💅 TROUBLESHOOT POLY NAIL GEL TUTORIAL: Common Issues for Beginners | Expert Tips by GLOWTIPS

Welcome to the Glowtips Channel, your ultimate destination for all things nails! 💅💭 Here, we are dedicated to helping you create your dream nails with precision and ease.
In this video, we have got you covered with troubleshooting tips for one of the most popular nail enhancement techniques: Poly Nail Gel. 📚 If you're a beginner and have encountered common problems along the way, worry not! We are here to guide you through every step of the process and show you how to fix those pesky issues.
We are covering these issues in this video-
00:00 Intro
00:48 Problem #1: Using too much Poly Nail Gel
02:48 Problem #2: Using too little Poly Nail Gel
04:32 Problem #3: Using too much slip solution
05:12 Problem #4: Apply the gel too near to the cuticle and sidewall
05:48 Problem #5: Inconsistencies in the application
06:37 Problem #6: Using too much pressure to press the dual form onto the nail
07:54 Problem #7: Air bubbles in the gel
08:59 Problem #8: Lifting issue
10:21 Problem #9: Broken nail
11:51 Bonus tips
Whether you're struggling with lifting, bubbling, or uneven application, our expert tips and techniques will empower you to overcome these challenges. We believe that everyone deserves to have beautiful nails, and with our guidance, you'll gain the confidence to achieve stunning results right in the comfort of your own home. 💅💖#glowtipsnails
------------------------------
Products mentioned:
• Glowtips Poly Nail Gel Starter Kit (Customised with any 2 Poly Nail Gel shades!) bit.ly/3w4SsC8
(We are using Peach Red shade in this video)
• Glowtips Poly Nail Gel Kit FOR NON-UK CUSTOMERS bit.ly/3I7nop8
• Glowtips Bundle Kit - LED Nail Lamp + Poly Nail Gel Starter Kit bit.ly/3SdXGDu
• Glowtips 48W LED Nail Lamp bit.ly/3AnqaoU
• Glowtips Pink Tee Crush Gel Polish bit.ly/3R1Drd9
•Glowtips Base Coat Gel Polish bit.ly/3qvi7k4
•Glowtips 90's Gel Polish bit.ly/3HILJUc
•Glowtips Buttercup Gel Polish bit.ly/3Pbfwtc
•Glowtips Cotton Dream Gel Polish bit.ly/3qP6vfn
•Glowtips Love Endures Gel Polish bit.ly/3GUcOk5
•Glowtips High Gloss Top Coat Gel Polish bit.ly/3BzIjQN
SHOP US VIA www.glowtips.co.uk
---------------------------
Join us on social media 💌 -we'd love to connect!
Tiktok bit.ly/3po4SBe
Instagram bit.ly/3w6ml4I
Facebook bit.ly/3zZY4yH
Website glowtips.co.uk/
KZbin Channel bit.ly/3PqD3mj
Blog bit.ly/43JqydA
📧 Email us at [e-mail]
-------------------------
Other Poly Nail Gel tutorial videos:
🌟HOW TO do Poly Nail Gel short overlays on natural nails • 💅EASY POLY NAIL GEL OV...
🌟HOW TO remove Poly Nail Gel nails • 💅POLY NAIL GEL REMOVAL...
🌟HOW TO How To Do Nail Extensions Using GLOWTIPS Poly Nail Gel bit.ly/3CgDbBO

[@jhanakchaudhary6124]

Hey wht happens if we skip base coat

[@monikabogucka9103]

In my case- nothing :) i always skip base

[@glowtipsofficial]

Hi, we suggest you do not skip base coat. You can read the reason why here: glowtips.co.uk/pages/base-coat-polynailgel

[@amandajones4549]

It’s better with just primer in my experience.

[@irawoodard5144]

Thank- you so much 😊

[@glowtipsofficial]

Thank you for watching :) Hope you learn something

[@lindiwemokhondo6819]

Hi dear u explain nice and well understood. I'm a beginner i have bought a nail kit i was afraid to give it a try but now i have a confident that i would do it. Tnx for the videos from 🇿🇦

[@glowtipsofficial]

Thank you so much for your kind words! Remember, it's okay if it's not perfect the first time - that's completely normal. Poly Nail Gel does require some practice to master. Make sure to watch all our tutorial videos for the best tips and tricks. Keep practicing and enjoy your nail kit!

