Triumph daytona 675 ecu location

How to access the Daytona 675 ecu and gas tank removal instructions

[@Samibz]

FYI it doesn't matter if you have a full tank of gas, it won't drain out of the line once it's disconnected.

[@SK-zm8iu]

This was very helpful! I have 2 questions for you. 1. How many connections are under the fuel tank for when i have to take the whole tank off? 2. Is ECU the part on the bike which is used to cancel a check engine light? And am i supposed to use a OBD2 tool for it?

[@henrymatthews9365]

There are 2 connections attached both I think on the tank. 1 is the fuel pump connections and the other is the fuel line connection goes from the pump down to the rail. 2ND YES if you have a check engine light you need a scan tool to clear it or find out what's wrong. Typically on these it's the exhaust valve code.

[@henrymatthews9365]

I use a program called tune ecu to make the bike forget about the exhaust valve and leave it wide open. Also I make my intake flapper valve open at a lower ecu.

[@SK-zm8iu]

@@henrymatthews9365 thank you. I have one more question about my motorcycle but it's unrelated to the gas tank. If you can, please answer it: I got a check engine light because of a faulty o2 sensor. I got the new sensor. When i change it, will the check engine sign go away on its own?

[@henrymatthews9365]

The obdII port is under the seat near the battery.

[@henrymatthews9365]

Tune ecu also come with an obd2 cable connection to USB you plug into your computer and download and install the program to communicate with the bike. I have a video detailing the process but haven't released it because the video quality is not good

[@jerryx2000]

Is this the same for the 765rs?

[@henrymatthews9365]

Probably the same. The placement looks like the same. And also the platform looks similar.

[@liamfisher4191]

What is the ecu model number please .I need to replace mine

[@user-ur2go9mq4j]

What is your top yoke please??

[@henrymatthews9365]

What do you mean by top yoke?

[@henrymatthews9365]

If you're referring to the triple tree it's the one that came stock on the bike.

[@alwaysaswish]

question for ya, is there a little bit of wobble once all put back into place? Not a lot but just a little

[@henrymatthews9365]

Nah no wobble for me the two Allen's at the top should be flush if you do have a wobble check to make sure your fuel hose isn't pinched everything underneath should clear the belly of the tank with ease nothing should touch

[@henrymatthews9365]

Sorry just getting back to you hope this helps

[@alwaysaswish]

Henry Matthews hmm, I checked everything, seemed like all was clear. I'll double check. if not ill post a video of wobble

[@hankmatt1]

Derrick Marks is it wobbly while all the bolts are in and it's this the tank your referring to as having a wobble or ECU or air box housing

[@alwaysaswish]

hankmatt1 its wobbly after all put back into place