Troubleshooting the Ice Cube Stamper - Maniology LIVE!

[@LdyPrtrdg]

I actually practiced like you did in this video, and that helped a ton!! Thank you!

[@pnkmtlgd54]

Thanks for this video! I'm a visual learner and this helped me figure it out. My nails aren't perfect but not bad for a first try

[@purrlee2467]

I'm searching for a specific video, fast forwarded this one straight to the smashing of the ice cube to the plate. no regrets, still looking for the correct video

[@jessicam6881]

I have 7 or 8 ice cube stampers. I've tried everything including the techniques used in this video. 2 work good, 2 are hit & miss, the rest won't pick up anything. I have a clear monocle stamper & 2 duel ended stampers that I normally don't have issues with. Why won't some if my ice cube stampers work 😭

[@rebeccaeverhardt214]

I have the same problem and would like to know why it happens.

[@DebbieDoesNails]

I love the pads ready in the jar!!

[@Maniology]

Thank you!

[@kofoedsandy]

Can you do a video on how to use the very large patterns on the plate?

[@kristien2010]

That Hulk smash scared the jeebus out of me. And it hurt to watch. That poor stamper!

[@doughtyrose]

Thanks for the tips, I was doing the rock and roll motion and not picking up any image.

[@Maniology]

You're welcome! ❤

[@Velodust]

Thank you for this info. I was frustrated, but with practice comes perfect (not that I'm even close, I bearly managed to get 2 perfect transfers). I kept trying many times, what worked for me was a gentle scraping and even more gentle pick up. To be honest, I was like, how soft do I have to try this pick up?! Then I tried what to me seemed like a ridiculously soft and gentle pick up with the ice cube stamper, which ended up being the perfect amount of pressure.

[@Maniology]

You can do it! We always say that if you have difficult time picking up, always go lighter and swifter. We're so happy you have found your touch now. Keep it up, Velod. Have a beautiful day. Ren, from Maniology.

[@jacquelinedimattia774]

How do you clean a stamper!? Thanks for sharing 😘

[@TracyL-66]

A sticky lint roller after every stamp!

[@PinceladasyAlgoMas]

I've seen them suggesting scotch tape also.

[@Asil0831]

I got mine to work by wiping it with Art Naturals 91% alcohol and using Cirque Colors polish remover wipes. It stamps beautifully now. I could never get it to work even after viewing this video.

[@Maniology]

Thank you for the tip!

[@Asil0831]

This is my favorite stamper now. It’s a perfect size and it picks up the detail. It also worked beautifully on the gradient square (M052 French tip Plate).

[@colleenmcchesney1482]

Okay so lightly scrape the polish off for the fine lines of the design for pick up. I will have to practice that. Thanks for sharing this with us.

[@Maniology]

Practice makes perfect! Glad it was helpful!

[@rebeccaeverhardt214]

❤❤❤❤

[@rhondawise1897]

Will keep trying, how much nail polish you use

[@Maniology]

You should cover at least half of the design with polish. When having trouble, use more instead of less and use a lighter hand. We have other videos on stamping techniques that you may find helpful!

[@KMac348]

I couldn't figure out what I was doing wrong. Turns out I was pushing too hard and scraping multiple times. Thank you so much for this video, it works much better when you do it right! 😁

[@Maniology]

You're very welcome!

[@cindeepaschen3445]

Where do we get that cotton grabber?

[@Maniology]

It's on our site www.maniology.com, just search Pineapple Cotton Grabber or use this link maniology.com/products/maniology-pineapple-cotton-grabber 🤗🍍

[@EvilLynn222]

Thank you so much I think I was scraping too hard!

[@Maniology]

Glad we could help!

[@SnugglesFairie]

i heard someone say to put a clear stamper ona piece of paper before using. Do you have any idea what they meant?

[@bees_nail_art82]

The mean clean it with a light dish washing soap leave it on a piece of copy paper then put more copy paper on top then add a light book leave it for 24 hours for all the oils to go out of it but don’t leave it to long as it will go all sticky without some oil left in it

[@helenchavez2782]

Muy bien la explicacion, pero deberían poner subtítulos en español porque habemos mucha gente de habla hispana que también compra sus productos, solo es una sugerencia 😉

[@rickywu1071]

Two thumbs up

[@christydadamo7699]

Frustrating doesn’t even begin to describe how I feel towards this product. For every 20 stamp attempts I get a decent one. I’ve tried lightening my scraping, lightening my rolling, rolling front to back, side to side. I’m about to rip my hair out. What gives?! Edit: I finally got this to work by simply lightly stamping the plate and the image comes right up. No rolling at all.

[@lcoq19]

Maybe the polish is too thick or too thin? Or maybe it's drying too quickly? Are you able to follow up the movements as quickly as she does in the video? Or maybe the stamper itself has residual residue that's causing the polish to either not stick or stick too well? What exactly is happening when it doesn't work correctly?

[@christydadamo7699]

@@lcoq19 I finally figured out how to get this to work for me. Instead of any of the rolling nonsense I was trying to do I've simply been lightly pressing the stamper onto the plate. Just lightly stamp the plate and the image comes right up - works every time! I don't know why I didn't think to try this sooner.

[@laurenslegends5938]

I’ve done everything I’m supposed to and it doesn’t work

[@Maniology]

Hi Lauren, we are sorry to hear you are having trouble with the stamper. Please take a video on how you are currently stamping and either email us at [e-mail] or DM us directly on Facebook/Instagram so we can provide more targeted help to your issues.

[@carolklans-cerda641]

Love the hog smashing