells installed?

[@RoosterRC]

Tim Noe No, had them installed allready and had no issues 👍🏼

[@timnoe50]

Rooster RC Thank you for the fast reply. I really appreciate that!

[@RoosterRC]

Tim Noe youre welcome 🙂

[@Tyler-es]

Awesome slo-mo😆👍, what color/paint did you use for the fender flares?

[@RoosterRC]

Tyler Estes hi and thank you! I used just black spray on the outside.

[@Tyler-es]

@@RoosterRC cool turned out great

[@dragonmodel9262]

Hi do you know if this is the same exact width as the traxxas trx4 sport body? And to fit this you had to make the wheels base about an inch shorter?

[@RoosterRC]

As I already sold the stock sport body I can not tell you. For the Proline Body you have to do no wheelbase adjustments. It fits right on the stock sport wheelbase. However I trimmed the frame rails about a 10mm so that the rear bumper would snug right under the body. Also some cutting at the front bumber let me fit it more inside the body.

[@dragonmodel9262]

@@RoosterRC Hi,I appreciate your reply thank you because this body to me is the best one I seen so far that can fit on the trx4.I have the sport body and a traxxas bronco but I still like the look of this truck better. Thank you I will be ordering this next its good to know you dont really have to adjust the wheelbase thank you for the other information about the rear bumper.thanks you have a good setup.

[@RoosterRC]

@@dragonmodel9262 You are very welcome mate! Enjoy the body it is awesome AND as an additional good thing - the width of the body fits perfeclty into the stock rock sliders. You can't go wrong with the Proline body!

[@dragonmodel9262]

@@RoosterRC Hi,thank you because I was wondering about the width too it looked ok on the video but I didnt want it too narrow anyway that is good information thank you. im going to order this in a few days thanks again.

[@Cursed_jimny_4x4uk]

that is an awesome truck dude. love that type of crawling too 😉

[@RoosterRC]

I am also very pleased with how it turned out. Was a little afraid first that I can't do it properly. Thanks for your comment!

[@Cursed_jimny_4x4uk]

@@RoosterRC no problem😉

[@altaga66]

Very good video & montaje mate 👍🤙👍

[@RoosterRC]

Thank you very much!

[@skd0526]

good looking truck,nice!

[@RoosterRC]

Thank you! :)

[@nelsonplourdegirard3443]

Do the foam are the g8 ?

[@RoosterRC]

Could you be more precice please?

[@jrcc5244]

Nice video!!

[@RoosterRC]

Hey there, thanks and welcome to my channel :)

[@stonewhiteMr]

I think raptor body is the best item for trail RC...

[@RoosterRC]

Why do you think?

[@stonewhiteMr]

Rooster RC Cause it's cool.

[@RoosterRC]

@@stonewhiteMr definetly ;)

[@rcnoypi8758]

Just like the real raptor lucky you got a beast:) thumbs up!

[@RoosterRC]

Haha, thank you!

[@SnarkyRC]

Nice video. Those tires look pretty huge though

[@RoosterRC]

They are!

[@a_puppy_s_happy_life]

Wow, cool video. Support! I'm also practicing the image. A lot of support, please.