Triple Transport Sewing Machine To Do Upholstery - Automotive

[@jimmyfavereau]

yes Sir! appears to be a MUST have ! after seeing you roll the material , i said to myself, NO way he will put that under the foot! learning every day Cesar! thanks so much 🙏

[@myovalsplit]

I love my Pfaff with triple transport, this one is really good. I learned sewing from you👍🏻👍🏻👍🏻

[@SIE7EJL]

Muchas Gracias Maestro. Yo he visto que muchos tapiceros usan las siguientes maquinas y Les trabajan muy bien. Juki 1541, 1508 H, DNU/ consew 225-226rb, Pfaff 145 / singer 211. Sera que casi cualquier maquina de double y triple arrastre sirve para la tapiceria sin importar mucho la marca ?

[@Cechaflo]

Es correcto lo que Ud. comenta, con cualquiera de las máquinas que Ud. menciona se puede hacer tapicería. Las de doble y triple arrastre fueron diseñadas para este trabajo.

[@fernandojeronimo5763]

Vai depender da aplicação. Top e a 1245 pfaf

[@marinaloaiza1699]

La 955 paff también???

[@marinaloaiza1699]

Mil Gracias por su atención y respuesta. Muchas Bendiciones desde Medellín Colombia

[@عليالجزائري-ط6ر]

I know it's one of the best machines in the world by its famous name

[@Cechaflo]

These made in Germany machines are well recognized all over the world and were done to last forever. Thanks for watching the video!

[@WiWaChanpi]

It seems noisy. That high pitched drone would hurt my head.

[@frankdearr2772]

Great video, thanks 👍

[@LilDirt12]

This is the machine dreams are made of. It's a work of art. As well as operator. 😉 Thank you Cesar.

[@michaelclark2840]

Very good explation, thankyou.

[@dztoufik6949]

your védeo is very important for me thenk you

[@ehuyustus]

Hola, soy de Bolivia, y agradezco que comparta sus conocimientos, quería realizarle una consulta: tengo una máquina ribeteadora cobalt, como puedo hacer que la pata de levanté más alto, al momento de coser, pues como es baja algunas costuras no pasa con facilidad, le agradecería mucho si ayuda, saludos y éxitos.

[@Cechaflo]

Estimado amigo, lamentablemente nunca he tenido una máquina marca Cobalt y desconozco sus mecanismos. Pero sucede que la mayoría de estas máquinas de triple transporte son muy similares. Para levantar el pié de presión mas alto hay una tuerca ala de mariposa en la parte de atrás de mi máquina Pfaff. Es el regulador de altura del prensatelas para más alto y mas bajo. kzbin.info/www/bejne/nV6ZZYqNdsR4brMsi=AfzrFLpLljReM9QR&t=163 Hay otras máquinas que llevan una tuerca normal. Se tiene que aflojar y recorrer el regulador hácia arriba para que los piés de presión levante mas.

[@CARLOSPEREZ-oc8ib]

Preciosa Maquina muy fina alta calidad alemana

[@AloveDforever]

Hi Your videos are very helpful , Thanks for sharing with us. I'm looking to join in this industry and to fix interiors car's Also I have a question: Which machine you are using? Thanks

[@Cechaflo]

Hello, I am glad to share some of my upholstery knowledge! I am using triple transport sewing machines: Pfaff 1245-706(the one of this video), Durkopp&Adler 767-FA/373( I show in this video:kzbin.info/www/bejne/bnK3ZqR6n9yAqbs: and one double needle, post bed sewing machine (kzbin.info/www/bejne/rIaXnnSrfZaslbc) I would advise you the use of a triple transport sewing machine. Not necessarily the Pfaff trade mark. Consew, Juki, Adler, Singer triple transport are also excellent machines to start doing upholstery. Welcome to this channel anytime!

