Tri-Five Chevy Double Spindle Overview

[@olfatskootch]

Man I was glad to see this done. My buddy had a Chevy ii with this done and I'mma try to do it on my raggedy ol 55

[@LovettSpeedShop]

Absolutely it can definitely be done and doesn’t loose the ride! Good luck thanks for the support.

[@LovettSpeedShop]

Come check out live tonight 12.11 @ 7 pm est . We have a surprise!!!

[@piratescovegarage8269]

This is pretty cool, never heard of it but any information on gasser stuff is good, Thank ya!

[@LovettSpeedShop]

Yea man! They are cool. Get the gasser look without loosing the ride.

[@nextlinkzcustoms6329]

Passed on knowledge passing on nowadays is always a good lesson learned. Keep up the good work..

[@LovettSpeedShop]

Absolutely!! I couldn’t agree more. I have nothing to hide and if it helps the next person down the road. Then it has been a great day!! Thanks for your support.

[@richardpotter1401]

Man that is so cool man . thank you...

[@RandysFiftySevenChevy]

mine were done in a jig 10 years ago. now its straight axle

[@DDSpeedShop]

those are awesome guys! the ones iv seen always looked sketchy haha. those ones look plenty strong all gusseted up.

[@LovettSpeedShop]

Haha i thought the same thing when we decided to build a set. Dad said they didn't use anything back then but weld them up. So with this set we added the gussets and made them extremely strong. Thinking about using them under the 55 but haven't decided yet on witch direction im going with it. I have the 5.3LS im thinking about using when i get there on it.

[@FUELFIREGARAGE]

It's always cool to see way to save money on build instead of just ordering out of a catalog 👍👍👍

[@LovettSpeedShop]

For sure I try to save money on all my builds. If I can make it I do vs ordering parts.

[@RadRandyandLilCindyRogers]

Thanks for that information! I saw a 55 Gasser in Lebanon, Tenn that had the double spindle set up!

[@LovettSpeedShop]

@Rad Randy and Lil Cindy Rogers anytime Your welcome. The 55 is looking great!

[@invisabledad]

Ran those on my 55 back in the early 70s. Thanks!

[@LovettSpeedShop]

@Tony Greeson Yes sir they was very cool back in the day for sure!

[@IronheadGarage]

Really cool what they used to do back in the old days lot of people now would be scared to do something like that

[@LovettSpeedShop]

@Ironhead Garage Definitely cool!! I’m thinking about using them on the 55 once I get that far on it!!

[@ronaldolweiler7745]

I found a better way . Cut the lower ball joint off andcweld the end of a G body gm on the end of the tri five A arm . Then put G body lift spindles on , you can get 3 or 4 inch spindles at lift a brand . Gives you stock spring , G body disc brakes and proper alignment and spacing . Gives 4 inches .

[@drdjh2003]

Funny, I was just questioning if you could put disc conversions on these raises spindles. A guy I know has one of these cars it’s been sitting 20 years and we were talking about putting this brakes on it with his raised spindles.

[@LovettSpeedShop]

@ david H Yes you can definitely do the disk conversion with these. It works same way. Your steering stays in same place as factory and caliber bracket will bolt right up.

[@darrellslinger7931]

I'm looking for some raised spindles for my 55 Chevy Bel Air, can you help me out???

[@ronaldolweiler7745]

Would you sell me a set of those raised spindles ? Haven't seen your videos for a while, you guys ok ?

[@LovettSpeedShop]

I don’t have a set on hand. Yes all good just been on little break. I’ll be fired back up on it this fall.

[@ronaldolweiler7745]

If you make another set contact me please

[@LovettSpeedShop]

@@ronaldolweiler7745 yes sir I will. If you have two sets I can make you a set

[@ronaldolweiler7745]

@@LovettSpeedShop i do have 2 sets , il contact your web site this weekend , im a truck driver , I live in pa but im in Maine now lol

[@Jimmyjamesgarage]

Have you been running them since you built them?

[@pappabob29]

Just one question: So the spindles are forgings so they can be welded as usual ???

[@LovettSpeedShop]

Yes sir they can definitely be welded on. If you make a set I would recommend the guesses like I put in mine for additional safety.

[@pappabob29]

@@LovettSpeedShop Thanks for the reply. I won't be building a gasser type tri-5 but found this very interesting. Your parts look VERY well done !!!

[@LovettSpeedShop]

@Pappa Bob thank you sir.

[@clarkgiddens5418]

Remember those well

[@LovettSpeedShop]

They are definitely pretty cool.

[@ronaldolweiler7745]

How can I contact you to discuss sending spindles and money?

[@rexblocker9220]

could I talk you into selling me a set of these spindles

[@lionelmandrakegrp.cpt.6396]

Thoroughly BORED blonde in the background is a nice touch, Senor. Ha ha ha! Maybe you could pay her to wield the camera, EH? Great video!