Triple Spinner Rings: A Silversmithing Tutorial

This tutorial shows how to make triple spinner rings. Fidget rings like this tend to be good sellers. For materials, I used 16 gauge (1.3 mm)sterling square wire, 26 gauge (.41 mm) sterling sheet, premade pattern wire, and 22 gauge (.66 mm)brass, copper, and silver sheet . As always, I use hard silver sheet solder and My-T-Flux. I also used a bit of easy paste solder at the end.
If you see a piece you'd like to purchase in one of my videos, contact through my website link further down in the description.
It is important to use safe practices when dealing with fire, sharp tools, and chemicals. Here is a video on safety: • General Silversmithing...
I enjoy sharing my knowledge with others, as I've taught people for most of my life. This hobby turned into a fun side gig for me for years while I taught public school. I love suggestions and hearing about others' experiences. What is your favorite project? What kind of tutorials would you find useful? Scroll down for information on my new Patreon!
Please feel free to share this video, and I would love to have you subscribe! Make sure to ring the bell for updates when new videos are uploaded.
I am now an Affiliate of PepeTools. Please follow this link to check out some of the great products they have:
pepetools.com/...
I just passed 14,400 subscribers! Thank you all for making that happen.
If you’d like to contribute to my efforts, or express appreciation, you can at the link below.
www.buymeacoff...
Thank you so much for all the kind words and suggestions!
Here is my website where you can purchase my jewelry, and can inquire about classes if you are in the Northern Colorado area:
www.cvpsilver.com
Thanks,
Chad Parker
Join My Patreon!
www.patreon.co...
Tier Information:
Silver Supporters
$5/month
This is a much appreciated way for you to support me while gaining access to some exclusive ad free content.
What's included
* Support The Artist
* Ad-free content
Silver Super Supporters
$10/month
You receive all benefits from the first tier as well as a shout-out on my channel. Here you will also get some behind-the-scenes peeks, and voting power concerning some upcoming content.
What's included
* Support The Artist
* Ad-free content
* Patron shout-out
* Behind the Scenes Content
* Voting power-to determine projects and influence content.
* Exclusive video tutorials
Silver Stars
$25/month
This tier provides all the benefits of the 1st and 2nd tier. In addition, you get access to a monthly live stream, a Q & A session, and discounts on jewelry.
What's included
* Support The Artist
* Ad-free content
* Patron shout-out
* Behind the Scenes Content
* Commission pieces mutually agreed upon(delivered by mail)
* Livestreams
* Live Q&As
* 15% off jewelry purchases
* Voting power-to determine projects and influence content.
* Exclusive video tutorials
Silver Superstars
$150/month
This level of membership provides all the benefits of the previous 3 tiers. In addition, it includes live-streamed interactive instruction in a small group format twice per month for 8 hours per month total. This tier is limited to 4 people for now.
What's included
* Support The Artist
* Private community
* Ad-free content
* Patron shout-out
* Behind the Scenes Content
* Livestreams
* Live Q&As
* Live Virtual Small Group Instruction
* Voting power-to determine projects and influence content.
* Exclusive video tutorials
* Commission pieces mutually agreed upon(delivered by mail)
_______________________________________________________________________
I NOW HAVE MERCH!
Click the store on the KZbin channel page to check it out.
, or here is a link:
chads-silversmi...
#jewelrymaking #silversmithing #jewelry #jewelryhandmade #jewelrytutorial #jewelrydesign #jewellery #jewellerydesign #handmade #maker #crafts #jewelryartist #bespoke #artist #silver #scrap #diy #jewelrytips #finding #bezelsetting #ringtutorial #soldering #rings #ring #geometric #simplerings #jewelrytutorial #tutorial #simplejewelry #ringbands #simplejewellery
#silverring #ringdesigns #creativejewelry #beginnerproject #simplerings #spinner #ringdesigns #kineticjewelry #rings #ringstyle #fidget #simplejewelry #fidgetring #fidgetspinner #mixedmetals
2 easy spinner rings
Triple spinners, triple the fun!
kinetic fidget rings
Making Silver Jewelry
Making Jewelry
make jewelry at home
make a silver ring
make silver jewelry
jewelry tutorial

[@sheila3845]

my son is autistic and loves spinner rings it helps calm him

[@chadssilversmithing]

