How to Replace A/C Condenser and Receiver Drier Assembly 2015-2020 GMC Yukon XL

Buy Now!
New A/C Condenser and Receiver Drier Assembly from 1AAuto.com 1aau.to/ia/1AAC...
This video shows you how to install an A/C condenser on your 2015-2020 GMC Yukon XL.
A punctured, clogged, rusted, or damaged AC condenser will affect the efficiency and temperature levels of your car or truck's air conditioning.
PLEASE NOTE: Before attempting this repair, have your AC system's refrigerant properly removed by a qualified technician.
This process should be similar on the following vehicles:
2015 GMC Yukon XL
2016 GMC Yukon XL
2017 GMC Yukon XL
2018 GMC Yukon XL
2019 GMC Yukon XL
2020 GMC Yukon XL
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obgW/1A...
• Pry Bar 1aau.to/oRT/1AX...
• 10mm Socket 1aau.to/oa57/1A...
• 13mm Socket 1aau.to/obpu/1A...
• 8mm Socket 1aau.to/oa57/1A...
• Trim Tool Set 1aau.to/o8u/1AX...
• Ratchet 1aau.to/obwX/1A...
• Socket Extensions 1aau.to/obpu/1A...
• Torque Wrench 1aau.to/oaAT/1A...
• Magnet - Extendable
• Pick 1aau.to/oMF/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@johnperez93640]

This channel shows EVERY repair like "it just pops off", like every step is just simple and easy. Making the viewer think and feel that its easy and hopefully theyll buy the parts from them.

[@NonStopActionn]

Would be nice to see what kind of oil to put back into the condenser as well and the process of doing it

[@sashaviroviy5065]

Access to the radiator, lines and brackets will be easier and no leak mess if to remove crossmember, under filter box tray, frame that support that tray, and loose reserve battery tray

[@jarrodcombs8138]

I just poured 2 oz of oil in the big hole before installing it and it worked out perfect.

[@sashaviroviy5065]

If transmission line is difficult to snap into place remove the nut that gas C-clip on it with 19 mm(3/4”) wrench, and install the line in much better position, then install that nut. Works much easier this way

[@karlfadus9794]

The core support is removable there are 3 10mm Bolts on each end pointing up from under the support and one 13mm in the front would have been much easier

[@johnlukevinc]

What are the sizes of the seal washers that need to be replaced? Is there a kit or set online that I should order before doing this?

[@hectorromero675]

Do I just pour oil into condenser and does it matter with side high or low side?

[@elden8785]

Did u change the You accumulator/ dryer when changing out the condenser

[@timyarbro4783]

Great video. Thanks

[@TravisKenimer]

When was the drier replaced? Is it built into the condenser?

[@TRQ]

+Travis Kenimer Yes, the drier will be built in the condenser.

[@thebeardedone1225]

I have a 2015 gmc 3500 hd duromax, and it has a separate trans cooler, and the normal procedure like this doesn't work. Do you have a video for heavy duty diesel trucks?

[@whats4dena1985]

Thank you so much!

[@megakhan2005]

This has to be the worst video A1 has ever mad. Everything is difficult to see what your doing.

[@danielarias651]

Good video, thanks!

[@danielarias651]

Good video, thanks!