How to Replace Fuel Pump 2000-06 GMC Yukon

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@GodlikeGTZ]

This is the most professional DIY video ive seen.

[@timwitte9313]

Excellent video. I wish all videos were like this. Not story telling, thorough, and good quality. Great job!

[@luisfernandosalassanchez7105]

I just bought TRQ fuel pump. I'm watching the video how to installed..thank you for the videos.

[@alohaerickson]

Great video. Watching it convinces me that I will be less frustrated bringing it to my mechanic who has the lift and can do this easier than my driveway on stands. If I were 30 years younger and had less arthritis, I would easily do this with this videos assistance. Mahalo

[@faceOFone]

Best DYI I think I’ve ever seen! Didn’t miss a detail… bravo!👏

[@DrAlexanderHamilton]

Great job!. The only thing I would add is while you're down there, I would blow out the gas and evap lines. If the pump is in need of replacing, I'd probably go ahead and change the evap system (cannister, solenoid, purge valve) as well and blow out the lines as those lines get filled with charcoal/carbon pellets when the cannister gets old. I know it was just about changing the fuel pump, but might as well do some preventive maintenance while you're down there. Just like most mechanics will change the Transmission seal when changing out a rear main seal. You're already there. Don't want to do that maintenance twice!

[@starcarpet]

Hands down the best video fort replacing the fuel pump. Only difference in my case was the fuel pump had "barb" style connectors to connect the 3 hoses to the pump. Had to order the tool and the rest was history. Thanks!

[@TRQ]

+Jason T with StarCarpetLV Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@Cmimss]

Thanks guys Just relpacedd this on my 07 Yukon Denali XL Just to find out my Fuel pump fuse blew and was the reason why it didnt want to start. But o well. My truck got 330,000 Miles. Pump was going to go out at any given day/ Night anyways. Thanks for the video

[@leonpatterson8445]

Excellent video! Thanks for the great detail! Too old to do it myself so now to find a good mechanic to tackle it.

[@buddyrebel_Garcia]

I bought this fuel pump from you guys. I’m about to install it tomorrow. I hope it is OEM quality and will last the life of the truck

[@morganos73]

Great step by step video! Very explanatory and made it seem simple!

[@DCValiant68]

What are the hoses inside the fuel tank for and called?

[@ArtRocha-r1b]

2002 GMC Yukon is out of fuel. The time I put fuel then it does not start. What is the problem?

[@Str8kustomz]

What’s the line for the blue cap? I have a 2003 Denali and it doesn’t have a line on the tank for that center one. I put the other 2 lines on sand have been driving it. But once I park I smell gas fumes

[@austinpowersfasha8878]

I have a special adapter for a fuel tank as well. Its a 14” piece of 2x12 sitting on a 2 ton floor jack. Check mate.

[@ryanunruh2683]

That frame is even a touch rustier than my 05 XL. Same configuration I ve got tho, so very helpful video. I could have used a bit more detailed instructions re the connectors tho, and what they're all for

[@ironpig701]

Great video. Think mines bad. Gauge says empty yet I know its full. And if I go in reverse real hard and slam on brakes the gauge then goes to full. Dont have a lift so on the ground it is but will be pretty much the same.

[@FBIsurveillance62]

Excellent video thanks for posting really appreciate it. Very detailed

[@kenlaing7529]

are no special tools to remove Fuel lines?

[@biringen]

i wonder why they did not put a accesshatch in the floor at factory

[@alexbee777]

What is the normal pressure in the system with this pump? The old pump was 95-100 psi, the new one was 55-60 psi. 🧐

[@2Jeezuzisreal]

My 05 yukon rusted out on top. Perfectly good pump. I am so mad at GM. I cut a hole in the backseat and put in a junkyard fuel pump has worked just fine for 4 years. I piled on the grease on top. Seal up the hole using the same metal piece with silicone or use a mastic like roofing "Ice and water "sheild. Peel and stick. Caution don't use a grinder. Use a hammer and chisel or a air chisel.

[@TRQ]

+KZbin guest Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ

[@freedomnugget9584]

Didn't even clean around the pump module before pulling it. And all that debris fell in and didn't clean out the fuel tank... great job! (sarcasm). Good bye new pump.

[@Hardgamer1016]

I was really looking to buy parts from you guys, but you don't ship to Canada so that's a big loss on your part. Need to expand the delivery more

[@rooseveltrainesjr7618]

Excellent job

[@fredgalles479]

Fuel gauge is not working properly now will not move when it is full any reason for it not to work

[@jeffreycoleman3038]

Great video

[@nitrozack3062]

Don’t you have to disconnect the fuel pump?

[@richlymann6451]

Hardest part is dropping the fuel tank. The pump is no problem. Pickup truck lifting the bed is easier than the suv

[@gfunkkowboy]

Good job brother My truck broke down I hit the gas tank with a hammer and it started again. Should I replace the fuel pump

[@faithw6038]

Yeah but look at some on the ground vids if you don't have a lift

[@joserosales1174]

I would say yes read that if you tap on it and it starts then the pump is at faulty.

[@ravenjohnson8986]

QqqQq

[@stevemcgill4328]

IVE GOT AN 03 YUKON,, AND MINE IS NOTHING LIKE THAT. BETTER BE MORE CLEAR ON YEARS. AND CONNECTIONS.

[@josezepeda4322]

Fully agree, wish I had read this comment before, could have spared me from snapping a connection onto the evap canister I didn’t know existed lol

[@josezepeda4322]

Mine was a 2000 btw. Some pretty big changes made apparently

[@terrilljohnson34]

I agree I have a 2002, nothing like this

[@tannorguy3825]

U gotta clean off rust before taking out. Cuz now whoever's car that is has rust in there gas tank

[@williamwatson3567]

I Wonder How Much is Usually Charged To Do That Job....? And How Much does an O.E.M. Dealer Pump Cost...? Just for Future Reference... I have a 2000 Yukon XL. I would Not Look forward to Doing that Job, Broke Down on the roadside Or in the Driveway...I wonder if Some Backyard Mechanics would even Tackle That Job...it could take all day or a weekend...! Just Curious.... BillinL.A. 1-23-2021.

[@EB4L9964]

Well mine just went out and my mechanic wants 180 labor with fuel pump cost and gives me 3 month warranty on work done. I think that's fair.

[@KahlilBurn]

Baker CA wanted to charge me 900

[@sandramckay9972]

My son is a diesel mechanic and said it's actually pretty easy, but definitely NOT to do it without a shop. Our 2001 yukon has over 300,000miles on it, I have been doing a lot of replacements and fixes but this isn't one I can do on my own without a way to get the rig up on a wrack etc.

[@smnkm4ehfer]

Honestly they're not that hard of a job, under an hour for a competent person with the correct tools on hand, and thats on the ground, and not rushing.

[@biringen]

i would consider make a hatch in the floor just above the pump. im guessing i need to swap my pump soon

[@DavidGregoire_]

My 2003 Yukon looks nothing near that

[@josezepeda4322]

Same with 2000