[@alicesmith1729]

Very helpful video. When I put mine nail in the heating lamp it was a burning felling is that normal. .

[@glowtipsofficial]

Thank you, I am glad that you find this video helpful. The burning sensation you feel when curing polygel under a nail lamp is likely due to the rapid polymerization process. When the UV or LED light hits the polygel, it triggers a chemical reaction that generates heat, known as an exothermic reaction. If you use our brand polygel and our nail lamp, you won't experience this burning sensation because we thoroughly tested our products together before production. If you are using a different brand, try using the low-power mode on your nail lamp. It will take longer to dry, but at least for the first 30 seconds cure until the polygel it's cured, then switch to the normal mode to continue curing. This process is called gradual curing. I hope this answers your question :)

[@glowtipsofficial]

I forgot to answer your question. Yes, it's normal for this to happen with gel products, including builder gel. It depends on the ingredients used by the manufacturer. The heat spike you feel is according to that.

[@manuelacallis1274]

When I put the gel with the dual forms on my nail it slides and slips around and doesn’t sit as tight as yours. So when I flip it over to try to smoothen the back side, the dual form always moves out of place. So I usually end up with crooked nails or thick back sides 😓 Help!

[@ovitaminkao111]

You need better products. I used to buy cheap ones and had same problem. Now im using spn acryl-o-gel and its amazing

[@glowtipsofficial]

Hello, I'm really sorry to hear that the polygel isn't meeting your expectations :( One tip you could try is placing it in a cool spot or the fridge for a few minutes to see if it firms up. Some polygel can be a bit runnier in warmer climates, so that might be affecting it. If this doesn't solve the issue, it might be best to reach out to the brand you purchased it from. Alternatively, you're welcome to check out the options on our website. I hope this advice is helpful! glowtips.co.uk/

[@susanpienaar5267]

Uv light lamp is needed to hold the nail with polygel in place and then you can cure it in uva Uvb lamp for 60 seconds.

[@glowtipsofficial]

@@susanpienaar5267 You are right, that's a great tip!

[@Kat.go.]

Heyyy so I noticed the same issue . I found it was because of the slip solution. So I would wait a bit for the slip to dry before purting it on the nail

[@christeegunzenhauser1680]

My nails are flatter and dual form pop off, is there anyway that i can do polygel without dual forms ive tried a few brands now

[@glowtipsofficial]

That's a great question! If you have flat nails, consider using a flatter dual form. We offer both curved and flat dual forms - you can check out the flatter ones here:glowtips.co.uk/search?q=dual+form . Besides dual forms, there are various methods for applying polygel nails. For instance, you can use paper forms, and here's our tutorial on that: kzbin.info/www/bejne/gpS3q4etpa5_la8 . Applying polygel over natural nails is another option, and we have a video guide for it here: kzbin.info/www/bejne/nWWpp6uCbL-Xb7s . You can also go for nail tips. Each of these methods offers unique benefits and can be chosen based on what you're looking to achieve, your comfort level with the technique, and the specific design you have in mind. Hope this helps you out!

[@kerrageouslynn9882]

Do you know how to remove the buffing marks before putting on the top coat? I find mine don’t look as smooth as others and it looks like you can see the scratches underneath the top coat

[@glowtipsofficial]

Hi, before I answer your question, may I know what do you use to buff your nails? Do you mean your real nails or polygel nail?

[@kerrageouslynn9882]

Polygel and I use a nail board or a nail file buffer

[@glowtipsofficial]

@@kerrageouslynn9882 Do you know how many grits is the nail file buffer? Example like 180 grits, 100 grits etc.

[@kerrageouslynn9882]

I do it is 80 grits

[@glowtipsofficial]

​@@kerrageouslynn9882 I'd recommend avoiding an 80grit file for your polygel nails as it's quite coarse and can be too abrasive. Polygel is a bit more delicate than other nail enhancements, so it's important to use a file that suit. A 180grit nail file would be much more suitable. If you need something a bit coarser, you could go down to a 100 grit file, but that should really be the lowest you go. Just remember, the lower the grit number, the rougher the file. We want to keep your nails looking beautiful and healthy, so choosing the right file is key!

