Tricky mechanism that will be needed in every workshop!

[@hand_craft]

Friends, how do you like the design and practicality of this tool?

[@JEYD220699]

This is brilliant! 2 in 1 clamp! 😯

[@benorth0311]

Absolutely true headliner! If and (when) I get a welder and a metal lathe, this is the first project. Just found your channel last month. Love it!

[@benorth0311]

@@JEYD220699 what I call twofer

[@steph..4861-r8x]

🟦⬜🟥😉👍🏻

[@fabricemenoud3296]

👏👍 je suis épater, bravo pour le travail 👏👨‍🦽💨

[@MrPallingo]

Vanya, I saw your teeter-totter how-to-make video. You are a SUPER DAD !! Your children must love you so much !

[@valdomiro173]

I am a beginner to woodwork, the main test I have with this bundle kzbin.infoUgkxTNB_zFBSnTo_O1PqfVUwgi7ityw0JlKt is that I think that its hard to settle on a choice of the plan and outline to use as there are a large portion of them there. Nonetheless, I like the simple stride to step directions laid out there.

[@markgoddard2560]

Briliant idea.

[@onedegreespot]

Thats a cool idea! Well done and thanks for sharing.

[@shayanzarbati5216]

Excellent bravo 👏

[@fantomas2842]

So well and cleverly done!!!! A masterpiece!!!! Thanks for the idea!

[@frankrichter2556]

a very great idea

[@jy6174]

awesome idea and execution

[@saidkharbouche6381]

Une brillante idée, un super concept et une réalisation impeccable !!! Bravo et un grand merci pour le partage 👏🏾👏🏾👏🏾👏🏾👍🏽👍🏽👍🏽👍🏽🙏🏽🙏🏽🙏🏽🙏🏽

[@AlejandroLapeyre]

Beautiful

[@jackgunter5413]

I like it ,,,, Thanks ,,,, I will make a set

[@kathrynnewton8721]

Love the clamps!

[@ujteabonsai51]

Thank for sharing my friend

[@andybilakshow260]

I have this type made from aluminium. If I remember correctly, EXPENSIVE!!! This is a great design. Simple & straight forward. Thanks

[@blackhorse2947]

Bravo………. Simply brilliant

very nice project thanks for sharing

[@homemadetools]

This is a very interesting clamping system. We shared this video on our homemade tools forum this week 😎

[@lolamann110]

Bombe, ... soooo good.

[@plectrumful45]

Wow .... 😁😁😁😁😁 To good. 👍👍👍👍👍

[@lolcec81]

Комментарий в поддержку канала и ролика, а также труда мастера.

[@achimwestermann]

Very nice. Pressure in both directions by desgin. Thx for sharing.

[@strannostrannovasrr]

Very fancy

[@paddlefaster]

Very cool idea.

[@jean-lucmarquette4503]

Wow !!! tout simplement génial ton système ! 👍🏽👍🏽👍🏽 Bravo pour cette réalisation et merci pour ton partage 😊

[@jen4730]

great idea!

[@rastapete100]

That is really cool.

[@stormman8393]

You are a genius. Brilliant!

[@bearshield7138]

very nice

[@ElliotFriend]

Very clever design! Well done!!

[@artursmihelsons415]

Coolest multi directional clamp design! 👍 Great video and excellent job!

[@court2379]

Weld the eye closed or it will open up over time. Interesting build. Thanks.

[@treba-zv]

👍🏻very very good

[@KORZDAKRA]

Nice tool 👍

[@clevelandexplorer2221]

Brilliant

[@andreeyship3660]

от жэш кайфанул от идеи!!!! ;-) ;-) ;-) шыкарно!!!

[@jimsvideos7201]

Clever!

[@majigaining]

Neat!!

[@lsneiva]

Impressionante!!! 😀👍👏🤝👆

[@pikifrino]

Interesting! Thank you

[@woodstoney]

Great design and very useful!!

[@joshstephens3224]

That's the best idea I've seen in a long time. I will definitely build this for my shop.

[@PreservationEnthusiast]

A waste of time and materials. I wont be building one for my shop

[@ecokestove]

@@PreservationEnthusiast We are all pleased to know you will not be building one. Thank yopu for telling the world.

[@PreservationEnthusiast]

@@ecokestove Were yopu also pleased to hear that Josh Stephens would be building one?

[@fortierma64]

That is a great idea. Excellent design!

[@peterkelly8953]

Very well thought out!!!

[@jaymoon8559]

cool thanks

[@yashikadilani5063]

nice work, keep it up

[@games-yh3yc]

очень оригинальная струбцина , надо взять на заметку

[@MartinvanderRoest]

Very clever and practical. Thank you for sharing!

[@AstraMachtSachen]

Clever Concept.

[@marcello1982]

Really well done in craftsmanship. I'd only change the tightening handles or install a spring mechanism to save force in tightening up. But again: really well done!

[@halilinusi]

Creative~malaysia boy👍👍👍

[@robgail4147]

That is awesome. Thank you

[@kayeubanks5207]

Cool. Love it

[@hassanal-mosawi4235]

Thanks for sharing those tips and the make!

[@selcukbugan3769]

very nice and a dam good idea very very good!!!

[@huelen1964]

Genial !!! me encantó, te felicito y gracias por compartirlo.

[@rafaelperalta1676]

Great work.

[@bibekbose5676]

Ingenious.. Bravo.. I will make one.. tomorrow..