[@AloveDforever]

Hello Thanks for your answer, I found two machine, but I don't know what the difference. And I want to ask you which one do you recommend me. Pfaff 1245 , 706/47 Or, 1245 706/05 Thanks

[@Cechaflo]

Both machines are German manufacturing and very similar. As both of them are used ones you would have to choose the one that is in much better condition. The salesmen could give you a better assistance on this issue.

[@garygerard4290]

I was watching a video of yours on sewing square corners and noticed that you needle was moving forward with each stitch. I don't think my Sailrite walking foot does that - the needle only goes up and down - the bottom dog moves backwards and so does the presser foot - I'm going to take a look at that tomorrow AND be watching more of your videos - thank you

[@Cechaflo]

The machine I show in this video is a 'triple transport machine' designed for thick materials. Three mechanisms take part in to drag the material backwards or forwards: needle bar, feed dog and small presser foot. The Sailrite you mentioned is a 'double transport sewing machine' also designed for thick materials. Two mechanism take part dragging the material: feed dog and rear presser foot. Both models are also called 'Walking foot machines'. Sailrite also sells triple transport machines which are capable of sewing thicker materials than a double transport machine.

[@garygerard4290]

@@Cechaflo thank you so much for this response. I'm just getting started sewing. There is so much I can learn by watching videos and o boy, you have a lot - thank you

[@beniciamendoza8731]

Me encanta ya e trabajado en ellas y son expectacular si tuviera los recursos la compraría

[@Cechaflo]

Esta máquina es usada y está costando aprox. 1000 dólares americanos en Mexico y en otras partes también. Es muy similar a la 145 y 545 de Pfaff.

[@jeffdenig705]

Any thought of going to a servo motor? I saw how you slowed down a clutch. For a beginner a Servo is Indispensable. Right now I have a double feed with mc-scr servo like and a couple of triple feed clutch. I can't wait for my servo motors to arrive later today. Absolutely No Way I could have progressed as far as I have without the servo. With Vinyl and Leather - the placement of EVERY Stitch needs to be controlled.

[@Cechaflo]

Definitely a servo motor is a much better device for beginners and professionals. I will buy one at any moment. The tricks of 'slowing down the speed' are only a 'just in case option' if we can not afford one.

[@docfischer7291]

I was hoping they came out with a new design machine ! Your title confused me ! Unison feed and also compound walking foot . 🤙🏼 Love my 111w154 !

[@margyskaarhaug6468]

Added length to the clutch lever, boy did that ever bring on alot more control

[@Cechaflo]

I was also confused as you are about these machines when I started doing upholstery more than 40 years ago. I was used to a domestic Singer and a Union Special sewing machines(regular machines to do garment and shoemaking) I did some adaptations to my machines and was able to do heavy duty upholstery (similar to the machine I show in this video: kzbin.info/www/bejne/jJCsipmmbN91nKs As time passed by, suddenly I realized there were new options to improve our upholstery job and I made up my mind to go along the new technolgy.

[@margaritafuente8954]

Hi! Its a great machine. I am looking for one of those for my company. Do you think it would be posible to buy one here in México??

[@Cechaflo]

This machine 1245-706/47 is an old version (this model was launched in the seventies approx) It is similar to 545-H3, and 145-H3 which is much older but also very powerful. The new version of these models is the Pfaff 1245 (just 1245) The stitch is longer and has a jumbo bobbin. You could get them on internet or facebook. Mercado libre is a good option too. For instance: articulo.mercadolibre.com.mx/MLM-818740508-maquina-triple-avance-_JM#position=22&type=item&tracking_id=ecd2b707-a1a4-4f15-bbaf-63369be94396 pfaffmexico.com.mx/producto/pfaff-1245/

[@Moviesmaxcrazy]

What kind of machine are you using and when I need to use zipper foot for zipper how do I do that on this machine?

[@Cechaflo]

This is the 'zipper foot' for Pfaff 1245 :www.amazon.com/PFAFF-1245-SINGLE-RIGHT-ZIPPER/dp/B01NBAFSFJ kzbin.info/www/bejne/gKamgoSjj8Ssn5Y

[@systemunderground]

Do you have a speed reducer? That looks slower than my Seiko Cylindrical machine with servo.

