BOSS FS-5L & FS-5U Latching & Momentary Foot Switches

[@gstube1]

Well done, a great help and very informative!

[@adammian9318]

So helpful, tysm

[@srvfan456]

With the RC-1, does the FS-5U allow me to stop and recall a loop rather than kill entirely? For example, stopping the loop, going to a bridge section of a song, tapping the 5U again to recall the loop that was built before I tapped it. Thanks!

[@XD_3200]

Servirá el boss fs-7 para subir y bajar bancos en la boss me-70???

[@darlin451]

Compré por equivocacion el Fs 5L y ese me funciona cada 2 pisadas y no como eo Fs 5U que se activa a la primera pisada. Hay alguna forma de modificarlo

[@josesampaioramos3437]

Great explanation! congratularions! Could you help me? I have a Boss Katana 50. It works with the FS-6. Will it work the same way if I use two FS 5L together with the PCS-31L cable (one changing the Bank and the onter changing the Chanel)? thank you.

[@Crypticmaskguitar]

You will need to Check the operating manual, if will state if its compatible or not - Kevin

[@rodelo.5164]

Thanks for this, question what if i use FS-5L on gt1 is it gonna work?

[@Crypticmaskguitar]

Probably not… a-lot of these units were built around the FS-5U The Manual only indicates to use the FS-5U, FS-6 & FS-7 on momentary setting - Kevin

[@alexmusic2387]

Wich one have to get for looping and on/off reverb in a Roland AC-33?

[@Crypticmaskguitar]

For Reverb / Ambience as well as chorus a FS-6 (2x FS-5U) is your desired pedal. Looper is the same Highly Suggest the FS-6 or using 2x FS-5U - Kevin

[@alexmusic2387]

@@Crypticmaskguitar Thanks for the information man. Cheers.