How to Replace Trailing Arm Bushings 2000-2007 Ford Focus

Buy Now!
New Trailing Arm Bushing from 1AAuto.com 1aau.to/ia/1ASF...
New Trailing Arm Bushing from 1AAuto.com 1aau.to/ia/1ASM...
This video shows you how to install new trailing arm bushings from TRQ on your 2000-2007 Ford Focus.
This repair was done on a 2006 Ford Focus ZX4 2.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2000 Ford Focus
2001 Ford Focus
2002 Ford Focus
2003 Ford Focus
2004 Ford Focus
2005 Ford Focus
2006 Ford Focus
2007 Ford Focus
Tools you will need:
• 19mm Wrench 1aau.to/oabc/1A...
• 15mm Socket 1aau.to/ob3G/1A...
• 19mm Socket
• Bushing Removal Tool
• Air Chisel
• Ratchet 1aau.to/ob5B/1A...
• Socket Extensions 1aau.to/ob3G/1A...
• Torque Wrench 1aau.to/oa8h/1A...
• Block of Wood
• Gloves 1aau.to/oaXB/1A...
• Marker / Writing Utensil
• Safety Glasses
• Silicone Paste
• Floor Jack 1aau.to/oauM/1A...
• Hammer
• Jack Stands 1aau.to/oagQ/1A...
• Pole Jack
• Wheel Chocks
• Wire Brush 1aau.to/oxs/1AX...
Subscribe: / @trq
Check out our playlist:
Ford Focus 1st Generation 2000-2007: • Ford Focus 1st Generat...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@p.istaker8862]

Did you pull that car out of the ocean ?

[@edgardobautista650]

Excelente curso muy bien

[@Mattyk414]

Your bolts will likely be rust-welded into place. Not gonna happen. Also, many models have sway bar links. I'm running bolts to my shop, after a special trip to the dealer.