TRIUMPH TRIDENT 660 | LOWERED FOR SHORT RIDERS

[@niaguinalde]

Wooow, isa rin to sa mga dream bike ko kaso 5" flat lang ako. Mukhang magagawan pa rin ng paraan haha. Ganda ng review vid sir!

[@scalemodeltutor9841]

Kagandahan lang sa mga kinulang sa height, ang gandang tingnan kapag nakasakay na sa motor, parang nakasakay sa kabayo. Problema ko naman sobrang tangkad ko, yung bigbike nagmumukhang raider sa akin. Ang mahal naman ng nga liter bike para bumagay sa akin at sobra na rin sa needs ko.

[@markanthonymaqui]

Mag cousin pala tayu,. mag cousin tangkad hahaha by the way thanks for this video.

[@teddysurf]

Do you by any chance know the ground clearance before you lowered your bike? I bought a used bike and the kickstand scrapes on the ground when I engage it and I’m trying to determine if the person that owned it before me lowered it. Where you measured the ground clearance I measured about 5 1/2 inches.

[@chatoytv8349]

Good day sir ask ko lang kung brand mismo ni triump lowering kit or after market din?

[@jeffmark5338]

sir idol pagnagcutdelete po ng pipe pina remap nyo po ba ? o hindi na? salamat

[@mekamusika2072]

Video summary in English 😊 For now, here are the things that are shown on this video - Suspension link replacement (lowering link) - Front forks adjustment - Setting your rear suspension’s pre load adjustment to the softest, as this will help the bike lower down when you ride it - Chopped off seat (reduced the amount of foam) - Chopped off side stand - Wearing a pair of boots while riding, as this will help short riders ride the bike, since boots have thick soles The only con of lowering your bike is the ground clearance will be very low, to the point that the oil pan will scrape if you don’t really slow down when passing through speed bumps. Hope this helps 😊

[@clarksevent6734]

paps pwede pa.share saan nabili yung lowering kit sa rear suspension?

[@AmanKumar-xp5uy]

Thank you so much 😊

[@mnltcanceran7530]

Ang gwapo ng motor mo lods parang tayo lang haha, pa shout out naman sa susunod na video at sana yung fuel consumption naman ng trident 660 ang sunod na i-topic mo.

[@snldigitalmoment]

Salamat sa info Boss

[@kimmmoy]

Maganda yung review mo, tol. Saan ka pala kumuha ng suspension link? Kudos!

[@saoribernardo702]

ANO PO TAWAG SA PINAGPALITAN NG LOWERING KIT? MERON PO BA SA SHOPEE OR LAZADA NYAN? NEED NA PO KASE IBALIK SA STOCK

[@luiantonio8106]

Nice

[@chillvibeswithstickshit8391]

anu po ba mga issues nang trident sir honest review naman

[@successfulengineer1192]

Ilan na po yung seat height nya from 805mm?

[@olanidol]

Nice video bro..very informative

[@joncee9159]

Boss putol mismo sa stand ng trident ginawa niyo? Or bumili kayo additional /aftermarket side stand tapos Yun pinutol and kinabit niyo? Thanks po

[@mekamusika2072]

pinutol po mismong stand nung trident

[@arrinejed2038]

Idol ano po ground clearance ng trident 660

[@snootchiessnooginz747]

Rocking the Docs bro! Very nice🤙

[@mikemedina5581]

Hi, thank you for sharing same height po tyo, however, it would be better if you put a link or reference saan po pwede pagawa or binili lowering kit, seat trim, etc. and how much po. Thank you.

[@mekamusika2072]

yung lowering link po is sa triumph greenhills mismo galing yung tabas side stand po is gawa ni Orion muffler, sakanila namin pinatabas para precise ang pagkaka welding then ung tabas seat naman po is gawa ni all about covers. Pwede nyo po sila i search sa fb. I would suggest na pag pupunta po kayo sa shop ni all about cover, ung seat lang po mismo dalhin ninyo and wag kayo magdala ng bigbike, mejo makitid po yung daan papasok sakanila. Scooters/underbone na motor lang po iaadvice ko na dalhin ninyo

[@mikemedina5581]

@@mekamusika2072 Thank you Lodz, last na po, magkano po lowering kay Triumph parts and labor at magkano po naman seat trim kay all about cover? Thank you ulit.

[@mekamusika2072]

@@mikemedina5581 yung sa lowering link nasa around 12k yata sir including labor then yung tabas seat nasa 1k

[@mikemedina5581]

@@mekamusika2072 thank you lodz sa fast reply. Ingat po. Ride Safe

[@RoyetBulaon]

Nice bike, Abot ba sir ng 5'4'' without adjustment as in stock?