[@Cechaflo]

Actually, I got a better control of speed by reducing to a smaller pulley and enlarging the motor lever as show in this two videos: kzbin.info/www/bejne/a2HafKKXipqonc0 kzbin.info/www/bejne/j3XMqpmcmr2fm8k

[@hilquiasalvino6342]

Caramba deve ser uma nota preta uma máquina dessas!!

[@JoseSilveira-newhandleforYT]

Nova equivalente www.sieck.de/en/machines/sewing/arm-type-machines/?produkt=5108 Usada igual www.tzsupplies.com/pfaff-industrial-sewing-machine-1245-i2657323/

[@ARTHUR_8989]

I have PFAFF 1245 breaks the needle, please show me how to fix it

[@Cechaflo]

First, I would suggest to detect at what moment the needle is breaking and against what. If the needle breaks we suppose it is hitting some other piece.

[@fernandojeronimo5763]

1245 e top

[@joserobertocuccocucco406]

Máquina de costura pfaff 545 transporte triplo muito boa tive uma vendi e me arrependo até hoje, Rancharia SP Brasil

[@Cechaflo]

Never is late to get another one. Thanks for watching!

[@Users_rx]

My god that is a very heavy duty machine! Love it! It is pricey i bet

[@elpete1467]

What is the type/name/model of that small foot on the video?

[@Cechaflo]

www.amazon.com/HONEYSEW-Single-Left-Pfaff-Walking/dp/B072VC712W

[@elpete1467]

@@Cechaflo Thanks.

[@ulisesalbertochambiromano6123]

Hello colleague, a question how can I make to lengthen the stitch of my consew 206rb-1 triple feed machine is very short, it only gives me 4.5 mm. I await your answer, thank you.

[@Cechaflo]

Your machine is supposed to give a 6 mm stitch length at least. One cause could be when the feed dog is too low and does not drag properly heavy materials. If the stitch length is larger with thin materials, then the solution would be to lift a little bit the feed dog. The second common issue happens when the 'small foot' does not 'touch' on time the 'feed dog'. Do a test with a piece of paper and no thread on the machine. The stitch length should be the same forwards and backwards. The needle should meet the same needle hole. The solution would be to adjust the alternating foot.

[@arifmansuri5633]

What is your using sewing machine and price because I need it's machine so please help us

[@Cechaflo]

This is a Pfaff 1245-706/47 (old version made in Germany). Another similar older versions are Pfaff 545-H3, 145 H3 These used machines are around 7000 to 1000 USD. An idea to look for these machines: www.advancedsewing.com/usedsewingmachines/pfaff.html

[@kamalkamel6185]

Look for sewing machines, gloves of the pure leather type, and machines for sewing leather clothes

[@raulduke85]

Can you suggest a sewing machine on budget to work with leather please?

[@Cechaflo]

I only could suggest a link for used sewing machines in USA : Consew, Juki, Pfaff, Adler, Singer, etc. are good ones. www.advancedsewing.com/usedsewingmachines/consew.html

[@docfischer7291]

Look for a old Singer 111w15x (111w154 and 111w155 are very common in the series . They are plentiful and many many companies used the exact design for decades) Just have to learn how to work without reverse. If you are nimble with your knee lifter you can master it as I , young grasshopper. And watch his videos closely , there are plenty of instances that reverse is skipped and the knee lift was used and material is just pulled back into position to start sewing again over that area just like a back stitching. 👍🏼

[@pauloalves6069]

@@Cechaflo quero uma dessa com faço pra obter

[@Cechaflo]

