Trouble shooting a No Start, 2007 Ford Edge Won't Crank....Clicks...Solved...

Car won't crank. Battery cables and Terminals all looked clean. Battery was jumped. The car would not start. Just makes a Clicking noise. Key would turn, radio would turn on but no crank. Attempted to start the car at least 10 times. The car was parked and completely off when this happened. Fuses and relays were checked.

[@peterl6095]

UPDATE- Hey guys, thank you for watching this video...if this has helped you out in any way please SUBSCRIBE, press that LIKE BUTTON and leave a COMMENT. Please check out these links that may SOLVE YOUR NO START ISSUES. amzn.to/3tvM0jd amzn.to/3xUrWKX amzn.to/3uuLxiA amzn.to/3erjviy Analyze your car issues and ERROR codes and clear them with this Amazingly accurate yet inexpensive OBD2 SCANNER- amzn.to/33rovxg Wireless Scanner amzn.to/3nYbjtb Test your Battery and Alternator amzn.to/2QWtGCU If you would like to help this channel, your donations are appreciated. Cashapp- $PeterLCG Venmo- PeterLCG THANK YOU

[@JohnSmith-gu6hf]

Just a suggestion - You have good content because you are talking about problem other people have had but your videos are almost unwatchable. My car is having the same problem and I suspected that it was the starter. Try not moving around the camera as much. Shorten the video to 5 minutes. Describe your problem and solution.

[@andyortiz5710]

Did u ever solve the issue currently got an 07 that doesn't start but gets power

[@JohnSmith-gu6hf]

@@andyortiz5710 replac we d rhe starter motor and that solved the problem.

[@andyortiz5710]

My mechanic says the starter is not the problem...

[@kikerivera1779]

don't keep moving the camera 🎥 PLEASE!!!! PLEASE!!!! PLEASE!!!!

[@2202nick]

Got to be the crank over fuse fluid

[@dabullq5763]

You literally kept saying different parts and saying thats not the problem ????? What a waste!

[@RafananClan]

Moral of the 12 minute story: Never buy re-manufactured anything for mission critical components. Always buy OEM.

[@rauljimenez4099]

What was the problem peter I have the same situation

[@bbruuse]

my wifes car would not start 2007 ford edge, lights work, radio - everything good, had new battery 7 yrs ago... MMMMM heres what I found... the positive battery post connector , which was tight was actually able to be turned with very little effort... HHHMMM - ford changed the old way they made this... somehow the connector is bad and won't properly tighten so ... it now doesn't have good enough connection to start... i possibly may be able to shim the post to make a better connection? I'll get back to you

[@CPEnge-de7ww]

The problem, the contacts on the starter relay. The relay mounted on the starter!

[@2202nick]

Maybe it's the crank over

[@petegilbride8978]

Ignition switch. It wears out. VERY common problem on Fords of that generation.

[@justinervin8220]

Yep

[@2202nick]

Don't you mean turn over

[@CPEnge-de7ww]

If theft light blinking, reset the system by disconnecting the battery. No crank!

[@MrGems1971]

What was the problem yaar?

[@2202nick]

Crank over fuse trouble over crank over fuse

[@2202nick]

Whole entire crank over

[@kovoor7]

What is this?

[@2202nick]

"Crank over" wtf

[@beatquakemusic9543]

What ended up being the problem?

[@Decimusblack88]

I bet it's the negative ground wire to chassis is corroded

[@thomascox1185]

This video made me dizzy af and sick

[@jaydeeh1904]

So what was the issue?

[@Ttcw89]

The Starter

[@dianaa5231]

Hi Peter, my husband been watching your videos for a while. We were hoping you could give him some advice. He chaged the timing belt on a 2001 rundra, but now it won't start. Any ideas?

[@peterl6095]

Is it a no Crank no start or a crank no start?

[@dianaa5231]

@@peterl6095 crank

[@dianaa5231]

@@peterl6095 crank no start

[@peterl6095]

I'd try to help you out but there's so many parts you have to take out to get to the timing belt. Maybe he didn't screw in a ground somewhere and that's causing the issue?

[@ivanpetrenko3393]

If its timing belt than all camshaft gears and harmonic balancer need to be lined up. It won't start otherwise. Also installing it wrong can cause bent valves.

[@2202nick]

OEM Crank over

[@2202nick]

Alternator crank over

[@2202nick]

Crank over

[@ChipperTheChipster]

Why did you comment like 7 times?

[@NicholasMartin-ph3el]

Absolutely terrible video. Try actually showing the work instead of droning on forever.