That sounds like an awesome use for a spinner ring! Thanks for the nice comment Sheila:)

[@puresas]

Great video, thank you. I'm so glad you haven't fizzled out. You keep producing great video tutorials. I have learnt so much and I'm incredibly greatful. Thx Chad

[@chadssilversmithing]

I’m really glad you’re learning useful things Chris! Thanks for all the nice comments:)

[@weirdlywiredjewelry]

Perfect timing on this as I want to make one like this for a Mother with her kids' names on them. Here I thought I'd have to be mathing for the spinners, but it make total sense to go this route! It was difficult to hear you in a couple parts of the video (mostly while you were soldering), I'm not sure if there's anything that could be done about that... last thing, I've said this before, and it rings thru on this one, I'd love to see them oxidized! Thank you for the great videos!

[@chadssilversmithing]

Thanks Weirdlywiredjewelry. Sorry about that. Sometimes I forget and mumble a bit:). I'll try to do some oxidizing on some upcoming projects.

[@guntherclemenz7416]

Hello chad Isn`t better for the design to sei a gold spinner ring between the others and to set a bezel on the middle ring!!!. As silversmith you make meanwhile a good work good instructional/introduced and easy to work!!!!!! Very well Günther Michael/Germany

[@chadssilversmithing]

I bet that would look nice Günther! Thanks for the comment!

[@jimbartley9125]

Nice. I liked the way you adjusted the fit of the bands. I useful tip. I have only made the spinner ring with the flared ends before. I will have to give it a go. Cheers Jim.

[@chadssilversmithing]

Thanks Jim!

[@DianeWoods-tt4oi]

Great video Chad thanks I'm really into spinner rings right now mostly the flared ones I did one with a Handsawn mountain spinner So now want to do more styles

[@chadssilversmithing]

You're welcome Diane! Thanks for the nice comment:)

[@BackyardStoneArt]

Hi, love your videos. Do you know how to make kinetic jewelry? I have an idea to make a kinetic ring and don’t know where to start.

[@chadssilversmithing]

Hello Backyardstoneart. Thanks, I’m glad you are enjoying them. Kinetic is kind of a broad category. Can you tell me a little more about what specifically you are looking for?

[@Nikittarose]

Another great project, your channel is my go-to when I am looking for project inspiration 😊

[@chadssilversmithing]

Thanks Nikitta! That’s really nice to hear:)

[@robertbrooks6167]

Chad you got mad skills - thank you for making videos

[@chadssilversmithing]

Thanks Robert! I’m glad you are enjoying them:)

[@GilbertoPeraltaLapidacao]

Tô aqui amigo sempre aprendendo com vc like

[@chadssilversmithing]

¡Me alegro de que estés aprendiendo de estos Gilberto! Gracias por el bonito comentario:)

[@jay8353]

Morning chad,some again for asking a question thats totally irrelevant to this video, but.. I was wondering if you have done a video on a semi bezel with prongs to hold the stone in. I'm asking as I have a piece of boulder opal with some beautiful colors along the sides but it also has some issues I need to cover with bezel wire. Any help would be appreciated

[@chadssilversmithing]

Hello Jay:). You might try something like how I did this seashell. I made a sterling Bezel-like frame that was short and added prongs to the top of the sheet. kzbin.info/www/bejne/iXjZhoFuibGdptEsi=Geyramp81K9UKUGH. Hope this helps!

[@jay8353]

@chadssilversmithing thanks chad, I appreciate that, I'll have a look after work

[@tennessee1828]

Do you have any tutorial or ebook for beginners 🤔

[@chadssilversmithing]

Hello Tennessee. I’m actually working on one:). It may be a while, but here is a playlist that might help: kzbin.info/aero/PLy_X-cg7YSf8SpRAPGKxe7AdTRDwDEq-P&si=8csGxYh9-h2d33cl

[@ElinHaugan]

Those are fun to make 😊 Made one some time ago with two wires I had twisted in each direction so it looked like fish bone when the two spinning rings were side by side.

[@chadssilversmithing]

That’s a fun idea:). I’ll have to try that! Thanks!

[@ElinHaugan]

@@chadssilversmithing cool, you're very welcome, hope you'll like it 😊