[@ponnig3893]

I need for kit

[@char7945]

how do i know how much gel should be on the nail i never know how much and end up using too much gel :(

[@glowtipsofficial]

The amount of gel you use will vary based on whether you opt for long or short nails. For longer nails, a larger bead of gel is required, while shorter or overlay nails only need a smaller bead. The best way to determine the precise amount is through practice. As you continue, you'll naturally gauge how much product each nail requires. Remember, practice makes perfect. If you find you've applied too much gel on a nail, simply use the brush to transfer the excess to the next nail. Hope this helps 💗

[@missmya938]

Hey. For some reason my dual forms stick with the poly gel after curing them. It doesn't wanna come off. What can I do to prevent that?

[@glowtipsofficial]

Hello, thank you for watching our video. After curing the gel, it should be completely cured/dried. When you try to remove the dual form, your gel shouldn't remain intact with the dual form. If it is still sticky, it means it is not properly cured, and you will have to cure it under the lamp for a bit longer. Once you find out it has been completely cured, gently wiggle your dual form from left to right, and repeat this step until you can remove it. You can watch our tutorial here at the time stamp 4.13. I hope this helps :) kzbin.info/www/bejne/qXzSgGidh82nh7c

[@marthanewsome6375]

What if the nail forms don't fit your thumb. They are always too small for my thumb.

[@glowtipsofficial]

If you discover that the dual form is too small for your thumb, you have a couple of alternatives. First, you could opt for a larger dual form. Alternatively, use the largest dual form available and apply the first layer of polygel to your dual form and onto your thumb, followed by curing it under the nail lamp. After this, proceed with a second layer of polygel, this time applying it freehand, to fill in any uncovered areas. It's important to be meticulous during this process, ensuring that the polygel doesn't come into contact with your skin or get too close to the sidewalls of your nails. Hope this helps!

[@sanjeevuday5815]

Please how to remove in poly Nile tutorial.

[@glowtipsofficial]

Hi, please click the link to watch our removal polygel video: kzbin.info/www/bejne/haPPc6eegL17opo

[@spirituallylovingme-11]

Hi does the nail need to be cured

[@glowtipsofficial]

Hi Angela, yes you would have to cure Poly Nail Gel.

[@spirituallylovingme-11]

@@glowtipsofficial Thankyou

[@sonamkaur6157]

what is the process of removing?

[@glowtipsofficial]

We have created the removal video, you can watch it here - kzbin.info/www/bejne/iIiof5mseZxsgLc

[@Glitterbeauties]

Soooo too much slip solution can cause them to pop off 30 mins after too?! 😭 bc i think that’s what happened to me yesterday…also I was able to easily break the nails on half they felt more like plastic than gel 😮

[@glowtipsofficial]

Hello, thank you for tuning in. If you've used an excessive amount of slip solution, allow it to air dry a bit longer to ensure it's completely dry before curing. It's important to avoid trapping the slip solution within the polygel, as curing only the outer layer can lead to a less durable gel. You only need enough slip solution to easily maneuver the product around. Remember, practice makes perfect. Focus on one nail at a time and then cure.

[@majapesut9101]

Hii! How long do they last? Mine always just fall off they don't stay on even for 5 minutes 😢, but i didn't use base coat is that a problem? What does base coat do why is it important??

[@glowtipsofficial]

Hi, you will need base coat gel polish before applying Poly Nail Gel. You can read more on our blog here, we explain the reason why :) glowtips.co.uk/pages/base-coat-polynailgel

[@glowtipsofficial]

Poly Nail Gel nails usually lasts 2-3 weeks like other nail enhancement if applied properly :)

[@denimeier8675]

base gel is your anchor between your natural nail and your gel product for best adhesion

[@sherrystorrie4801]

My poly is watery coming out of the bottle. Is it bad?

[@glowtipsofficial]

Hi, this situation is quite uncommon and something we haven't come across previously. It appears that condensation is occurring inside the bottle, likely a result of air getting trapped inside, leading to moisture formation. If the product is less than three years old and its texture remains consistent, it should still be okay to use. However, to ensure the best application, it's advisable to use a cotton bud to absorb any excess moisture from the polygel before applying it to your nails.