@@pauloalves6069 I have found some information on internet: lista.mercadolivre.com.br/industria-textil-e-confeccao-maquinas-costura/usados/maquina-costura-transporte-triplo-industrial-usada_ITEM*CONDITION_2230581# lista.mercadolivre.com.br/industria-textil-e-confeccao-maquinas-costura/usados/maquina-de-costura-reta-transporte-triplo-usada_ITEM*CONDITION_2230581# produto.mercadolivre.com.br/MLB-1088189146-maquina-de-costura-pfaff-545-semi-nova-transporte-triplo-_JM produto.mercadolivre.com.br/MLB-1077898764-reta-transporte-triplo-pffaf-545-seminova-com-garantia-e-nf-_JM#position=1&type=item&tracking_id=8314f523-eabd-48a0-a19f-af24e9a8bd96 produto.mercadolivre.com.br/MLB-1031339363-transporte-triplo-plana-juki-dnu-241-h-revisada-completa-_JM

[@mykalimba]

It's a bit confusing why it's called "triple" transport, when there appears to be only one action that is moving the work through the machine. In the side view at 3:00, we see that the small foot and the needle bar are literally connected to each other mechanically, so wherever the small foot goes, the needle bar will go automatically. Seems like that should count as only one moving part. I do see that the feed dog mechanism is a separate part (sure, everything is all connected eventually, but we can view the feed dogs as having a different purpose), so that should count as a different moving part. So adding the small foot mechanism, I only see 2 mechanisms transporting work through the machine.

[@Cechaflo]

Three mechanisms take part in to drag the material (fabric, vinyl, etc.) backwards or forwards: needle bar, feed dog and small presser foot. The three parts work out at unison transporting the material to the back or front.

[@mykalimba]

@@Cechaflo I see what you're saying, but the point I am trying to make is that it is impossible for the needle bar and small presser foot to work independently of each other, so it seems like those should be considered as one mechanism, not two separate. Maybe the three mechanisms are supposed to be: needle bar (including small presser foot), feed dog, large presser foot? Ultimately, it doesn't really matter if I can't understand why the 3 parts are those 3. What you are demonstrating is what the industry considers a triple transport to be, and that's what's important here.

[@Cechaflo]

@@mykalimba I now understand your point of view and it makes sense. Alexander Dyer's got interesting videos about it. I hope it helps. kzbin.info/www/bejne/l6fVZKOElNqXg6M kzbin.infosearch?query=triple%20transport

[@yeojianhuiedmund614]

What is the model of this machine Sir?

[@Cechaflo]

It is a Pfaff 1245-706/47(old version made in Germany)kzbin.info/www/bejne/nV6ZZYqNdsR4brM

[@colinchalmers1099]

Is this also called a compound walking foot Cesar? Colin.

[@Cechaflo]

Dear Colin, Yes it is a compound feed sewing machine. It is also called unison feed. Thanks for watching the video!

[@emmanuelrodriguez8543]

Maestro mi maquina hace lps movimientos que usted dice la barra de la aguja y el pie pequeño se mueven de atras hacia adelante y el pie q camina es el que prensa la tela tal como lo muestra usted en el video al principio .entonces llego a la conclucion que esta maquina consew 206RB-5 walking foot single needle es de triple arraste. Muchas gracias maestro por su ayuda ahora ya se distinguirlas

[@Cechaflo]

Asi es, su máquina es de triple arrastre. La puntada estandar en tapicería es de 4, 5 a 6 mm. La puntada de 10 mm se usa mucho en los muebles y con hilo grueso como decorativo. Las máquinas de doble y triple arrastre son llamadas 'walking foot' (pié caminante) y son las ideales para hacer tapicería. Las de triple las consideran las mejores. En este video se ve una de doble arrastre. Podemos darnos cuenta que el peine es como las máquinas simples de costura que está en contacto con la 'pata' grande de atrás para jalar el material. kzbin.info/www/bejne/oKG8qZ-Zor6pq7c

[@emmanuelrodriguez8543]

@@Cechaflo muchas gracias maestro por su ayuda

[@Cechaflo]

