Since I broke one of my stock arms I decided to replace all the arms with a set of Red HD Arms.
Пікірлер: 29
@ScottMyers51892 жыл бұрын
Quick tip on the front upper hinge pins. Take the drill bit put it up to the head of the bolt and put a piece of tape on the drill bit so that way you know how far in to drill. BTW great vid!!
@RCKnockout3 жыл бұрын
Looks like a real nice upgrade. I really like that they’re red as well!
@noeysfastrc32913 жыл бұрын
Very nice indeed brother it came out awesome. I will be getting the blue HD arms for my X-MAXX. Thanks for the informative tips will keep those in mind. 👍
@Doug_Morgan6 ай бұрын
Instead of trying to drill out the broken bit in the rod end you could also use a Dremel with a thin cutoff wheel and cut a small slot in it so you can screw it out with a flathead jewelers screwdriver.
@fabriziodaurizio10096 ай бұрын
Hey buddy, a little hint to help not drill to far. If you use a tube or old pen cut to size, slide it over the drill bit, leaving only as much drill poking out the end.
@oscarmike1313 жыл бұрын
Thanks for the video install, i just got my whole set blue in the mail and im about to install all of them here soon
@philwebb6063 жыл бұрын
The head doesn't need to sit inside the arm, you just weakened the arm drilling it
@JasonPerrinRCVlogs3 жыл бұрын
Actually it does. But thanks for the comment.
@philwebb6063 жыл бұрын
@@JasonPerrinRCVlogs I've them fitted front and rear and about 1/2 inch clearance from bolt head to rim
@Jstall75433 жыл бұрын
I like the Red Arms!
@MrTorque32 жыл бұрын
Alot od RC people made same mistake... You dont need a RPM hinge pins just put a little washer under the l screw which hold original pins
@REDWOLF_RC_ARMORY3 жыл бұрын
Love the arms reminds me of the maxx wide kit wish they had the different colors stuff for arrmas because my Keaton 8s needs some color 😎
@RapidRC7313 жыл бұрын
What do you think about the traxxas HD arms because I’m planning to get some on mine x maxx
@basher-853 жыл бұрын
I like the way it looks! I just installed the orange HD arms on my Xmaxx yesterday. I feel like they will be alot stronger than the standard ones.
@GreatLakesRC3 жыл бұрын
Looks cool man 👍 You really have your Xmaxx tricked out! 🤩
@CharlieFultonSC3 жыл бұрын
Nice. I was just “lucky” enough to finally break an a-arm also. Nice Velcro mod for the body.
@paulcherry15203 жыл бұрын
Let me know how they hold up! They are one my wish list for upgrades ! How much did it cost u ?
@EZRider7233 жыл бұрын
Did you put velcro on the inside of the body as well? If so, does it help prevent the body from flying off during bad landings?
@max2max7063 жыл бұрын
Hi,so you have to use the drill very carefully. Unfortunately I have little space and I am not so precise in manual work, you count as Groot baby when he has to press the right button. 😅 Good job. p.s. (my dream is to have a dedicated room with the right equipment). 🤤
@michaelbriffa56573 жыл бұрын
What size drill bit numbr did you use to make the hole plss
@lazie823 жыл бұрын
What size drill bit?
@abdulrahmanalzuabi1713 жыл бұрын
guys any one can help i just installed max6 on my xmaxx and unable to set throttle when i pull the trigger for throttle setting and press set button nothing happen.. what can be the problem?
@lunatik43 жыл бұрын
Why did they make an arm that doesn’t let the bolt fit in? Thanks for sharing your knowledge!
@JasonPerrinRCVlogs3 жыл бұрын
The truck stock uses hinge pins which are held in place with a screw. A lot of us change that for a full nut and bolt for extra strength.
@lunatik43 жыл бұрын
@@JasonPerrinRCVlogs thanks jason, makes sense!
@miamiplayer3 жыл бұрын
I have a question where can you buy the body like that already painted ?
@JasonPerrinRCVlogs3 жыл бұрын
www.pitdawghydro.com/
@timjohnson94063 жыл бұрын
You lost me after 10 minutes of explaining how to countersink a screw.