[@44Thump]

Most Excellent!!!!

[@jamesmott5452]

Brilliant just brilliant well done

[@matmuratabatov6603]

Very cool video and amazing!!!!!!!!!!!!!!

[@RobertSmith-me3gs]

Brilliant.

[@WikiSnapper]

Those look really useful!

[@user-uj6sc7ls9y]

I _thought_ it looked like you were making a clamp. A unique and handy tool for _anyone._

[@GARAGE55]

✅🔥👍👍👍

[@bykers81]

Wickedly awesome well done

[@bradleytuckwell4854]

Brilliant idea and design thanks for sharing

[@karlriley1314]

Very nice.

[@Jorriecruiser]

Great very great

[@Etrehumain123]

Alight very smart built

[@chefouichef]

Excellent !

[@samwillard5688]

When this guy says, "Hang on, I've got an idea", I am going to pay attention.

[@PeterNetped]

Top..

[@АлексейКостюченко-ъ5н]

Классный вайм получился

[@ladedk]

Clever! Great idea and execution.

[@etisvloghoustonusa959]

Assalamalikum bai..good to see u. Stay connected

[@pieteri.duplessis]

Neat.

[@jonjonr6]

that's fantastic

[@jimparsons6803]

Interesting setup. There might be a change in the last bit or two: Might want to use wax paper or maybe wax down the two horizontal surfaces, as they might end up being glued to your work pieces.

[@petec6690]

The builder put something down to prevent gluing boards to the jig.

[@hyselwatchandclockrepair1874]

At the 7:40 time he put masking tape on the surface of each clamp board.

[@matekochkoch]

I will build one. Thanks!

[@eCitizen1]

Clever and usefull tool. What do you call it? Can I suggest GLUE DOG?

[@MsRomkee]

AMAZING!!!!!!!!!

[@hand_craft]

)))

[@lucasmartzolff812]

Waw 👏

[@ajwoddesign443]

Nic work 👍👍👍

[@BartekEVH]

Amazing!!

[@Habibulla.M]

Nice build ❤️

[@ВалерийСмирнов-щ7э]

Оригинальные ваймы 👍!!!.

[@laithalhaydar4248]

great idea, question, was it totally your idea?

[@korekapik]

I am sure i'll make this for the next project. Big thanks sir.👍

[@eladyihie2502]

מעולה מדהים עיוצב ותכנון חכם

[@leehaelters6182]

This is a great realization of the idea. My only caveat can also be encountered using the less sophisticated method of conventional bar clamps with separate clamps to squeeze the cauls. When pressure is applied on the cauls to flush up the clamped pieces, any pressure applied on a cantilevered part of the caul, rather than inboard, acts to bend the cauls slightly, lifting the pressure in the middle of the glue-up and allowing the members to slip and slide to an unflush condition, defeating the function.

[@davidbostock6933]

So, angle iron bolted on sides to faces would reduce that ?

[@leehaelters6182]

@@davidbostock6933 yes, it definitely would. But no need to go to that length, when the remedy is merely to shift the pressure applied vertically to a point inboard of the edge of the stock. Goes for all applications, the subject of the video included! In the pictured case, extending the clamping screw less would allow the apparatus to engage the caul a notch or so farther inboard. If that point is even only slighty in from the edge of the stock, goal accomplished!

[@Syncuno]

I wish I knew what that meant. Guess I’ll have to look up some terminology…

[@leehaelters6182]

@@Syncuno, imagine this: a freshly made S'more (do you know the Girl Scout camping confection?). Now, you are trying to spread the filling between the two Graham Crackers by squeezing with a pair of popsicle sticks laid flat on top and bottom. If you just squeeze those sticks by their overhanging ends, they might flex so much that the stuff in the center does not flow but the crackers break in half. Rather than letting that happen, you squeeze with your fingers closer to the middle of the sandwich, the sticks don't deflect as much, and a tasty, more evenly spread treat is achieved. Well, I guess that was just as obscure, sorry. What are the terms I used that were not clear? Cauls? Cantilevered?

[@napadave58]

@@Syncuno That? It means "the thing there."

[@Townie001]

This style of clamp has been available or over 30 years that I know of. I bought 3 sets in early 1990s at Woodcraft.

[@hyselwatchandclockrepair1874]

I bought the hardware kit from WoodCraft in 1992, six sets, my oldest son has them now in his wood shop. I used white oak boards and mounted the hardware on them. I do see a slight advantage in these he made because the notches go all along the length of the board rather then the shorter length of the WoodCraft hardware set.

[@mikesierra8156]

Aussi efficace qu'élégant!

[@epipht]

Great design and could even be expanded upon for larger or even pieces with "strange" angles. Might even be better than the belts and clamps I use periodically

[@jakWiize]

it's great! Nowwwww sell me a set so I don't have to do the metal fabrication :)

[@lisajarvis3820]

😲😎❤️😎😲❤️👏🏾👏🏾👍🏾

[@simplecraft1934]

nice 👍

[@Zeheir]

Beautifel

[@viorsa8200]

Excelente proyecto muy bien desarrollado y mejor ejecutado , una buena herramienta/prensa muy original y peculiar , gracias por compartir tanto ingenió y conocimientos , un saludo cordial y por supuesto un gran like desde Narón (Galicia) 🤓 🔝

[@robertstewart9658]

Note to self. Skip to the end to see if what they are making is even worth doing.