Este es el manual de su máquina. www.consew.com/Files/112347/InstructionManuals/206RB-5.pdf Estuve leyendo las características de su máquina y de verdad dice que la máxima puntada es de 10 mm. Es una versión moderna al igual que la 1245 moderna que su puntada también es de 10mm. La verdad mp se que le está pasando a su máquina que debe dar los 10 mm. En features (características): dice 2 1/2 S.P.I. (STITCHES PER INCH)(2 y media puntadas de 10mm por pulgada) www.consew.com/View/Consew-Model-206RB-5

[@emmanuelrodriguez8543]

Buenas noches maestro sí, la verdad no se porque no da la puntada de 10 milimetros cuando le pongo en el numero 10 y no le entiendo mucho al manual porq no se mucho ingles haber si me puede usted ayudar en lo mas importante sobre lo que dice el manual sobre mi maquina se lo agradeceria maestro. Muchas gracias

[@Cechaflo]

@@emmanuelrodriguez8543 Haga una prueba con un pedazo de cartón delgado, colocando la perilla reguladora de puntada en el 10 y coser sin hilo. Después de coser hacia adelante unas 8 a 10 puntadas, accione la reversa para que la aguja se desplaze hacia atrás por los mismos huequitos que se hicieron. Es decir deben coincidir exactamente. De no ser así, no estaría coordinado el movimiento de la pata y el peine, ocasionando una puntada menor.

[@morefreshfurnitures2035]

where can I get some to buy

[@Cechaflo]

You could get used sewing machines on internet. For instance: www.machineseeker.com/Sewing-machines/ci-579

[@lyslebel8577]

This IS walking foot?

[@Cechaflo]

Yes, it is. Walking foot is a general term for the triple and double transport sewing machines. In triple transport machines the walking foot is the small one. In double transport machines the walking foot is the rear foot.

[@lyslebel8577]

@@Cechaflo great explanations. So, the fabrics can't move as plastic or heavy wool. Thanks

[@Cechaflo]

@@lyslebel8577 It is right!

[@R_Lik]

Hello Вы прижимную лапку полировали ?

[@Cechaflo]

No, it isn´t. The day light makes it appear polished.

[@mariafiorino5388]

Mi piace questo piedino!!si può Aquistare ??

[@Cechaflo]

On Ebay, Amazon, Ali Express, etc.www.ebay.com/i/142496639509?chn=ps&_ul=MX&dispctrl=1

[@jerrydelacruz5119]

Just like my Consew 225.

[@Cechaflo]

All the triple transport sewing machines are good to do heavy duty upholstery independently of trade mark. I mean, Juki, Consew, Pfaff, Singer, Brother, Adler, etc.

[@allandawat4338]

how much po yong gangyang swwing machine?

[@Cechaflo]

This used sewing machine is 1000 USD more or less.

[@margyskaarhaug6468]

Love my 111 153

[@Cechaflo]

Thanks for watching!

[@maisarkabarah1970]

كم سعر هذه الماكينة بلدولار

[@Cechaflo]

A used machine like the one of the video is around 1000 USD

[@jayanathkasthuri1135]

I,need one how much price

[@Cechaflo]

These used machines cost 1000 USD approx.

[@bratsk_rulit]

Какая модель машины?

[@Cechaflo]

Thanks for watching!

[@ЛЕХАТЫБЫЛПРАВ]

Пфафф, в самом начале полная маркировка

[@ВикторВагузов]

Пиши на английском!)

[@vadim3976]

Чувак, ты совсем видео не смотрел? 0:00-0:06 Это же ни в какие ворота не лезет.

[@vadim3976]

@@Cechaflo yeah "watching" :)

[@gelocontas8391]

no entiendo

[@user-mn1ws3uk6g]

👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼

[@Cechaflo]

I really appreciate your kind remarks!

[@Daddakh]

👍🏽👌🏾🙏🏾

[@Cechaflo]

Thanks for kind remarks!

[@kurbanbayevstudio]

У меня китайского производства с бесшумным двигателем

[@ВладимирЖуравлев-х7е]

Это не значит что она у тебя лучше))) У этой машине PFAFF фрикционный двигатель идеально настроен!!! И плавность хода в разы лучше чем на серво моторе.