[@jamiejam7749]

I bought Morvan poly gel. I buff my nails. I use a dehydrator, the nail gets hard and cures under the lamp but for some reason it is not sticking to my nail bed. The poly gel comes off completely. Does anybody know what I’m doing wrong?

[@glowtipsofficial]

Hi, thanks for reaching out and watching our video! I'm sorry to hear you're having trouble with your poly gel. Even though you've used a different brand, I'm here to help. It sounds like you're doing everything right with buffing and dehydrating. Have you tried applying a base coat right after the dehydrator? The base coat can enhance adhesion, helping the poly gel stick to your nail bed more effectively. Give this a try and see if it makes a difference!

[@charlottecardinal865]

That's what happens to me. Tried to do my thumb nail ×2 and no luck so I gave up for today lol

[@glowtipsofficial]

@@charlottecardinal865 Is the polygel not sticking to your nail too? 😕

[@ivyshylin-iw3kn]

Can I use actual alcohol Incase I'm out of slip solution ?

[@glowtipsofficial]

Good question! we have answer for your question, please read our blog post about it 🙂glowtips.co.uk/pages/what-are-some-alternatives-to-slip-solution

[@ivyshylin-iw3kn]

@@glowtipsofficial thanks for your quick response 🤗

[@glowtipsofficial]

Youre most welcome, glad to help!@@ivyshylin-iw3kn

[@brigittegallegos5689]

2:03 can I use alcohol i 3:17 incase I'm out of slip solution?

[@colourcrush]

I am an UV light alergic 😓 my finger tips get peeled nd sometimes it bleeds as well. Will happen the same problem If i use LED lamp ?

[@glowtipsofficial]

Hi, unfortunately both UV and LED lamps emit small amounts of UV rays. We suggest you to wear the fingerless tips black gloves and apply sun screen on your hand before using any of these nail lamps.

[@colourcrush]

@@glowtipsofficial thank u so much❤️

[@barbied0711]

I am a beginner. My problem is that after I hit it with the lamp, the polygel is like bendy and doesn’t harden all the way😢

[@glowtipsofficial]

Hello, there are several factors that might affect the curing of your polygel. Firstly, ensure your lamp is compatible, ideally 36w or more. For our polygel with our lamp, a 60-second cure is recommended. However, different brands might suggest different times, so it's best to follow the specific guidelines. If the polygel isn't fully cured, try extending the cure time by an additional 30-60 seconds to determine the ideal curing period for your product. Remember, complete curing is essential before applying any gel polish. Also, check out our other polygel video for more tips which you might find it helpful - kzbin.info/www/bejne/rmmVh5drbdt7pKs . Hope this helps :)

[@barbied0711]

Thank you❤️

[@glowtipsofficial]

@@barbied0711 You're welcome, happy to help!

[@massflate6635]

Yes poly gel for dummies that me

[@wendywool7038]

How come no one ever shows how thick the nail is created by showing the end???? I’ve been watching sooo many videos

[@gentlelove]

My polygel doesn't stick to my nails. Shalom you're loved 💔

[@glowtipsofficial]

Hi there, I'm really sorry to hear about the issues you're experiencing with your nails. There could be several reasons why your polygel nails aren't lasting, and without knowing your exact process, it's a bit tricky to pinpoint the cause. Have you had a chance to follow the steps outlined in our video? It's crucial not to skip any of them for the best results. Also, we have a troubleshooting video that might be helpful for you. You can watch it here and hopefully find some useful tips. kzbin.info/www/bejne/haPPc6eegL17opo

[@gentlelove]

@@glowtipsofficial I found that sandwiching my nail tip with polygel helps but they still lift after 3.5 days. I apply dehydrator and base then poly under nail then a reshaped duo form then polygel on top then a duo form on top pinch the forms together and UV light it till it's halfway solid then pull the forms off then clip the polygel then finish the UV light then paint.. Shalom you're loved 💔

[@gentlelove]

@@glowtipsofficial I also got the nail bed before the dehydrator. Shalom you're loved 💔

[@gentlelove]

@@glowtipsofficial please help shalom you're loved 💔

[@glowtipsofficial]

It looks like you've followed the right steps. Can you confirm if the polygel was completely cured or dry after being under the nail lamp? Also, it's crucial to ensure that the polygel didn't come into contact with your skin during the curing process