Thanks! You just saved my 90yo Mother an expensive repairman visit. She had inadvertently placed a garden stool in front of the sensor.
@wilbrown43373 жыл бұрын
Hi there- Just wanted to send a short note to say Thank You! Your information allowed me to address a wiring issue.
@josettea93464 жыл бұрын
You helped me fix it myself. Was sensors not aligned as you said. 3 flashes as well. Thank you
@markkurchak90022 жыл бұрын
Thanks! Your instructions fixed my problem. Thank you!
@cesarviana4917 Жыл бұрын
Thank you very much for sharing your knowledge !!!!!
@mickjones28714 жыл бұрын
Thank you!! Just bought a house w remote garage doors. The eyes were dirty that's all. Ran my finger over & removed the dust.
@jopicter2 жыл бұрын
Great explanation and to the point thank you!
@libiajimenezchavez46042 жыл бұрын
This worked for us! Thank you! Wouldn’t have figured it out with you.
@blackwavetactics4 жыл бұрын
This helped my issue in a brand new home. Thank you!
@JasonfromMinnesota Жыл бұрын
Thank you great videoGreat explanation and to the point thank you!
@jaholm4 ай бұрын
Thanks, was a loose screw on unit, my doing after installing wyze garage controller a while back
@camillejarrett50083 жыл бұрын
It was the eye, wasn’t lined up properly. Easy fix, Thanks!
@empoweredchurchnyc4324 жыл бұрын
Great video! Very helpful!
@vikrantdalwale84545 жыл бұрын
Thanks for the tips...it fixed problem with my garage door opener. 👍👍
@AlchemyYogaCochrane4 жыл бұрын
We have a linear system and we the main unit throws the beam code on sunny days. We need to override each time. What do suggest we do so we don't get interference from the sun?
@clementkey8473 жыл бұрын
good video, thanks for helping solve problem.
@iantaylor9172 жыл бұрын
Solved my problem. Thanks!
@wasupwilly2 жыл бұрын
Would the remote control also quit working if the eye was offline
@DaKydd0073 жыл бұрын
Just stared having an issue today. The eye on the rught(standing outside the garage is not responding or no power(the green LED is off). I’ve checked the wiring on the unit, made sure nothing obstructing the beam, and removed the unit to send directly to the other my aiming from closer view. What is the issue and what are the warranty on these? (LD033)
@glorialoflin55218 ай бұрын
How to use a different brand remote
@wsarkizi2Ай бұрын
How come garage door opener just flashes rapidly. My other remote works fine. I keep re binding it to the opener but it clicks and blinks like it's connected but all it does is flash rapidly when I press the remote botton
@HowToDoitright10 ай бұрын
So I have a weird problem that my garage door keeps closing even if somebody comes in between the sensor, it will not stop and keeps closing. I see it as a safety issue in case a kid comes in the middle. The door will not stop. I do have sensors and they sent something as I can feel a little hesitation on the door, but it keeps on closing what could be the issue?
@amandamorse728010 ай бұрын
You're correct - this is a safety issue. I would recommend calling a local service company to diagnose and fix the issue.
@C-Redz3 жыл бұрын
Quick question we are buying a house and the garage door open and closes just fine but the sensors do not work if the beam is broken to send the door back up. Any ideas what is going on, everything I see is the door won't even close if the sensors don't work.
@kdmiller903 жыл бұрын
Our garage was flooded now we have moisture and dirt inside one of the eyes creating an issue... Can they be taken apart or do I need to replace?
@ContinentalDoorCompany3 жыл бұрын
They are sealed units. You will have to purchase new ones.
@kdmiller903 жыл бұрын
@@ContinentalDoorCompany thank you
@chulajuana361 Жыл бұрын
Motor clicks briefly but doesn’t open. Same results on all devices including wall unit.
@themadasshatter10884 жыл бұрын
Thanks dude
@therookie52635 жыл бұрын
I got 6 flashes...says call for service....circuit board??
@glorialoflin55218 ай бұрын
Ty
@derikmorse20184 жыл бұрын
Yeah sounds like you’re getting UV interference. best thing I find is to use an L bracket in Mount your photo wise more inside your wing wall to be sheltered from direct sunlight and that’ll fix the issue