[@mekamusika2072]

baka mejo tip toe sa 5’4 I would suggest na i try nyo nalang po sa showroom ung bike, to see if okay yung stance sa 5’4. If hindi naman, we have the solutions na pwedeng gawin to lower the bike 😊

[@robertoerquiaga8603]

Sir tanong k lang ako remedyu ng says dahil sa humps

[@JeoRX]

Pwede po kayang ipalowered na yan bago kunin sa kasa? 😅

[@Handleme149]

Boss, san ka po bumili ng Dr Martin’s na boots? True to size po ba siya?

[@mekamusika2072]

padala lang po bossing di ko lang alam kung may DM boots pa dito satin eh

[@kyledeleon1370]

5'2 pero cute ❤️

[@marlonlugue5888]

Kamusta init sa heavy traffic?

[@mekamusika2072]

Common issue na yung pumapalo pataas ung temperature kapag stuck ka sa heavy traffic, pero bumababa din naman agad once maitakbo na and makasagap na ng hangin ung radiator.

[@robertoerquiaga8603]

Sir naka bili k n skid plate para sa trident?

[@otikbasalo]

Ayaw ko nang kunin yung trident. Huhuhu! Natatakot na ko na matumba kasi 5 flat lng ako. Hahaha!

[@saeldaya]

Grabe shave seat na and may lowering links tip toe kapa din 😔. Gusto ko din pa install ng lowering links para flat foot ako.

[@elvinagracebejo3089]

hnd ba pwd isagad gang handle bar ung dulo ng fork shock

[@mekamusika2072]

Pwede naman sir depende sa preference mo, Kaya lang sobrang baba na nyan pag sinagad pa. Yung ganyang set up palang nung saken sumasayad na sa humps, what more kung ibababa pa sya ng sagad. Baka mas lalong sumayad ng sumayad. Depende nalang po talaga sa preference ninyo 😊

[@rianerivera5505]

Kumusta po pag may angkas na?

[@mekamusika2072]

di ako nag aangkas sir hehehe nag aalangan ako dahil mabigat yung bike tapos mejo mataas, di ako kampante mag angkas dito.

[@kristophersibal2690]

Boss magkano inabot ng pms ni trident 660? Sana manotice thank you

[@mekamusika2072]

kung change oil lang around 2500 to 3000 yan

[@DonquixoteDofen]

Boss may contact # po kayo ng binilhan nyo ng lowering link sa greenhills? sana po mapansin, Thankyou!

[@mekamusika2072]

sa mismong casa ng triumph greenhills boss. punta lang po kayo doon.

[@DonquixoteDofen]

@@mekamusika2072 alloy po ba yung ginamit sa lowering kit na nabili nyo sa triump greenhills?

[@mekamusika2072]

@@DonquixoteDofen steel

[@walterwhite3189]

Lizard crew😍🥰

[@jeromecantonjos5902]

Pude pala aq jan 5'6

[@paulinoo2]

English subtitles would be nice !

[@mekamusika2072]

That would be a great idea for my next contents 😊 For now, here are the things that are shown on this video - Suspension link replacement (lowering link) - Front forks adjustment - Chopped off seat (reduced the amount of foam) - Chopped off side stand - Setting you rear suspension’s pre load to the softest adjustment, as this will help the bike lower down when you ride - Wearing a pair of boots while riding, as this will help short riders ride the bike, since boots have thick soles The only con of lowering your bike is the ground clearance will be very low, to the point that the oil pan will scrape if you don’t really slow down when passing through speed bumps. Hope this helps 😊

[@paulinoo2]

@@mekamusika2072 thanks for these details !! how much lower from original height did you get ? (i have a similar problem)

[@mekamusika2072]

@@paulinoo2 wasn’t able to measure it exactly. Just to give you an idea, I’m having a hard time riding the bike when it’s still on stock suspension link, wasn’t even able to reach the ground with my toes.

[@shivaprasad2036]

@@mekamusika2072 how much the seat has been lowered? What about ergonomics of the bike? Was it same or changed??

[@7Archie4]

naka tulong... not favorable ang 5 inches clearance...

[@FixRight]

The title is in English. Why isnt he speaking English?

[@mekamusika2072]

Because I am a Filipino 😊 Video summary in English 😊 For now, here are the things that are shown on this video - Suspension link replacement (lowering link) - Front forks adjustment - Setting your rear suspension’s pre load adjustment to the softest, as this will help the bike lower down when you ride it - Chopped off seat (reduced the amount of foam) - Chopped off side stand - Wearing a pair of boots while riding, as this will help short riders ride the bike, since boots have thick soles The only con of lowering your bike is the ground clearance will be very low, to the point that the oil pan will scrape if you don’t really slow down when passing through speed bumps. Hope this helps 😊

[@ronbug1091]

boss ano fb mo